136 lines
5.2 KiB
Plaintext
136 lines
5.2 KiB
Plaintext
INTRODUCTION
|
|
------------
|
|
|
|
Because not every I2C or SMBus adapter implements everything in the
|
|
I2C specifications, a client can not trust that everything it needs
|
|
is implemented when it is given the option to attach to an adapter:
|
|
the client needs some way to check whether an adapter has the needed
|
|
functionality.
|
|
|
|
|
|
FUNCTIONALITY CONSTANTS
|
|
-----------------------
|
|
|
|
For the most up-to-date list of functionality constants, please check
|
|
<linux/i2c.h>!
|
|
|
|
I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus
|
|
adapters typically can not do these)
|
|
I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions
|
|
I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_REV_DIR_ADDR,
|
|
I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART
|
|
flags (which modify the i2c protocol!)
|
|
I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command
|
|
I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command
|
|
I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command
|
|
I2C_FUNC_SMBUS_READ_BYTE_DATA Handles the SMBus read_byte_data command
|
|
I2C_FUNC_SMBUS_WRITE_BYTE_DATA Handles the SMBus write_byte_data command
|
|
I2C_FUNC_SMBUS_READ_WORD_DATA Handles the SMBus read_word_data command
|
|
I2C_FUNC_SMBUS_WRITE_WORD_DATA Handles the SMBus write_byte_data command
|
|
I2C_FUNC_SMBUS_PROC_CALL Handles the SMBus process_call command
|
|
I2C_FUNC_SMBUS_READ_BLOCK_DATA Handles the SMBus read_block_data command
|
|
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA Handles the SMBus write_block_data command
|
|
I2C_FUNC_SMBUS_READ_I2C_BLOCK Handles the SMBus read_i2c_block_data command
|
|
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK Handles the SMBus write_i2c_block_data command
|
|
|
|
A few combinations of the above flags are also defined for your convenience:
|
|
|
|
I2C_FUNC_SMBUS_BYTE Handles the SMBus read_byte
|
|
and write_byte commands
|
|
I2C_FUNC_SMBUS_BYTE_DATA Handles the SMBus read_byte_data
|
|
and write_byte_data commands
|
|
I2C_FUNC_SMBUS_WORD_DATA Handles the SMBus read_word_data
|
|
and write_word_data commands
|
|
I2C_FUNC_SMBUS_BLOCK_DATA Handles the SMBus read_block_data
|
|
and write_block_data commands
|
|
I2C_FUNC_SMBUS_I2C_BLOCK Handles the SMBus read_i2c_block_data
|
|
and write_i2c_block_data commands
|
|
I2C_FUNC_SMBUS_EMUL Handles all SMBus commands than can be
|
|
emulated by a real I2C adapter (using
|
|
the transparent emulation layer)
|
|
|
|
|
|
ALGORITHM/ADAPTER IMPLEMENTATION
|
|
--------------------------------
|
|
|
|
When you write a new algorithm driver, you will have to implement a
|
|
function callback `functionality', that gets an i2c_adapter structure
|
|
pointer as its only parameter:
|
|
|
|
struct i2c_algorithm {
|
|
/* Many other things of course; check <linux/i2c.h>! */
|
|
u32 (*functionality) (struct i2c_adapter *);
|
|
}
|
|
|
|
A typically implementation is given below, from i2c-algo-bit.c:
|
|
|
|
static u32 bit_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
|
|
I2C_FUNC_PROTOCOL_MANGLING;
|
|
}
|
|
|
|
|
|
|
|
CLIENT CHECKING
|
|
---------------
|
|
|
|
Before a client tries to attach to an adapter, or even do tests to check
|
|
whether one of the devices it supports is present on an adapter, it should
|
|
check whether the needed functionality is present. There are two functions
|
|
defined which should be used instead of calling the functionality hook
|
|
in the algorithm structure directly:
|
|
|
|
/* Return the functionality mask */
|
|
extern u32 i2c_get_functionality (struct i2c_adapter *adap);
|
|
|
|
/* Return 1 if adapter supports everything we need, 0 if not. */
|
|
extern int i2c_check_functionality (struct i2c_adapter *adap, u32 func);
|
|
|
|
This is a typical way to use these functions (from the writing-clients
|
|
document):
|
|
int foo_detect_client(struct i2c_adapter *adapter, int address,
|
|
unsigned short flags, int kind)
|
|
{
|
|
/* Define needed variables */
|
|
|
|
/* As the very first action, we check whether the adapter has the
|
|
needed functionality: we need the SMBus read_word_data,
|
|
write_word_data and write_byte functions in this example. */
|
|
if (!i2c_check_functionality(adapter,I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_WRITE_BYTE))
|
|
goto ERROR0;
|
|
|
|
/* Now we can do the real detection */
|
|
|
|
ERROR0:
|
|
/* Return an error */
|
|
}
|
|
|
|
|
|
|
|
CHECKING THROUGH /DEV
|
|
---------------------
|
|
|
|
If you try to access an adapter from a userspace program, you will have
|
|
to use the /dev interface. You will still have to check whether the
|
|
functionality you need is supported, of course. This is done using
|
|
the I2C_FUNCS ioctl. An example, adapted from the lm_sensors i2c_detect
|
|
program, is below:
|
|
|
|
int file;
|
|
if (file = open("/dev/i2c-0",O_RDWR) < 0) {
|
|
/* Some kind of error handling */
|
|
exit(1);
|
|
}
|
|
if (ioctl(file,I2C_FUNCS,&funcs) < 0) {
|
|
/* Some kind of error handling */
|
|
exit(1);
|
|
}
|
|
if (! (funcs & I2C_FUNC_SMBUS_QUICK)) {
|
|
/* Oops, the needed functionality (SMBus write_quick function) is
|
|
not available! */
|
|
exit(1);
|
|
}
|
|
/* Now it is safe to use the SMBus write_quick command */
|