441 lines
11 KiB
C
441 lines
11 KiB
C
/*
|
|
* hades-pci.c - Hardware specific PCI BIOS functions the Hades Atari clone.
|
|
*
|
|
* Written by Wout Klaren.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <asm/io.h>
|
|
|
|
#if 0
|
|
# define DBG_DEVS(args) printk args
|
|
#else
|
|
# define DBG_DEVS(args)
|
|
#endif
|
|
|
|
#if defined(CONFIG_PCI) && defined(CONFIG_HADES)
|
|
|
|
#include <linux/slab.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include <asm/atarihw.h>
|
|
#include <asm/atariints.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/pci.h>
|
|
|
|
#define HADES_MEM_BASE 0x80000000
|
|
#define HADES_MEM_SIZE 0x20000000
|
|
#define HADES_CONFIG_BASE 0xA0000000
|
|
#define HADES_CONFIG_SIZE 0x10000000
|
|
#define HADES_IO_BASE 0xB0000000
|
|
#define HADES_IO_SIZE 0x10000000
|
|
#define HADES_VIRT_IO_SIZE 0x00010000 /* Only 64k is remapped and actually used. */
|
|
|
|
#define N_SLOTS 4 /* Number of PCI slots. */
|
|
|
|
static const char pci_mem_name[] = "PCI memory space";
|
|
static const char pci_io_name[] = "PCI I/O space";
|
|
static const char pci_config_name[] = "PCI config space";
|
|
|
|
static struct resource config_space = {
|
|
.name = pci_config_name,
|
|
.start = HADES_CONFIG_BASE,
|
|
.end = HADES_CONFIG_BASE + HADES_CONFIG_SIZE - 1
|
|
};
|
|
static struct resource io_space = {
|
|
.name = pci_io_name,
|
|
.start = HADES_IO_BASE,
|
|
.end = HADES_IO_BASE + HADES_IO_SIZE - 1
|
|
};
|
|
|
|
static const unsigned long pci_conf_base_phys[] = {
|
|
0xA0080000, 0xA0040000, 0xA0020000, 0xA0010000
|
|
};
|
|
static unsigned long pci_conf_base_virt[N_SLOTS];
|
|
static unsigned long pci_io_base_virt;
|
|
|
|
/*
|
|
* static void *mk_conf_addr(unsigned char bus, unsigned char device_fn,
|
|
* unsigned char where)
|
|
*
|
|
* Calculate the address of the PCI configuration area of the given
|
|
* device.
|
|
*
|
|
* BUG: boards with multiple functions are probably not correctly
|
|
* supported.
|
|
*/
|
|
|
|
static void *mk_conf_addr(struct pci_dev *dev, int where)
|
|
{
|
|
int device = dev->devfn >> 3, function = dev->devfn & 7;
|
|
void *result;
|
|
|
|
DBG_DEVS(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p)\n",
|
|
dev->bus->number, dev->devfn, where, pci_addr));
|
|
|
|
if (device > 3)
|
|
{
|
|
DBG_DEVS(("mk_conf_addr: device (%d) > 3, returning NULL\n", device));
|
|
return NULL;
|
|
}
|
|
|
|
if (dev->bus->number != 0)
|
|
{
|
|
DBG_DEVS(("mk_conf_addr: bus (%d) > 0, returning NULL\n", device));
|
|
return NULL;
|
|
}
|
|
|
|
result = (void *) (pci_conf_base_virt[device] | (function << 8) | (where));
|
|
DBG_DEVS(("mk_conf_addr: returning pci_addr 0x%lx\n", (unsigned long) result));
|
|
return result;
|
|
}
|
|
|
|
static int hades_read_config_byte(struct pci_dev *dev, int where, u8 *value)
|
|
{
|
|
volatile unsigned char *pci_addr;
|
|
|
|
*value = 0xff;
|
|
|
|
if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
*value = *pci_addr;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int hades_read_config_word(struct pci_dev *dev, int where, u16 *value)
|
|
{
|
|
volatile unsigned short *pci_addr;
|
|
|
|
*value = 0xffff;
|
|
|
|
if (where & 0x1)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
*value = le16_to_cpu(*pci_addr);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int hades_read_config_dword(struct pci_dev *dev, int where, u32 *value)
|
|
{
|
|
volatile unsigned int *pci_addr;
|
|
unsigned char header_type;
|
|
int result;
|
|
|
|
*value = 0xffffffff;
|
|
|
|
if (where & 0x3)
|
|
return PCIBIOS_BAD_REGISTER_NUMBER;
|
|
|
|
if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
*value = le32_to_cpu(*pci_addr);
|
|
|
|
/*
|
|
* Check if the value is an address on the bus. If true, add the
|
|
* base address of the PCI memory or PCI I/O area on the Hades.
|
|
*/
|
|
|
|
if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
|
|
&header_type)) != PCIBIOS_SUCCESSFUL)
|
|
return result;
|
|
|
|
if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
|
|
((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
|
|
(where <= PCI_BASE_ADDRESS_5))))
|
|
{
|
|
if ((*value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO)
|
|
{
|
|
/*
|
|
* Base address register that contains an I/O address. If the
|
|
* address is valid on the Hades (0 <= *value < HADES_VIRT_IO_SIZE),
|
|
* add 'pci_io_base_virt' to the value.
|
|
*/
|
|
|
|
if (*value < HADES_VIRT_IO_SIZE)
|
|
*value += pci_io_base_virt;
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* Base address register that contains an memory address. If the
|
|
* address is valid on the Hades (0 <= *value < HADES_MEM_SIZE),
|
|
* add HADES_MEM_BASE to the value.
|
|
*/
|
|
|
|
if (*value == 0)
|
|
{
|
|
/*
|
|
* Base address is 0. Test if this base
|
|
* address register is used.
|
|
*/
|
|
|
|
*pci_addr = 0xffffffff;
|
|
if (*pci_addr != 0)
|
|
{
|
|
*pci_addr = *value;
|
|
if (*value < HADES_MEM_SIZE)
|
|
*value += HADES_MEM_BASE;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (*value < HADES_MEM_SIZE)
|
|
*value += HADES_MEM_BASE;
|
|
}
|
|
}
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int hades_write_config_byte(struct pci_dev *dev, int where, u8 value)
|
|
{
|
|
volatile unsigned char *pci_addr;
|
|
|
|
if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
*pci_addr = value;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int hades_write_config_word(struct pci_dev *dev, int where, u16 value)
|
|
{
|
|
volatile unsigned short *pci_addr;
|
|
|
|
if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
*pci_addr = cpu_to_le16(value);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int hades_write_config_dword(struct pci_dev *dev, int where, u32 value)
|
|
{
|
|
volatile unsigned int *pci_addr;
|
|
unsigned char header_type;
|
|
int result;
|
|
|
|
if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
/*
|
|
* Check if the value is an address on the bus. If true, subtract the
|
|
* base address of the PCI memory or PCI I/O area on the Hades.
|
|
*/
|
|
|
|
if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
|
|
&header_type)) != PCIBIOS_SUCCESSFUL)
|
|
return result;
|
|
|
|
if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
|
|
((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
|
|
(where <= PCI_BASE_ADDRESS_5))))
|
|
{
|
|
if ((value & PCI_BASE_ADDRESS_SPACE) ==
|
|
PCI_BASE_ADDRESS_SPACE_IO)
|
|
{
|
|
/*
|
|
* I/O address. Check if the address is valid address on
|
|
* the Hades (pci_io_base_virt <= value < pci_io_base_virt +
|
|
* HADES_VIRT_IO_SIZE) or if the value is 0xffffffff. If not
|
|
* true do not write the base address register. If it is a
|
|
* valid base address subtract 'pci_io_base_virt' from the value.
|
|
*/
|
|
|
|
if ((value >= pci_io_base_virt) && (value < (pci_io_base_virt +
|
|
HADES_VIRT_IO_SIZE)))
|
|
value -= pci_io_base_virt;
|
|
else
|
|
{
|
|
if (value != 0xffffffff)
|
|
return PCIBIOS_SET_FAILED;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/*
|
|
* Memory address. Check if the address is valid address on
|
|
* the Hades (HADES_MEM_BASE <= value < HADES_MEM_BASE + HADES_MEM_SIZE) or
|
|
* if the value is 0xffffffff. If not true do not write
|
|
* the base address register. If it is a valid base address
|
|
* subtract HADES_MEM_BASE from the value.
|
|
*/
|
|
|
|
if ((value >= HADES_MEM_BASE) && (value < (HADES_MEM_BASE + HADES_MEM_SIZE)))
|
|
value -= HADES_MEM_BASE;
|
|
else
|
|
{
|
|
if (value != 0xffffffff)
|
|
return PCIBIOS_SET_FAILED;
|
|
}
|
|
}
|
|
}
|
|
|
|
*pci_addr = cpu_to_le32(value);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
/*
|
|
* static inline void hades_fixup(void)
|
|
*
|
|
* Assign IRQ numbers as used by Linux to the interrupt pins
|
|
* of the PCI cards.
|
|
*/
|
|
|
|
static void __init hades_fixup(int pci_modify)
|
|
{
|
|
char irq_tab[4] = {
|
|
[0] = IRQ_TT_MFP_IO0, /* Slot 0. */
|
|
[1] = IRQ_TT_MFP_IO1, /* Slot 1. */
|
|
[2] = IRQ_TT_MFP_SCC, /* Slot 2. */
|
|
[3] = IRQ_TT_MFP_SCSIDMA /* Slot 3. */
|
|
};
|
|
struct pci_dev *dev = NULL;
|
|
unsigned char slot;
|
|
|
|
/*
|
|
* Go through all devices, fixing up irqs as we see fit:
|
|
*/
|
|
|
|
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
|
|
{
|
|
if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE)
|
|
{
|
|
slot = PCI_SLOT(dev->devfn); /* Determine slot number. */
|
|
dev->irq = irq_tab[slot];
|
|
if (pci_modify)
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* static void hades_conf_device(struct pci_dev *dev)
|
|
*
|
|
* Machine dependent Configure the given device.
|
|
*
|
|
* Parameters:
|
|
*
|
|
* dev - the pci device.
|
|
*/
|
|
|
|
static void __init hades_conf_device(struct pci_dev *dev)
|
|
{
|
|
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
|
|
}
|
|
|
|
static struct pci_ops hades_pci_ops = {
|
|
.read_byte = hades_read_config_byte,
|
|
.read_word = hades_read_config_word,
|
|
.read_dword = hades_read_config_dword,
|
|
.write_byte = hades_write_config_byte,
|
|
.write_word = hades_write_config_word,
|
|
.write_dword = hades_write_config_dword
|
|
};
|
|
|
|
/*
|
|
* struct pci_bus_info *init_hades_pci(void)
|
|
*
|
|
* Machine specific initialisation:
|
|
*
|
|
* - Allocate and initialise a 'pci_bus_info' structure
|
|
* - Initialise hardware
|
|
*
|
|
* Result: pointer to 'pci_bus_info' structure.
|
|
*/
|
|
|
|
struct pci_bus_info * __init init_hades_pci(void)
|
|
{
|
|
struct pci_bus_info *bus;
|
|
int i;
|
|
|
|
/*
|
|
* Remap I/O and configuration space.
|
|
*/
|
|
|
|
pci_io_base_virt = (unsigned long) ioremap(HADES_IO_BASE, HADES_VIRT_IO_SIZE);
|
|
|
|
for (i = 0; i < N_SLOTS; i++)
|
|
pci_conf_base_virt[i] = (unsigned long) ioremap(pci_conf_base_phys[i], 0x10000);
|
|
|
|
/*
|
|
* Allocate memory for bus info structure.
|
|
*/
|
|
|
|
bus = kzalloc(sizeof(struct pci_bus_info), GFP_KERNEL);
|
|
if (unlikely(!bus))
|
|
goto iounmap_base_virt;
|
|
|
|
/*
|
|
* Claim resources. The m68k has no separate I/O space, both
|
|
* PCI memory space and PCI I/O space are in memory space. Therefore
|
|
* the I/O resources are requested in memory space as well.
|
|
*/
|
|
|
|
if (unlikely(request_resource(&iomem_resource, &config_space) != 0))
|
|
goto free_bus;
|
|
|
|
if (unlikely(request_resource(&iomem_resource, &io_space) != 0))
|
|
goto release_config_space;
|
|
|
|
bus->mem_space.start = HADES_MEM_BASE;
|
|
bus->mem_space.end = HADES_MEM_BASE + HADES_MEM_SIZE - 1;
|
|
bus->mem_space.name = pci_mem_name;
|
|
#if 1
|
|
if (unlikely(request_resource(&iomem_resource, &bus->mem_space) != 0))
|
|
goto release_io_space;
|
|
#endif
|
|
bus->io_space.start = pci_io_base_virt;
|
|
bus->io_space.end = pci_io_base_virt + HADES_VIRT_IO_SIZE - 1;
|
|
bus->io_space.name = pci_io_name;
|
|
#if 1
|
|
if (unlikely(request_resource(&ioport_resource, &bus->io_space) != 0))
|
|
goto release_bus_mem_space;
|
|
#endif
|
|
/*
|
|
* Set hardware dependent functions.
|
|
*/
|
|
|
|
bus->m68k_pci_ops = &hades_pci_ops;
|
|
bus->fixup = hades_fixup;
|
|
bus->conf_device = hades_conf_device;
|
|
|
|
/*
|
|
* Select high to low edge for PCI interrupts.
|
|
*/
|
|
|
|
tt_mfp.active_edge &= ~0x27;
|
|
|
|
return bus;
|
|
|
|
release_bus_mem_space:
|
|
release_resource(&bus->mem_space);
|
|
release_io_space:
|
|
release_resource(&io_space);
|
|
release_config_space:
|
|
release_resource(&config_space);
|
|
free_bus:
|
|
kfree(bus);
|
|
iounmap_base_virt:
|
|
iounmap((void *)pci_io_base_virt);
|
|
|
|
for (i = 0; i < N_SLOTS; i++)
|
|
iounmap((void *)pci_conf_base_virt[i]);
|
|
|
|
return NULL;
|
|
}
|
|
#endif
|