179 lines
5.7 KiB
YAML
179 lines
5.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Switch-Mode Battery Charger and Boost
|
|
|
|
maintainers:
|
|
- Sebastian Reichel <sre@kernel.org>
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- qcom,pm8226-charger
|
|
- qcom,pm8941-charger
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
items:
|
|
- description: charge done
|
|
- description: charge fast mode
|
|
- description: charge trickle mode
|
|
- description: battery temperature ok
|
|
- description: battery present
|
|
- description: charger disconnected
|
|
- description: USB-in valid
|
|
- description: DC-in valid
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: chg-done
|
|
- const: chg-fast
|
|
- const: chg-trkl
|
|
- const: bat-temp-ok
|
|
- const: bat-present
|
|
- const: chg-gone
|
|
- const: usb-valid
|
|
- const: dc-valid
|
|
|
|
qcom,fast-charge-current-limit:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 100000
|
|
maximum: 3000000
|
|
description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
|
|
|
|
qcom,fast-charge-low-threshold-voltage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 2100000
|
|
maximum: 3600000
|
|
description: |
|
|
Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
|
|
Below this value linear or switch-mode auto-trickle-charging will operate.
|
|
|
|
qcom,fast-charge-high-threshold-voltage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 3240000
|
|
maximum: 5000000
|
|
description: |
|
|
Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
|
|
The fast charger will attempt to charge the battery to this voltage.
|
|
May be clamped to safety limits.
|
|
|
|
qcom,fast-charge-safe-voltage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 3240000
|
|
maximum: 5000000
|
|
description: |
|
|
Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
|
|
setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
|
|
be clamped by this value. Defaults to 4.2V.
|
|
|
|
qcom,fast-charge-safe-current:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 100000
|
|
maximum: 3000000
|
|
description: |
|
|
Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
|
|
setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
|
|
will be clamped by this value. Defaults to 1A.
|
|
|
|
qcom,auto-recharge-threshold-voltage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 3240000
|
|
maximum: 5000000
|
|
description: |
|
|
Battery voltage limit in uV below which auto-recharge functionality will restart charging
|
|
after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
|
|
Defaults to 4.1V.
|
|
|
|
qcom,minimum-input-voltage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 4200000
|
|
maximum: 9600000
|
|
description: |
|
|
Input voltage level in uV above which charging may operate. Defaults to 4.3V.
|
|
|
|
qcom,dc-current-limit:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 100000
|
|
maximum: 2500000
|
|
description: |
|
|
Default DC charge current limit in uA. Defaults to 100mA.
|
|
|
|
qcom,disable-dc:
|
|
type: boolean
|
|
description: Disable DC charger
|
|
|
|
qcom,jeita-extended-temp-range:
|
|
type: boolean
|
|
description: |
|
|
Enable JEITA extended temperature range; This does *not* adjust the maximum charge
|
|
voltage or current in the extended temperature range. It only allows charging when
|
|
the battery is in the extended temperature range. Voltage/current regulation must
|
|
be done externally to fully comply with the JEITA safety guidelines if this flag
|
|
is set.
|
|
|
|
usb-charge-current-limit:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 100000
|
|
maximum: 2500000
|
|
description: |
|
|
Default USB charge current limit in uA.
|
|
|
|
usb-otg-in-supply:
|
|
description: Reference to the regulator supplying power to the USB_OTG_IN pin.
|
|
|
|
otg-vbus:
|
|
$ref: /schemas/regulator/regulator.yaml#
|
|
description: |
|
|
This node defines a regulator used to control the direction of VBUS voltage.
|
|
Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
|
|
or allow input voltage from external VBUS for charging. In the hardware, the supply for
|
|
this regulator comes from usb_otg_in-supply.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-names
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
pmic {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
charger@1000 {
|
|
compatible = "qcom,pm8941-charger";
|
|
reg = <0x1000>;
|
|
interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
|
|
<0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
|
|
interrupt-names = "chg-done",
|
|
"chg-fast",
|
|
"chg-trkl",
|
|
"bat-temp-ok",
|
|
"bat-present",
|
|
"chg-gone",
|
|
"usb-valid",
|
|
"dc-valid";
|
|
qcom,fast-charge-current-limit = <1000000>;
|
|
qcom,dc-current-limit = <1000000>;
|
|
usb-otg-in-supply = <&pm8941_5vs1>;
|
|
|
|
otg-vbus {};
|
|
};
|
|
};
|