Commit Graph

20 Commits

Author SHA1 Message Date
Gerrit Renker ba4e58eca8 [NET]: Supporting UDP-Lite (RFC 3828) in Linux
This is a revision of the previously submitted patch, which alters
the way files are organized and compiled in the following manner:

	* UDP and UDP-Lite now use separate object files
	* source file dependencies resolved via header files
	  net/ipv{4,6}/udp_impl.h
	* order of inclusion files in udp.c/udplite.c adapted
	  accordingly

[NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828)

This patch adds support for UDP-Lite to the IPv4 stack, provided as an
extension to the existing UDPv4 code:
        * generic routines are all located in net/ipv4/udp.c
        * UDP-Lite specific routines are in net/ipv4/udplite.c
        * MIB/statistics support in /proc/net/snmp and /proc/net/udplite
        * shared API with extensions for partial checksum coverage

[NET/IPv6]: Extension for UDP-Lite over IPv6

It extends the existing UDPv6 code base with support for UDP-Lite
in the same manner as per UDPv4. In particular,
        * UDPv6 generic and shared code is in net/ipv6/udp.c
        * UDP-Litev6 specific extensions are in net/ipv6/udplite.c
        * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6
        * support for IPV6_ADDRFORM
        * aligned the coding style of protocol initialisation with af_inet6.c
        * made the error handling in udpv6_queue_rcv_skb consistent;
          to return `-1' on error on all error cases
        * consolidation of shared code

[NET]: UDP-Lite Documentation and basic XFRM/Netfilter support

The UDP-Lite patch further provides
        * API documentation for UDP-Lite
        * basic xfrm support
        * basic netfilter support for IPv4 and IPv6 (LOG target)

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:22:46 -08:00
Al Viro 8c689a6eae [XFRM]: misc annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02 21:21:11 -08:00
Ville Nuorvala 4251320fa2 [IPV6]: Make sure error handling is done when calling ip6_route_output().
As ip6_route_output() never returns NULL, error checking must be done by
looking at dst->error in stead of comparing dst against NULL.

Signed-off-by: Ville Nuorvala <vnuorval@tcs.hut.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-18 19:55:27 -07:00
Venkat Yekkirala 5b368e61c2 IPsec: correct semantics for SELinux policy matching
Currently when an IPSec policy rule doesn't specify a security
context, it is assumed to be "unlabeled" by SELinux, and so
the IPSec policy rule fails to match to a flow that it would
otherwise match to, unless one has explicitly added an SELinux
policy rule allowing the flow to "polmatch" to the "unlabeled"
IPSec policy rules. In the absence of such an explicitly added
SELinux policy rule, the IPSec policy rule fails to match and
so the packet(s) flow in clear text without the otherwise applicable
xfrm(s) applied.

The above SELinux behavior violates the SELinux security notion of
"deny by default" which should actually translate to "encrypt by
default" in the above case.

This was first reported by Evgeniy Polyakov and the way James Morris
was seeing the problem was when connecting via IPsec to a
confined service on an SELinux box (vsftpd), which did not have the
appropriate SELinux policy permissions to send packets via IPsec.

With this patch applied, SELinux "polmatching" of flows Vs. IPSec
policy rules will only come into play when there's a explicit context
specified for the IPSec policy rule (which also means there's corresponding
SELinux policy allowing appropriate domains/flows to polmatch to this context).

Secondly, when a security module is loaded (in this case, SELinux), the
security_xfrm_policy_lookup() hook can return errors other than access denied,
such as -EINVAL.  We were not handling that correctly, and in fact
inverting the return logic and propagating a false "ok" back up to
xfrm_lookup(), which then allowed packets to pass as if they were not
associated with an xfrm policy.

The solution for this is to first ensure that errno values are
correctly propagated all the way back up through the various call chains
from security_xfrm_policy_lookup(), and handled correctly.

Then, flow_cache_lookup() is modified, so that if the policy resolver
fails (typically a permission denied via the security module), the flow
cache entry is killed rather than having a null policy assigned (which
indicates that the packet can pass freely).  This also forces any future
lookups for the same flow to consult the security module (e.g. SELinux)
for current security policy (rather than, say, caching the error on the
flow cache entry).

This patch: Fix the selinux side of things.

This makes sure SELinux polmatching of flow contexts to IPSec policy
rules comes into play only when an explicit context is associated
with the IPSec policy rule.

Also, this no longer defaults the context of a socket policy to
the context of the socket since the "no explicit context" case
is now handled properly.

Signed-off-by: Venkat Yekkirala <vyekkirala@TrustedCS.com>
Signed-off-by: James Morris <jmorris@namei.org>
2006-10-11 23:59:37 -07:00
Patrick McHardy a1e59abf82 [XFRM]: Fix wildcard as tunnel source
Hashing SAs by source address breaks templates with wildcards as tunnel
source since the source address used for hashing/lookup is still 0/0.
Move source address lookup to xfrm_tmpl_resolve_one() so we can use the
real address in the lookup.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:19:06 -07:00
David S. Miller 9d4a706d85 [XFRM]: Add generation count to xfrm_state and xfrm_dst.
Each xfrm_state inserted gets a new generation counter
value.  When a bundle is created, the xfrm_dst objects
get the current generation counter of the xfrm_state
they will attach to at dst->xfrm.

xfrm_bundle_ok() will return false if it sees an
xfrm_dst with a generation count different from the
generation count of the xfrm_state that dst points to.

This provides a facility by which to passively and
cheaply invalidate cached IPSEC routes during SA
database changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:08:42 -07:00
Masahide NAKAMURA 2ce4272a69 [IPV6] MIP6: Transformation support mobility header.
Transformation support mobility header.
Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:07:03 -07:00
Masahide NAKAMURA e53820de0f [XFRM] IPV6: Restrict bundle reusing
For outbound transformation, bundle is checked whether it is
suitable for current flow to be reused or not. In such IPv6 case
as below, transformation may apply incorrect bundle for the flow instead
of creating another bundle:

- The policy selector has destination prefix length < 128
  (Two or more addresses can be matched it)
- Its bundle holds dst entry of default route whose prefix length < 128
  (Previous traffic was used such route as next hop)
- The policy and the bundle were used a transport mode state and
  this time flow address is not matched the bundled state.

This issue is found by Mobile IPv6 usage to protect mobility signaling
by IPsec, but it is not a Mobile IPv6 specific.
This patch adds strict check to xfrm_bundle_ok() for each
state mode and address when prefix length is less than 128.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:44 -07:00
Masahide NAKAMURA 1b5c229987 [XFRM] STATE: Support non-fragment outbound transformation headers.
For originated outbound IPv6 packets which will fragment, ip6_append_data()
should know length of extension headers before sending them and
the length is carried by dst_entry.
IPv6 IPsec headers fragment then transformation was
designed to place all headers after fragment header.
OTOH Mobile IPv6 extension headers do not fragment then
it is a good idea to make dst_entry have non-fragment length to tell it
to ip6_append_data().

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:41 -07:00
Masahide NAKAMURA 99505a8436 [XFRM] STATE: Add a hook to obtain local/remote outbound address.
Outbound transformation replaces both source and destination address with
state's end-point addresses at the same time when IPsec tunnel mode.
It is also required to change them for Mobile IPv6 route optimization, but we
should care about the following differences:
 - changing result is not end-point but care-of address
 - either source or destination is replaced for each state
This hook is a common platform to change outbound address.
Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:06:41 -07:00
Masahide NAKAMURA 7e49e6de30 [XFRM]: Add XFRM_MODE_xxx for future use.
Transformation mode is used as either IPsec transport or tunnel.
It is required to add two more items, route optimization and inbound trigger
for Mobile IPv6.
Based on MIPL2 kernel patch.

This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi>

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:05:15 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Herbert Xu 546be2405b [IPSEC] xfrm: Undo afinfo lock proliferation
The number of locks used to manage afinfo structures can easily be reduced
down to one each for policy and state respectively.  This is based on the
observation that the write locks are only held by module insertion/removal
which are very rare events so there is no need to further differentiate
between the insertion of modules like ipv6 versus esp6.

The removal of the read locks in xfrm4_policy.c/xfrm6_policy.c might look
suspicious at first.  However, after you realise that nobody ever takes
the corresponding write lock you'll feel better :)

As far as I can gather it's an attempt to guard against the removal of
the corresponding modules.  Since neither module can be unloaded at all
we can leave it to whoever fixes up IPv6 unloading :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:28:37 -07:00
YOSHIFUJI Hideaki e5d25a9088 [IPV6] XFRM: Fix decoding session with preceding extension header(s).
We did not correctly decode session with preceding extension
header(s).  This was because we had already pulled preceding
headers, skb->nh.raw + 40 + 1 - skb->data was minus, and
pskb_may_pull() failed.

We now have IP6CB(skb)->nhoff and skb->h.raw, and we can
start parsing / decoding upper layer protocol from current
position.

Tracked down by Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>
and tested by Kazunori Miyazawa <kazunori@miyazawa.org>.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-18 15:57:52 -07:00
YOSHIFUJI Hideaki e3cae904d7 [IPV6] XFRM: Don't use old copy of pointer after pskb_may_pull().
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-18 15:57:51 -07:00
Al Viro 1b8623545b [PATCH] remove bogus asm/bug.h includes.
A bunch of asm/bug.h includes are both not needed (since it will get
pulled anyway) and bogus (since they are done too early).  Removed.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07 20:56:35 -05:00
Patrick McHardy 9e999993c7 [XFRM]: Handle DCCP in xfrm{4,6}_decode_session
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 14:03:46 -08:00
Hideaki YOSHIFUJI 92d63decc0 From: Kazunori Miyazawa <kazunori@miyazawa.org>
[XFRM] Call dst_check() with appropriate cookie

This fixes infinite loop issue with IPv6 tunnel mode.

Signed-off-by: Kazunori Miyazawa <kazunori@miyazawa.org>
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-26 12:58:04 -07:00
Herbert Xu aabc9761b6 [IPSEC]: Store idev entries
I found a bug that stopped IPsec/IPv6 from working.  About
a month ago IPv6 started using rt6i_idev->dev on the cached socket dst
entries.  If the cached socket dst entry is IPsec, then rt6i_idev will
be NULL.

Since we want to look at the rt6i_idev of the original route in this
case, the easiest fix is to store rt6i_idev in the IPsec dst entry just
as we do for a number of other IPv6 route attributes.  Unfortunately
this means that we need some new code to handle the references to
rt6i_idev.  That's why this patch is bigger than it would otherwise be.

I've also done the same thing for IPv4 since it is conceivable that
once these idev attributes start getting used for accounting, we
probably need to dereference them for IPv4 IPsec entries too.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-03 16:27:10 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00