Commit Graph

540 Commits

Author SHA1 Message Date
NeilBrown a654b9d8f8 [PATCH] md: allow md intent bitmap to be stored near the superblock.
This provides an alternate to storing the bitmap in a separate file.  The
bitmap can be stored at a given offset from the superblock.  Obviously the
creator of the array must make sure this doesn't intersect with data....
After is good for version-0.90 superblocks.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:47 -07:00
NeilBrown 3d310eb7b3 [PATCH] md: fix deadlock due to md thread processing delayed requests.
Before completing a 'write' the md superblock might need to be updated.
This is best done by the md_thread.

The current code schedules this up and queues the write request for later
handling by the md_thread.

However some personalities (Raid5/raid6) will deadlock if the md_thread
tries to submit requests to its own array.

So this patch changes things so the processes submitting the request waits
for the superblock to be written and then submits the request itself.

This fixes a recently-created deadlock in raid5/raid6

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:46 -07:00
NeilBrown 41158c7eb2 [PATCH] md: optimise reconstruction when re-adding a recently failed drive.
When an array is degraded, bit in the intent-bitmap are never cleared.  So if
a recently failed drive is re-added, we only need to reconstruct the block
that are still reflected in the bitmap.

This patch adds support for this re-adding.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:46 -07:00
NeilBrown 289e99e8ed [PATCH] md: initialise sync_blocks in raid1 resync
Otherwise it could have a random value and might BUG.  This fixes a BUG
during resync problem in raid1 introduced by the bitmap-based-intent-loggin
patches.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:46 -07:00
NeilBrown ab7a30c705 [PATCH] md: fix bug when raid1 attempts a partial reconstruct.
The logic here is wrong.  if fullsync is 0, it WILL BUG.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:46 -07:00
NeilBrown 191ea9b2c7 [PATCH] md: raid1 support for bitmap intent logging
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:46 -07:00
NeilBrown aa3163f816 [PATCH] md: don't skip bitmap pages due to lack of bit that we just cleared.
When looking for pages that need cleaning we skip pages that don't have
BITMAP_PAGE_CLEAN set.  But if it is the 'current' page we will have cleared
that bit ourselves, so skipping it is wrong.  So: move the 'skip this page'
inside 'if page != lastpage'.

Also fold call of file_page_offset into the one place where the value (bit) is
used.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:45 -07:00
NeilBrown 77ad4bc706 [PATCH] md: enable the bitmap write-back daemon and wait for it.
Currently we don't wait for updates to the bitmap to be flushed to disk
properly.  The infrastructure all there, but it isn't being used....

A separate kernel thread (bitmap_writeback_daemon) is needed to wait for each
page as we cannot get callbacks when a page write completes.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:45 -07:00
NeilBrown bfb39fba4e [PATCH] md: check return value of write_page, rather than ignore it
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:45 -07:00
NeilBrown a2cff26ad1 [PATCH] md: improve debug-printing of bitmap superblock.
- report sync_size properly  - need /2 to convert sectors to KB
- move everything over 2 spaces to allow proper spelling of
  "events cleared".

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:45 -07:00
akpm@osdl.org fc7ca163a4 [PATCH] md printk fix
A u64 is not an unsigned long long.  On power4 it is `long', and printk warns.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:45 -07:00
NeilBrown cdbb4cc2e5 [PATCH] md: make sure md bitmap is cleared on a clean start.
As the array-wide clean bit (in the superblock) is set more agressively than
the bits in the bitmap are cleared, it is possible to have an array which is
clean despite there being bits set in the bitmap.

These bits will currently never get cleared, as they can only be cleared by a
resync pass, which never happens.

No, when reading bits from disk, be aware of whether the whole array is known
to be in sync, and act accordingly.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:44 -07:00
NeilBrown bc7f77de2c [PATCH] md: minor code rearrangement in bitmap_init_from_disk
Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:44 -07:00
NeilBrown d80a138c01 [PATCH] md: print correct pid for newly created bitmap-writeback-daemon.
The debugging message printed the wrong pid, which didn't help remove bugs....

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:44 -07:00
NeilBrown 5f40402d96 [PATCH] md: call bitmap_daemon_work regularly
bitmap_daemon_work clears bits in the bitmap for blocks that haven't been
written to for a while.  It needs to be called regularly to make sure the
bitmap doesn't endup full of ones ....  but it wasn't.

So call it from the increasingly-inaptly-named md_check_recovery

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:44 -07:00
NeilBrown 78d742d876 [PATCH] md: a couple of tidyups relating to the bitmap file.
1/ When init from disk, it is a BUG if there is nowhere
   to init from,
2/ use seq_path to print path in /proc/mdstat

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:43 -07:00
NeilBrown 32a7627cf3 [PATCH] md: optimised resync using Bitmap based intent logging
With this patch, the intent to write to some block in the array can be logged
to a bitmap file.  Each bit represents some number of sectors and is set
before any update happens, and only cleared when all writes relating to all
sectors are complete.

After an unclean shutdown, information in this bitmap can be used to optimise
resync - only sectors which could be out-of-sync need to be updated.

Also if a drive is removed and then added back into an array, the recovery can
make use of the bitmap to optimise reconstruction.  This is not implemented in
this patch.

Currently the bitmap is stored in a file which must (obviously) be stored on a
separate device.

The patch only provided infrastructure.  It does not update any personalities
to bitmap intent logging.

Md arrays can still be used with no bitmap file.  This patch has minimal
impact on such arrays.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:43 -07:00
NeilBrown 57afd89f98 [PATCH] md: improve the interface to sync_request
1/ change the return value (which is number-of-sectors synced)
 from 'int' to 'sector_t'.
 The number of sectors is usually easily small enough to fit
 in an int, but if resync needs to abort, it may want to return
 the total number of remaining sectors, which could be large.
 Also errors cannot be returned as negative numbers now, so use
 0 instead
2/ Add a 'skipped' return parameter to allow the array to report
 that it skipped the sectors.  This allows md to take this into account
 in the speed calculations.
 Currently there is no important skipping, but the bitmap-based-resync
 that is coming will use this.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:43 -07:00
NeilBrown 06d91a5fe0 [PATCH] md: improve locking on 'safemode' and move superblock writes
When md marks the superblock dirty before a write, it calls
generic_make_request (to write the superblock) from within
generic_make_request (to write the first dirty block), which could cause
problems later.

With this patch, the superblock write is always done by the helper thread, and
write request are delayed until that write completes.

Also, the locking around marking the array dirty and writing the superblock is
improved to avoid possible races.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:43 -07:00
NeilBrown fca4d848f0 [PATCH] md: merge md_enter_safemode into md_check_recovery
md_enter_safemode checks if it is time to mark the md superblock as 'clean'.
i.e.  if all writes have completed and a suitable delay has passed.

This is currently called from md_handle_safemode which in-turn is called
(almost) every time md_check_recovery is called, and from the end of
md_do_sync which causes the mddev->thread to run, which will always call
md_check_recovery as well.

So it doesn't need to be a separate function and fits quite well into
md_check_recovery.

The "almost" is because multipathd calls md_check_recovery but not
md_handle_safemode.  This is OK because the code from md_enter_safemode is a
no-op if mddev->safemode == 0, which it always is for a multipathd (providing
we don't allow it to be set to 2 on a signal...)

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:42 -07:00
NeilBrown c361777fb9 [PATCH] md: make sure recovery happens when add_new_disk is used for hot_add
Currently if add_new_disk is used to hot-add a drive to a degraded array,
recovery doesn't start ...  because we didn't tell it to.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:42 -07:00
NeilBrown 6ea9c07c6c [PATCH] md: cause md/raid1 to "repack" working devices when number of drives is changed
i.e.  missing or failed drives are moved to the end of the list.  The means
a 3 drive md array with the first drive missing can be shrunk to a two
drive array.  Currently that isn't possible.

Also, the "last_used" device number might be out-of-range after the number
of devices is reduced, so we set it to 0.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:42 -07:00
Lars Marowsky-Bree 4f58802fae [PATCH] dm: Handle READA requests in dm-mpath.c
READA errors failing with EWOULDBLOCK/EAGAIN do not constitute a valid
reason for failing the path; this lead to erratic errors on DM multipath
devices.  This error can be safely propagated upwards without failing the
path.

Acked-by: Kevin Corry <kevcorry@us.ibm.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Lars Marowsky-Bree <lmb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-08 16:21:14 -07:00
NeilBrown 7a5febe9ff [PATCH] md: set the unplug_fn and issue_flush_fn for md devices *after* committed to creation
We we set the too early, they may still be in place and possibly get called
even though the array didn't get set up properly.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:12 -07:00
NeilBrown 29ac8e056f [PATCH] md: fix splitting of md/linear request that cross a device boundary
When a request crosses a boundary between devices, it needs to be split.
But where we should calculate the amount of the request before the boundary
to find the split-point, we care currently calculating the amount that is
*after* the boundary !!!

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:11 -07:00
Adrian Bunk 75c96f8584 [PATCH] make some things static
This patch makes some needlessly global identifiers static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Arjan van de Ven <arjanv@infradead.org>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:47 -07:00
Alasdair G Kergon 5e198d94dd [PATCH] device-mapper: Some missing statics
This patch makes some needlessly global code static.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:46 -07:00
Alasdair G Kergon f1daa40b63 [PATCH] device-mapper dm-emc: Fix a memset
The dm emc hardware handler code memset the hardware handler structure to zero
AFTER it had initialized the structure's spinlock field.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Dave Olien <dmo@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:46 -07:00
Alasdair G Kergon c557308e1f [PATCH] device-mapper multipath: Use private workqueue
dm-mpath.c needs to use a private workqueue (like other dm targets already do)
to avoid interfering with users of the default workqueue.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Lars Marowsky-Bree <lmb@suse.de>
Signed-off-by: <mikenc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:46 -07:00
Alasdair G Kergon b84b0287a8 [PATCH] device-mapper: tidy dm_suspend
Tidy dm_suspend.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:46 -07:00
Alasdair G Kergon 354e007121 [PATCH] device-mapper: handle __lock_fs error
Handle error from __lock_fs()

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:45 -07:00
Alasdair G Kergon dfbe03f6d0 [PATCH] device-mapper: let freeze_bdev return error
Allow freeze_bdev() to return an error.

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:45 -07:00
Alasdair G Kergon 3dcee8064b [PATCH] device-mapper: __unlock_fs void
Make __unlock_fs() void.

From: Christoph Hellwig <hch@lst.de>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:45 -07:00
Alasdair G Kergon d1782a3b0a [PATCH] device-mapper: store bdev while frozen
Store the struct block_device while device is frozen, saving us one call to
bdget_disk().

Signed-Off-By: Alasdair G Kergon <agk@redhat.com>
From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05 16:36:45 -07:00
Paul E. McKenney fbd568a3e6 [PATCH] Change synchronize_kernel to _rcu and _sched
This patch changes calls to synchronize_kernel(), deprecated in the earlier
"Deprecate synchronize_kernel, GPL replacement" patch to instead call the new
synchronize_rcu() and synchronize_sched() APIs.

Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:04 -07:00
Nick Piggin bd53b714d3 [PATCH] mm: use __GFP_NOMEMALLOC
Use the new __GFP_NOMEMALLOC to simplify the previous handling of
PF_MEMALLOC.

Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:58:37 -07:00
NeilBrown a757e64cfa [PATCH] md: remove a number of misleading calls to MD_BUG
The conditions that cause these calls to MD_BUG are not kernel bugs, just
oddities in what userspace is asking for.

Also convert analyze_sbs to return void, and the value it returned was
always 0.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:42 -07:00
NeilBrown d28446fe2d [PATCH] md: close a small race in md thread deregistration
There is a tiny race when de-registering an MD thread, in that the thread
could disappear before it is set a SIGKILL, causing send_sig to have
problems.  

This is most easily closed by holding tasklist_lock between enabling the
thread to exit (setting ->run to NULL) and telling it to exit.

(akpm: ick.  Needs to use kthread API and stop using signals)

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:41 -07:00
Neil Brown baaa2c512d [PATCH] Avoid deadlock in sync_page_io by using GFP_NOIO
..as sync_page_io can be called on the write-out path.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:23:54 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00