50 lines
1.2 KiB
YAML
50 lines
1.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Calxeda Highbank 10Gb XGMAC Ethernet controller
|
|
|
|
description: |
|
|
The Calxeda XGMAC Ethernet controllers are directly connected to the
|
|
internal machine "network fabric", which is set up, initialised and
|
|
managed by the firmware. So there are no PHY properties in this
|
|
binding. Switches in the fabric take care of routing and mapping the
|
|
traffic to external network ports.
|
|
|
|
maintainers:
|
|
- Andre Przywara <andre.przywara@arm.com>
|
|
|
|
properties:
|
|
compatible:
|
|
const: calxeda,hb-xgmac
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
description: |
|
|
Can point to at most 3 xgmac interrupts. The 1st one is the main
|
|
interrupt, the 2nd one is used for power management. The optional
|
|
3rd one is the low power state interrupt.
|
|
minItems: 2
|
|
maxItems: 3
|
|
|
|
dma-coherent: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
ethernet@fff50000 {
|
|
compatible = "calxeda,hb-xgmac";
|
|
reg = <0xfff50000 0x1000>;
|
|
interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
|
|
};
|