acrn-kernel/drivers/media/radio/radio-aztech.c

380 lines
8.6 KiB
C

/* radio-aztech.c - Aztech radio card driver for Linux 2.2
*
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
* Adapted to support the Video for Linux API by
* Russell Kroll <rkroll@exploits.org>. Based on original tuner code by:
*
* Quay Ly
* Donald Song
* Jason Lewis (jlewis@twilight.vtc.vsc.edu)
* Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
* William McGrath (wmcgrath@twilight.vtc.vsc.edu)
*
* The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/
* along with more information on the card itself.
*
* History:
* 1999-02-24 Russell Kroll <rkroll@exploits.org>
* Fine tuning/VIDEO_TUNER_LOW
* Range expanded to 87-108 MHz (from 87.9-107.8)
*
* Notable changes from the original source:
* - includes stripped down to the essentials
* - for loops used as delays replaced with udelay()
* - #defines removed, changed to static values
* - tuning structure changed - no more character arrays, other changes
*/
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
#include <linux/delay.h> /* udelay */
#include <asm/io.h> /* outb, outb_p */
#include <asm/uaccess.h> /* copy to/from user */
#include <linux/videodev2.h> /* kernel radio structs */
#include <media/v4l2-common.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#define RADIO_VERSION KERNEL_VERSION(0,0,2)
static struct v4l2_queryctrl radio_qctrl[] = {
{
.id = V4L2_CID_AUDIO_MUTE,
.name = "Mute",
.minimum = 0,
.maximum = 1,
.default_value = 1,
.type = V4L2_CTRL_TYPE_BOOLEAN,
},{
.id = V4L2_CID_AUDIO_VOLUME,
.name = "Volume",
.minimum = 0,
.maximum = 0xff,
.step = 1,
.default_value = 0xff,
.type = V4L2_CTRL_TYPE_INTEGER,
}
};
/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
#ifndef CONFIG_RADIO_AZTECH_PORT
#define CONFIG_RADIO_AZTECH_PORT -1
#endif
static int io = CONFIG_RADIO_AZTECH_PORT;
static int radio_nr = -1;
static int radio_wait_time = 1000;
static struct mutex lock;
struct az_device
{
int curvol;
unsigned long curfreq;
int stereo;
};
static int volconvert(int level)
{
level>>=14; /* Map 16bits down to 2 bit */
level&=3;
/* convert to card-friendly values */
switch (level)
{
case 0:
return 0;
case 1:
return 1;
case 2:
return 4;
case 3:
return 5;
}
return 0; /* Quieten gcc */
}
static void send_0_byte (struct az_device *dev)
{
udelay(radio_wait_time);
outb_p(2+volconvert(dev->curvol), io);
outb_p(64+2+volconvert(dev->curvol), io);
}
static void send_1_byte (struct az_device *dev)
{
udelay (radio_wait_time);
outb_p(128+2+volconvert(dev->curvol), io);
outb_p(128+64+2+volconvert(dev->curvol), io);
}
static int az_setvol(struct az_device *dev, int vol)
{
mutex_lock(&lock);
outb (volconvert(vol), io);
mutex_unlock(&lock);
return 0;
}
/* thanks to Michael Dwyer for giving me a dose of clues in
* the signal strength department..
*
* This card has a stereo bit - bit 0 set = mono, not set = stereo
* It also has a "signal" bit - bit 1 set = bad signal, not set = good
*
*/
static int az_getsigstr(struct az_device *dev)
{
if (inb(io) & 2) /* bit set = no signal present */
return 0;
return 1; /* signal present */
}
static int az_getstereo(struct az_device *dev)
{
if (inb(io) & 1) /* bit set = mono */
return 0;
return 1; /* stereo */
}
static int az_setfreq(struct az_device *dev, unsigned long frequency)
{
int i;
frequency += 171200; /* Add 10.7 MHz IF */
frequency /= 800; /* Convert to 50 kHz units */
mutex_lock(&lock);
send_0_byte (dev); /* 0: LSB of frequency */
for (i = 0; i < 13; i++) /* : frequency bits (1-13) */
if (frequency & (1 << i))
send_1_byte (dev);
else
send_0_byte (dev);
send_0_byte (dev); /* 14: test bit - always 0 */
send_0_byte (dev); /* 15: test bit - always 0 */
send_0_byte (dev); /* 16: band data 0 - always 0 */
if (dev->stereo) /* 17: stereo (1 to enable) */
send_1_byte (dev);
else
send_0_byte (dev);
send_1_byte (dev); /* 18: band data 1 - unknown */
send_0_byte (dev); /* 19: time base - always 0 */
send_0_byte (dev); /* 20: spacing (0 = 25 kHz) */
send_1_byte (dev); /* 21: spacing (1 = 25 kHz) */
send_0_byte (dev); /* 22: spacing (0 = 25 kHz) */
send_1_byte (dev); /* 23: AM/FM (FM = 1, always) */
/* latch frequency */
udelay (radio_wait_time);
outb_p(128+64+volconvert(dev->curvol), io);
mutex_unlock(&lock);
return 0;
}
static int az_do_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *arg)
{
struct video_device *dev = video_devdata(file);
struct az_device *az = dev->priv;
switch(cmd)
{
case VIDIOC_QUERYCAP:
{
struct v4l2_capability *v = arg;
memset(v,0,sizeof(*v));
strlcpy(v->driver, "radio-aztech", sizeof (v->driver));
strlcpy(v->card, "Aztech Radio", sizeof (v->card));
sprintf(v->bus_info,"ISA");
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER;
return 0;
}
case VIDIOC_G_TUNER:
{
struct v4l2_tuner *v = arg;
if (v->index > 0)
return -EINVAL;
memset(v,0,sizeof(*v));
strcpy(v->name, "FM");
v->type = V4L2_TUNER_RADIO;
v->rangelow=(87*16000);
v->rangehigh=(108*16000);
v->rxsubchans =V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
v->capability=V4L2_TUNER_CAP_LOW;
if(az_getstereo(az))
v->audmode = V4L2_TUNER_MODE_STEREO;
else
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal=0xFFFF*az_getsigstr(az);
return 0;
}
case VIDIOC_S_TUNER:
{
struct v4l2_tuner *v = arg;
if (v->index > 0)
return -EINVAL;
return 0;
}
case VIDIOC_S_FREQUENCY:
{
struct v4l2_frequency *f = arg;
az->curfreq = f->frequency;
az_setfreq(az, az->curfreq);
return 0;
}
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *f = arg;
f->type = V4L2_TUNER_RADIO;
f->frequency = az->curfreq;
return 0;
}
case VIDIOC_QUERYCTRL:
{
struct v4l2_queryctrl *qc = arg;
int i;
for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
if (qc->id && qc->id == radio_qctrl[i].id) {
memcpy(qc, &(radio_qctrl[i]),
sizeof(*qc));
return (0);
}
}
return -EINVAL;
}
case VIDIOC_G_CTRL:
{
struct v4l2_control *ctrl= arg;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (az->curvol==0)
ctrl->value=1;
else
ctrl->value=0;
return (0);
case V4L2_CID_AUDIO_VOLUME:
ctrl->value=az->curvol * 6554;
return (0);
}
return -EINVAL;
}
case VIDIOC_S_CTRL:
{
struct v4l2_control *ctrl= arg;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value) {
az_setvol(az,0);
} else {
az_setvol(az,az->curvol);
}
return (0);
case V4L2_CID_AUDIO_VOLUME:
az_setvol(az,ctrl->value);
return (0);
}
return -EINVAL;
}
default:
return v4l_compat_translate_ioctl(inode,file,cmd,arg,
az_do_ioctl);
}
}
static int az_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
return video_usercopy(inode, file, cmd, arg, az_do_ioctl);
}
static struct az_device aztech_unit;
static struct file_operations aztech_fops = {
.owner = THIS_MODULE,
.open = video_exclusive_open,
.release = video_exclusive_release,
.ioctl = az_ioctl,
.compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
static struct video_device aztech_radio=
{
.owner = THIS_MODULE,
.name = "Aztech radio",
.type = VID_TYPE_TUNER,
.hardware = 0,
.fops = &aztech_fops,
};
static int __init aztech_init(void)
{
if(io==-1)
{
printk(KERN_ERR "You must set an I/O address with io=0x???\n");
return -EINVAL;
}
if (!request_region(io, 2, "aztech"))
{
printk(KERN_ERR "aztech: port 0x%x already in use\n", io);
return -EBUSY;
}
mutex_init(&lock);
aztech_radio.priv=&aztech_unit;
if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
{
release_region(io,2);
return -EINVAL;
}
printk(KERN_INFO "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
/* mute card - prevents noisy bootups */
outb (0, io);
return 0;
}
MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
MODULE_DESCRIPTION("A driver for the Aztech radio card.");
MODULE_LICENSE("GPL");
module_param(io, int, 0);
module_param(radio_nr, int, 0);
MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)");
static void __exit aztech_cleanup(void)
{
video_unregister_device(&aztech_radio);
release_region(io,2);
}
module_init(aztech_init);
module_exit(aztech_cleanup);