137 lines
6.0 KiB
Plaintext
137 lines
6.0 KiB
Plaintext
|
|
|
|
modedb default video mode support
|
|
|
|
|
|
Currently all frame buffer device drivers have their own video mode databases,
|
|
which is a mess and a waste of resources. The main idea of modedb is to have
|
|
|
|
- one routine to probe for video modes, which can be used by all frame buffer
|
|
devices
|
|
- one generic video mode database with a fair amount of standard videomodes
|
|
(taken from XFree86)
|
|
- the possibility to supply your own mode database for graphics hardware that
|
|
needs non-standard modes, like amifb and Mac frame buffer drivers (which
|
|
use macmodes.c)
|
|
|
|
When a frame buffer device receives a video= option it doesn't know, it should
|
|
consider that to be a video mode option. If no frame buffer device is specified
|
|
in a video= option, fbmem considers that to be a global video mode option.
|
|
|
|
Valid mode specifiers (mode_option argument):
|
|
|
|
<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m]
|
|
<name>[-<bpp>][@<refresh>]
|
|
|
|
with <xres>, <yres>, <bpp> and <refresh> decimal numbers and <name> a string.
|
|
Things between square brackets are optional.
|
|
|
|
If 'M' is specified in the mode_option argument (after <yres> and before
|
|
<bpp> and <refresh>, if specified) the timings will be calculated using
|
|
VESA(TM) Coordinated Video Timings instead of looking up the mode from a table.
|
|
If 'R' is specified, do a 'reduced blanking' calculation for digital displays.
|
|
If 'i' is specified, calculate for an interlaced mode. And if 'm' is
|
|
specified, add margins to the calculation (1.8% of xres rounded down to 8
|
|
pixels and 1.8% of yres).
|
|
|
|
Sample usage: 1024x768M@60m - CVT timing with margins
|
|
|
|
***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo *****
|
|
|
|
What is the VESA(TM) Coordinated Video Timings (CVT)?
|
|
|
|
From the VESA(TM) Website:
|
|
|
|
"The purpose of CVT is to provide a method for generating a consistent
|
|
and coordinated set of standard formats, display refresh rates, and
|
|
timing specifications for computer display products, both those
|
|
employing CRTs, and those using other display technologies. The
|
|
intention of CVT is to give both source and display manufacturers a
|
|
common set of tools to enable new timings to be developed in a
|
|
consistent manner that ensures greater compatibility."
|
|
|
|
This is the third standard approved by VESA(TM) concerning video timings. The
|
|
first was the Discrete Video Timings (DVT) which is a collection of
|
|
pre-defined modes approved by VESA(TM). The second is the Generalized Timing
|
|
Formula (GTF) which is an algorithm to calculate the timings, given the
|
|
pixelclock, the horizontal sync frequency, or the vertical refresh rate.
|
|
|
|
The GTF is limited by the fact that it is designed mainly for CRT displays.
|
|
It artificially increases the pixelclock because of its high blanking
|
|
requirement. This is inappropriate for digital display interface with its high
|
|
data rate which requires that it conserves the pixelclock as much as possible.
|
|
Also, GTF does not take into account the aspect ratio of the display.
|
|
|
|
The CVT addresses these limitations. If used with CRT's, the formula used
|
|
is a derivation of GTF with a few modifications. If used with digital
|
|
displays, the "reduced blanking" calculation can be used.
|
|
|
|
From the framebuffer subsystem perspective, new formats need not be added
|
|
to the global mode database whenever a new mode is released by display
|
|
manufacturers. Specifying for CVT will work for most, if not all, relatively
|
|
new CRT displays and probably with most flatpanels, if 'reduced blanking'
|
|
calculation is specified. (The CVT compatibility of the display can be
|
|
determined from its EDID. The version 1.3 of the EDID has extra 128-byte
|
|
blocks where additional timing information is placed. As of this time, there
|
|
is no support yet in the layer to parse this additional blocks.)
|
|
|
|
CVT also introduced a new naming convention (should be seen from dmesg output):
|
|
|
|
<pix>M<a>[-R]
|
|
|
|
where: pix = total amount of pixels in MB (xres x yres)
|
|
M = always present
|
|
a = aspect ratio (3 - 4:3; 4 - 5:4; 9 - 15:9, 16:9; A - 16:10)
|
|
-R = reduced blanking
|
|
|
|
example: .48M3-R - 800x600 with reduced blanking
|
|
|
|
Note: VESA(TM) has restrictions on what is a standard CVT timing:
|
|
|
|
- aspect ratio can only be one of the above values
|
|
- acceptable refresh rates are 50, 60, 70 or 85 Hz only
|
|
- if reduced blanking, the refresh rate must be at 60Hz
|
|
|
|
If one of the above are not satisfied, the kernel will print a warning but the
|
|
timings will still be calculated.
|
|
|
|
***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo ***** oOo *****
|
|
|
|
To find a suitable video mode, you just call
|
|
|
|
int __init fb_find_mode(struct fb_var_screeninfo *var,
|
|
struct fb_info *info, const char *mode_option,
|
|
const struct fb_videomode *db, unsigned int dbsize,
|
|
const struct fb_videomode *default_mode,
|
|
unsigned int default_bpp)
|
|
|
|
with db/dbsize your non-standard video mode database, or NULL to use the
|
|
standard video mode database.
|
|
|
|
fb_find_mode() first tries the specified video mode (or any mode that matches,
|
|
e.g. there can be multiple 640x480 modes, each of them is tried). If that
|
|
fails, the default mode is tried. If that fails, it walks over all modes.
|
|
|
|
To specify a video mode at bootup, use the following boot options:
|
|
video=<driver>:<xres>x<yres>[-<bpp>][@refresh]
|
|
|
|
where <driver> is a name from the table below. Valid default modes can be
|
|
found in linux/drivers/video/modedb.c. Check your driver's documentation.
|
|
There may be more modes.
|
|
|
|
Drivers that support modedb boot options
|
|
Boot Name Cards Supported
|
|
|
|
amifb - Amiga chipset frame buffer
|
|
aty128fb - ATI Rage128 / Pro frame buffer
|
|
atyfb - ATI Mach64 frame buffer
|
|
pm2fb - Permedia 2/2V frame buffer
|
|
pm3fb - Permedia 3 frame buffer
|
|
sstfb - Voodoo 1/2 (SST1) chipset frame buffer
|
|
tdfxfb - 3D Fx frame buffer
|
|
tridentfb - Trident (Cyber)blade chipset frame buffer
|
|
vt8623fb - VIA 8623 frame buffer
|
|
|
|
BTW, only a few drivers use this at the moment. Others are to follow
|
|
(feel free to send patches).
|