165 lines
2.8 KiB
Plaintext
165 lines
2.8 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree file for ESPRESSObin-Ultra board.
|
|
* Copyright (C) 2019 Globalscale technologies, Inc.
|
|
*
|
|
* Jason Hung <jhung@globalscaletechnologies.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "armada-3720-espressobin.dtsi"
|
|
|
|
/ {
|
|
model = "Globalscale Marvell ESPRESSOBin Ultra Board";
|
|
compatible = "globalscale,espressobin-ultra", "globalscale,espressobin",
|
|
"marvell,armada3720", "marvell,armada3710";
|
|
|
|
aliases {
|
|
/* ethernet1 is WAN port */
|
|
ethernet1 = &switch0port5;
|
|
ethernet2 = &switch0port1;
|
|
ethernet3 = &switch0port2;
|
|
ethernet4 = &switch0port3;
|
|
ethernet5 = &switch0port4;
|
|
};
|
|
|
|
reg_usb3_vbus: usb3-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb3-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&gpionb 19 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb3_phy: usb3-phy {
|
|
compatible = "usb-nop-xceiv";
|
|
vcc-supply = <®_usb3_vbus>;
|
|
};
|
|
|
|
gpio-leds {
|
|
pinctrl-names = "default";
|
|
compatible = "gpio-leds";
|
|
/* No assigned functions to the LEDs by default */
|
|
led1 {
|
|
label = "ebin-ultra:blue:led1";
|
|
gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
|
|
};
|
|
led2 {
|
|
label = "ebin-ultra:green:led2";
|
|
gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
led3 {
|
|
label = "ebin-ultra:red:led3";
|
|
gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
led4 {
|
|
label = "ebin-ultra:yellow:led4";
|
|
gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdhci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci1 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&spi0 {
|
|
flash@0 {
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "firmware";
|
|
reg = <0x0 0x3e0000>;
|
|
};
|
|
partition@3e0000 {
|
|
label = "hw-info";
|
|
reg = <0x3e0000 0x10000>;
|
|
read-only;
|
|
};
|
|
partition@3f0000 {
|
|
label = "u-boot-env";
|
|
reg = <0x3f0000 0x10000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
rtc@51 {
|
|
compatible = "nxp,pcf8563";
|
|
reg = <0x51>;
|
|
};
|
|
};
|
|
|
|
&usb3 {
|
|
usb-phy = <&usb3_phy>;
|
|
};
|
|
|
|
&mdio {
|
|
extphy: ethernet-phy@1 {
|
|
reg = <1>;
|
|
|
|
reset-gpios = <&gpionb 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
reg = <3>;
|
|
|
|
reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>;
|
|
|
|
ports {
|
|
switch0port1: port@1 {
|
|
reg = <1>;
|
|
label = "lan0";
|
|
phy-handle = <&switch0phy0>;
|
|
};
|
|
|
|
switch0port2: port@2 {
|
|
reg = <2>;
|
|
label = "lan1";
|
|
phy-handle = <&switch0phy1>;
|
|
};
|
|
|
|
switch0port3: port@3 {
|
|
reg = <3>;
|
|
label = "lan2";
|
|
phy-handle = <&switch0phy2>;
|
|
};
|
|
|
|
switch0port4: port@4 {
|
|
reg = <4>;
|
|
label = "lan3";
|
|
phy-handle = <&switch0phy3>;
|
|
};
|
|
|
|
switch0port5: port@5 {
|
|
reg = <5>;
|
|
label = "wan";
|
|
phy-handle = <&extphy>;
|
|
phy-mode = "sgmii";
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
switch0phy3: switch0phy3@14 {
|
|
reg = <0x14>;
|
|
};
|
|
};
|
|
};
|