acrn-kernel/arch/ppc64/kernel/bpa_iommu.h

66 lines
1.7 KiB
C

#ifndef BPA_IOMMU_H
#define BPA_IOMMU_H
/* some constants */
enum {
/* segment table entries */
IOST_VALID_MASK = 0x8000000000000000ul,
IOST_TAG_MASK = 0x3000000000000000ul,
IOST_PT_BASE_MASK = 0x000003fffffff000ul,
IOST_NNPT_MASK = 0x0000000000000fe0ul,
IOST_PS_MASK = 0x000000000000000ful,
IOST_PS_4K = 0x1,
IOST_PS_64K = 0x3,
IOST_PS_1M = 0x5,
IOST_PS_16M = 0x7,
/* iopt tag register */
IOPT_VALID_MASK = 0x0000000200000000ul,
IOPT_TAG_MASK = 0x00000001fffffffful,
/* iopt cache register */
IOPT_PROT_MASK = 0xc000000000000000ul,
IOPT_PROT_NONE = 0x0000000000000000ul,
IOPT_PROT_READ = 0x4000000000000000ul,
IOPT_PROT_WRITE = 0x8000000000000000ul,
IOPT_PROT_RW = 0xc000000000000000ul,
IOPT_COHERENT = 0x2000000000000000ul,
IOPT_ORDER_MASK = 0x1800000000000000ul,
/* order access to same IOID/VC on same address */
IOPT_ORDER_ADDR = 0x0800000000000000ul,
/* similar, but only after a write access */
IOPT_ORDER_WRITES = 0x1000000000000000ul,
/* Order all accesses to same IOID/VC */
IOPT_ORDER_VC = 0x1800000000000000ul,
IOPT_RPN_MASK = 0x000003fffffff000ul,
IOPT_HINT_MASK = 0x0000000000000800ul,
IOPT_IOID_MASK = 0x00000000000007fful,
IOSTO_ENABLE = 0x8000000000000000ul,
IOSTO_ORIGIN = 0x000003fffffff000ul,
IOSTO_HW = 0x0000000000000800ul,
IOSTO_SW = 0x0000000000000400ul,
IOCMD_CONF_TE = 0x0000800000000000ul,
/* memory mapped registers */
IOC_PT_CACHE_DIR = 0x000,
IOC_ST_CACHE_DIR = 0x800,
IOC_PT_CACHE_REG = 0x910,
IOC_ST_ORIGIN = 0x918,
IOC_CONF = 0x930,
/* The high bit needs to be set on every DMA address,
only 2GB are addressable */
BPA_DMA_VALID = 0x80000000,
BPA_DMA_MASK = 0x7fffffff,
};
void bpa_init_iommu(void);
#endif