183 lines
7.6 KiB
ReStructuredText
183 lines
7.6 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
=======================
|
|
Energy Model of devices
|
|
=======================
|
|
|
|
1. Overview
|
|
-----------
|
|
|
|
The Energy Model (EM) framework serves as an interface between drivers knowing
|
|
the power consumed by devices at various performance levels, and the kernel
|
|
subsystems willing to use that information to make energy-aware decisions.
|
|
|
|
The source of the information about the power consumed by devices can vary greatly
|
|
from one platform to another. These power costs can be estimated using
|
|
devicetree data in some cases. In others, the firmware will know better.
|
|
Alternatively, userspace might be best positioned. And so on. In order to avoid
|
|
each and every client subsystem to re-implement support for each and every
|
|
possible source of information on its own, the EM framework intervenes as an
|
|
abstraction layer which standardizes the format of power cost tables in the
|
|
kernel, hence enabling to avoid redundant work.
|
|
|
|
The power values might be expressed in milli-Watts or in an 'abstract scale'.
|
|
Multiple subsystems might use the EM and it is up to the system integrator to
|
|
check that the requirements for the power value scale types are met. An example
|
|
can be found in the Energy-Aware Scheduler documentation
|
|
Documentation/scheduler/sched-energy.rst. For some subsystems like thermal or
|
|
powercap power values expressed in an 'abstract scale' might cause issues.
|
|
These subsystems are more interested in estimation of power used in the past,
|
|
thus the real milli-Watts might be needed. An example of these requirements can
|
|
be found in the Intelligent Power Allocation in
|
|
Documentation/driver-api/thermal/power_allocator.rst.
|
|
Kernel subsystems might implement automatic detection to check whether EM
|
|
registered devices have inconsistent scale (based on EM internal flag).
|
|
Important thing to keep in mind is that when the power values are expressed in
|
|
an 'abstract scale' deriving real energy in milli-Joules would not be possible.
|
|
|
|
The figure below depicts an example of drivers (Arm-specific here, but the
|
|
approach is applicable to any architecture) providing power costs to the EM
|
|
framework, and interested clients reading the data from it::
|
|
|
|
+---------------+ +-----------------+ +---------------+
|
|
| Thermal (IPA) | | Scheduler (EAS) | | Other |
|
|
+---------------+ +-----------------+ +---------------+
|
|
| | em_cpu_energy() |
|
|
| | em_cpu_get() |
|
|
+---------+ | +---------+
|
|
| | |
|
|
v v v
|
|
+---------------------+
|
|
| Energy Model |
|
|
| Framework |
|
|
+---------------------+
|
|
^ ^ ^
|
|
| | | em_dev_register_perf_domain()
|
|
+----------+ | +---------+
|
|
| | |
|
|
+---------------+ +---------------+ +--------------+
|
|
| cpufreq-dt | | arm_scmi | | Other |
|
|
+---------------+ +---------------+ +--------------+
|
|
^ ^ ^
|
|
| | |
|
|
+--------------+ +---------------+ +--------------+
|
|
| Device Tree | | Firmware | | ? |
|
|
+--------------+ +---------------+ +--------------+
|
|
|
|
In case of CPU devices the EM framework manages power cost tables per
|
|
'performance domain' in the system. A performance domain is a group of CPUs
|
|
whose performance is scaled together. Performance domains generally have a
|
|
1-to-1 mapping with CPUFreq policies. All CPUs in a performance domain are
|
|
required to have the same micro-architecture. CPUs in different performance
|
|
domains can have different micro-architectures.
|
|
|
|
|
|
2. Core APIs
|
|
------------
|
|
|
|
2.1 Config options
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
CONFIG_ENERGY_MODEL must be enabled to use the EM framework.
|
|
|
|
|
|
2.2 Registration of performance domains
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Drivers are expected to register performance domains into the EM framework by
|
|
calling the following API::
|
|
|
|
int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
|
|
struct em_data_callback *cb, cpumask_t *cpus, bool milliwatts);
|
|
|
|
Drivers must provide a callback function returning <frequency, power> tuples
|
|
for each performance state. The callback function provided by the driver is free
|
|
to fetch data from any relevant location (DT, firmware, ...), and by any mean
|
|
deemed necessary. Only for CPU devices, drivers must specify the CPUs of the
|
|
performance domains using cpumask. For other devices than CPUs the last
|
|
argument must be set to NULL.
|
|
The last argument 'milliwatts' is important to set with correct value. Kernel
|
|
subsystems which use EM might rely on this flag to check if all EM devices use
|
|
the same scale. If there are different scales, these subsystems might decide
|
|
to: return warning/error, stop working or panic.
|
|
See Section 3. for an example of driver implementing this
|
|
callback, and kernel/power/energy_model.c for further documentation on this
|
|
API.
|
|
|
|
|
|
2.3 Accessing performance domains
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
There are two API functions which provide the access to the energy model:
|
|
em_cpu_get() which takes CPU id as an argument and em_pd_get() with device
|
|
pointer as an argument. It depends on the subsystem which interface it is
|
|
going to use, but in case of CPU devices both functions return the same
|
|
performance domain.
|
|
|
|
Subsystems interested in the energy model of a CPU can retrieve it using the
|
|
em_cpu_get() API. The energy model tables are allocated once upon creation of
|
|
the performance domains, and kept in memory untouched.
|
|
|
|
The energy consumed by a performance domain can be estimated using the
|
|
em_cpu_energy() API. The estimation is performed assuming that the schedutil
|
|
CPUfreq governor is in use in case of CPU device. Currently this calculation is
|
|
not provided for other type of devices.
|
|
|
|
More details about the above APIs can be found in include/linux/energy_model.h.
|
|
|
|
|
|
3. Example driver
|
|
-----------------
|
|
|
|
This section provides a simple example of a CPUFreq driver registering a
|
|
performance domain in the Energy Model framework using the (fake) 'foo'
|
|
protocol. The driver implements an est_power() function to be provided to the
|
|
EM framework::
|
|
|
|
-> drivers/cpufreq/foo_cpufreq.c
|
|
|
|
01 static int est_power(unsigned long *mW, unsigned long *KHz,
|
|
02 struct device *dev)
|
|
03 {
|
|
04 long freq, power;
|
|
05
|
|
06 /* Use the 'foo' protocol to ceil the frequency */
|
|
07 freq = foo_get_freq_ceil(dev, *KHz);
|
|
08 if (freq < 0);
|
|
09 return freq;
|
|
10
|
|
11 /* Estimate the power cost for the dev at the relevant freq. */
|
|
12 power = foo_estimate_power(dev, freq);
|
|
13 if (power < 0);
|
|
14 return power;
|
|
15
|
|
16 /* Return the values to the EM framework */
|
|
17 *mW = power;
|
|
18 *KHz = freq;
|
|
19
|
|
20 return 0;
|
|
21 }
|
|
22
|
|
23 static int foo_cpufreq_init(struct cpufreq_policy *policy)
|
|
24 {
|
|
25 struct em_data_callback em_cb = EM_DATA_CB(est_power);
|
|
26 struct device *cpu_dev;
|
|
27 int nr_opp, ret;
|
|
28
|
|
29 cpu_dev = get_cpu_device(cpumask_first(policy->cpus));
|
|
30
|
|
31 /* Do the actual CPUFreq init work ... */
|
|
32 ret = do_foo_cpufreq_init(policy);
|
|
33 if (ret)
|
|
34 return ret;
|
|
35
|
|
36 /* Find the number of OPPs for this policy */
|
|
37 nr_opp = foo_get_nr_opp(policy);
|
|
38
|
|
39 /* And register the new performance domain */
|
|
40 em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus,
|
|
41 true);
|
|
42
|
|
43 return 0;
|
|
44 }
|