When the dt3155 driver is built-in (not as a loadable module),
these build errors happen:
drivers/staging/dt3155/dt3155_drv.c:1047: error: implicit declaration of function 'request_irq'
drivers/staging/dt3155/dt3155_drv.c:1048: error: 'IRQF_SHARED' undeclared (first use in this function)
drivers/staging/dt3155/dt3155_drv.c:1048: error: 'IRQF_DISABLED' undeclared (first use in this function)
drivers/staging/dt3155/dt3155_drv.c:1091: error: implicit declaration of function 'free_irq'
so remove the #ifdef MODULE check since it's not needed. Also remove
the CONFIG_PCI check since the Kconfig file already requires that.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Scott Smedley <ss@aao.gov.au>
Tested-by: Jan III Sobieski <jan3sobi3ski@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
FC disable is bit 3 of the txmac ctl register, but commit 6720949d55
("Staging: et131x: Kil the txmac type") accidentally changed the code to
set bit 2 instead.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Values such as max_brightness should be set before backlights are
registered, but the current API doesn't allow that. Add a parameter to
backlight_device_register and update drivers to ensure that they
set this correctly.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Convert some drivers who export a single string as class attribute
to the new class_attr_string functions. This removes redundant
code all over.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Passing the attribute to the low level IO functions allows all kinds
of cleanups, by sharing low level IO code without requiring
an own function for every piece of data.
Also drivers can extend the attributes with own data fields
and use that in the low level function.
This makes the class attributes the same as sysdev_class attributes
and plain attributes.
This will allow further cleanups in drivers.
Full tree sweep converting all users.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits)
quota: stop using QUOTA_OK / NO_QUOTA
dquot: cleanup dquot initialize routine
dquot: move dquot initialization responsibility into the filesystem
dquot: cleanup dquot drop routine
dquot: move dquot drop responsibility into the filesystem
dquot: cleanup dquot transfer routine
dquot: move dquot transfer responsibility into the filesystem
dquot: cleanup inode allocation / freeing routines
dquot: cleanup space allocation / freeing routines
ext3: add writepage sanity checks
ext3: Truncate allocated blocks if direct IO write fails to update i_size
quota: Properly invalidate caches even for filesystems with blocksize < pagesize
quota: generalize quota transfer interface
quota: sb_quota state flags cleanup
jbd: Delay discarding buffers in journal_unmap_buffer
ext3: quota_write cross block boundary behaviour
quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota
quota: split out compat_sys_quotactl support from quota.c
quota: split out netlink notification support from quota.c
quota: remove invalid optimization from quota_sync_all
...
Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
Get rid of the transfer dquot operation - it is now always called from
the filesystem and if a filesystem really needs it's own (which none
currently does) it can just call into it's own routine directly.
Rename the now static low-level dquot_transfer helper to __dquot_transfer
and vfs_dq_transfer to dquot_transfer to have a consistent namespace,
and make the new dquot_transfer return a normal negative errno value
which all callers expect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The wireless core made a number of api changes that caused
the winbond driver to break. This patch fixes those errors by
making the needed changes to the driver.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There were a number of patches that went into Linus's
tree already that conflicted with other changes in the
staging branch. This merge resolves those merge conflicts.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turns out that multiple people sent pretty much the same patch
for the same staging drivers. Commit these in two different
branches and merge them together to get a more complete coverage
of the cleanup and properly credit everyone for the work that they
did.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some code style issues about assignments in if conditions.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some code style issues like to add one space after a while or
switch statement and before a open parenthesis '(', and to include KERN_
facility level in the printk() functions.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise externals to 0 or NULL
+int comedi_num_legacy_minors = 0;
WARNING: braces {} are not necessary for single statement blocks
+ if (s->subdev_flags & SDF_CMD_READ) {
+ kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (s->subdev_flags & SDF_CMD_WRITE) {
+ kill_fasync(&dev->async_queue, SIGIO, POLL_OUT);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes suspect code indent for
conditional statements found by the checkpatch.pl tool
Signed-off-by: Stewart Robertson <stewart_r@aliencamel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up all the brace
warnings found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up a brace warning
found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_labpc.c file that fixes up a brace warning
found by the checkpatch.pl tool.
Signed-off-by: Maurice Dawson <maurice2699@btinternet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some coding style issues like include KERN_ facility levels
in some printk() and one trailing whitespace error.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some code style issues like else staments after the close
braces '}' and to use __func__ instead of __FUNCTION__.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes all the errors and the majority of the warnings found with
checkpatch.pl script in hfa384x.h, following Gábor Stefanik hints
Signed-off-by: Alessandro Ghedini <al3xbio@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some coding style issues like to use __func__ instead
__FUNCTION__, "foo *bar" instead "foo* bar" and a initial comment with
"/* */" instead "//"
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_660x.c file that fixes up the brace and 80
character issues found by the checkpatch tool
Signed-off-by: Graham M Howe <gmhowe@btopenworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ni_65xx.c file that fixes up a brace
warning found by the checkpatch.pl tool
Signed-off-by: Graham M Howe <gmhowe@btopenworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes all checkpatch issues in the pcmad comedi driver.
Signed-off-by: Benjamin Adolphi <b.adolphi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes a line over 80 characters and a brace warnings.
Signed-off-by: Chihau Chau <chihau@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 9c1390a923ddb6fba1cf9d7440743369140c6d8a replaced
all u_int's with u32 and u_long's with u64. Unfortunately, a u_long
is still only 32-bits so they should have been replaced with u32 also.
This can be verified by the register definitions in dt3155_io.h. It
specifically states that the memory mapped registers are 32-bit.
Fix this by changing all the u64 to u32.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
+#include <asm/io.h>
WARNING: braces {} are not necessary for any arm of this statement
+ if (dev->driver) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (insn->insn == INSN_READ) {
+ data[0] = (new_data[1] >> (chan - base_bitfield_channel)) & 1;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->prealloc_buf && async->prealloc_bufsz == new_size) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->buf_page_list[i].virt_addr == NULL) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) {
+ nbytes = free_end - async->buf_write_alloc_count;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((int)(async->buf_write_alloc_count + nbytes - free_end) > 0) {
+ nbytes = 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->buf_write_ptr >= async->prealloc_bufsz) {
+ async->buf_write_ptr %= async->prealloc_bufsz;
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not use C99 // comments
+ volatile u_char radioModule;// shows EEPROM, can be overridden at 0x111
ERROR: do not use C99 // comments
+ volatile u_char defaultChannelSet; // shows EEProm, can be overriiden at 0x10A
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Init (MD4_CTX *);
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Update (MD4_CTX *, u8 *, UINT);
WARNING: space prohibited between function name and open parenthesis '('
+void MD4Final (u8 [16], MD4_CTX *);
ERROR: do not use C99 // comments
+#endif //__MD4_H__
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: trailing whitespace
+ * Copyright (C) 1998 Elmer.Joandi@ut.ee, +37-255-13500^I$
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
+#include <asm/io.h>
ERROR: do not use C99 // comments
+//#define ARLAN_DEBUGGING 1
ERROR: "foo * bar" should be "foo *bar"
+extern int arlan_command(struct net_device * dev, int command);
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+#define IFDEBUG( L ) if ( (L) & arlan_debug ) $
ERROR: space prohibited after that open parenthesis '('
+#define IFDEBUG( L ) if ( (L) & arlan_debug )
ERROR: space prohibited before that close parenthesis ')'
+#define IFDEBUG( L ) if ( (L) & arlan_debug )
ERROR: trailing whitespace
+#define ARLAN_FAKE_HDR_LEN 12 $
ERROR: space required after that ',' (ctx:VxV)
+ #define ARLAN_DEBUG(a,b) printk(KERN_DEBUG a, b)
^
ERROR: trailing whitespace
+^I#define ARLAN_DEBUG(a,b) $
ERROR: space required after that ',' (ctx:VxV)
+ #define ARLAN_DEBUG(a,b)
^
ERROR: open brace '{' following struct go on the same line
+struct arlan_shmem
+{
ERROR: trailing whitespace
+ /* Header Signature */ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ int systemId; $
ERROR: open brace '{' following struct go on the same line
+struct TxParam
+{
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_shmem __iomem * card;
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_shmem * conf;
ERROR: trailing whitespace
+ struct arlan_conf_stru * Conf;^I $
ERROR: "foo * bar" should be "foo *bar"
+ struct arlan_conf_stru * Conf;
ERROR: trailing whitespace
+ $
ERROR: space required after that ',' (ctx:VxV)
+#define READSHM(to,from,atype) {\
^
ERROR: space required after that ',' (ctx:VxV)
+#define READSHM(to,from,atype) {\
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+#define READSHMEM(from,atype)\
^
ERROR: space required after that ',' (ctx:VxV)
+#define WRITESHM(to,from,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define WRITESHM(to,from,atype) \
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxV)
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
^
ERROR: space required after that ',' (ctx:VxO)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required before that '&' (ctx:OxV)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
^
ERROR: space required after that ',' (ctx:VxV)
+ IFDEBUG(levelSHM) printk(stringSHM,tmpSHM);\
^
ERROR: space required after that ',' (ctx:VxO)
+ writeb(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writeb(val,&(to))
^
ERROR: space required after that ',' (ctx:VxO)
+ writew(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writew(val,&(to))
^
ERROR: space required after that ',' (ctx:VxO)
+ writel(val,&(to))
^
ERROR: space required before that '&' (ctx:OxV)
+ writel(val,&(to))
^
ERROR: space prohibited after that open parenthesis '('
+ ( ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationMode) > 0) && \
ERROR: space prohibited after that open parenthesis '('
+ ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) )
ERROR: space prohibited before that close parenthesis ')'
+ ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) )
ERROR: code indent should use tabs where possible
+ ^IREADSHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage)$
ERROR: space required before the open brace '{'
+#define writeControlRegister(dev, v){\
ERROR: space required after that ',' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
^
ERROR: need consistent spacing around '&' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
^
ERROR: space prohibited before that close parenthesis ')'
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
ERROR: space required after that ',' (ctx:WxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
^
ERROR: space required after that ';' (ctx:VxV)
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
^
ERROR: space prohibited before that close parenthesis ')'
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
WARNING: suspect code indent for conditional statements (3, 6)
+ if (cr & ARLAN_CHANNEL_ATTENTION){ \
+ writeControlRegister(dev, (cr & ~ARLAN_CHANNEL_ATTENTION));\
ERROR: space required before the open brace '{'
+ if (cr & ARLAN_CHANNEL_ATTENTION){ \
ERROR: space required after that close brace '}'
+ }else \
ERROR: space required before the open brace '{'
+#define clearChannelAttention(dev){ \
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);}
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);}
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);}
^
ERROR: space required before the open brace '{'
+#define setInterruptEnable(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required before the open brace '{'
+#define clearInterruptEnable(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;}
^
ERROR: space required before the open brace '{'
+#define setClearInterrupt(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;}
^
ERROR: space required after that ';' (ctx:WxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;}
^
ERROR: space required before the open brace '{'
+#define clearClearInterrupt(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
^
ERROR: space required before the open brace '{'
+#define setPowerOff(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER && ARLAN_ACCESS));\
^
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required before the open brace '{'
+#define setPowerOn(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~(ARLAN_POWER)); }
^
ERROR: space required before the open brace '{'
+#define arlan_lock_card_access(dev){\
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required after that ';' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
^
ERROR: space required before the open brace '{'
+#define arlan_unlock_card_access(dev){\
ERROR: trailing whitespace
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); } $
ERROR: space required after that ',' (ctx:VxV)
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); }
^
ERROR: space prohibited before that close parenthesis ')'
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); }
ERROR: trailing whitespace
+ $
ERROR: trailing whitespace
+ $
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ 0 = [-10,10]$
ERROR: code indent should use tabs where possible
+ 0 = [-10,10]$
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & (DT_S_COMPOSITE_ERROR | DT_S_READY)) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_COMPOSITE_ERROR) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_READY) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_COMPOSITE_ERROR) {
+ return stat;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (stat & DT_S_READY) {
+ return 0;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!(stat & DT_S_READY)) {
+ printk("dt2801: !ready in dt2801_writecmd(), ignoring\n");
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!timeout) {
+ printk("dt2801: timeout 1 status=0x%02x\n", stat);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (!timeout) {
+ printk("dt2801: timeout 2 status=0x%02x\n", stat);
+ }
WARNING: braces {} are not necessary for any arm of this statement
+ if (stat == -ETIME) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[0] == COMEDI_OUTPUT) {
[...]
+ } else {
[...]
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (fifo_empty) {
+ break;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (irq) {
+ printk(", irq %u", irq);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: Macros with complex values should be enclosed in parenthesis
+#define N_WORDS 3000*64
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise statics to 0 or NULL
+static unsigned int ui_Temp = 0;
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[1]) {
[...]
+ } else
[...]
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < devpriv->ui_AiNbrofChannels; i++) {
+ devpriv->ui_AiChannelList[i] = data[4 + i];
+ }
ERROR: that open brace { should be on the previous line
+ } else /* EOC */
+ {
WARNING: braces {} are not necessary for any arm of this statement
+ if (data[1]) {
[...]
+ } else {
[...]
ERROR: that open brace { should be on the previous line
+ if (insn->unused[0] == 222) /* second insn read */
+ {
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < insn->n; i++) {
+ data[i] = devpriv->ui_AiReadData[i];
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->start_src != TRIG_NOW && cmd->start_src != TRIG_EXT) {
+ err++;
+ }
ERROR: that open brace { should be on the previous line
+ if (cmd->scan_begin_src == TRIG_TIMER) /* Test Delay timing */
+ {
ERROR: that open brace { should be on the previous line
+ if (cmd->convert_src == TRIG_TIMER) /* Test Acquisition timing */
+ {
WARNING: braces {} are not necessary for any arm of this statement
+ if (cmd->stop_src == TRIG_COUNT) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->b_ExttrigEnable == APCI3120_ENABLE) {
+ i_APCI3120_ExttrigEnable(dev); /* activate EXT trigger */
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dmalen0 > (devpriv->ui_AiDataLength)) {
+ dmalen0 = devpriv->ui_AiDataLength;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dmalen1 > (devpriv->ui_AiDataLength)) {
+ dmalen1 = devpriv->ui_AiDataLength;
+ }
WARNING: braces {} are not necessary for any arm of this statement
+ if (CR_RANGE(chanlist[i]) < APCI3120_BIPOLAR_RANGES) {
[...]
+ } else {
[...]
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_EocEosInterrupt == APCI3120_ENABLE) /* enable this in without DMA ??? */
+ {
ERROR: that open brace { should be on the previous line
+ if (data[0] == APCI3120_TIMER) /* initialize timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* Initialize Watch dog */
+ {
ERROR: that open brace { should be on the previous line
+ if (data[0] == 2) /* write new value */
+ {
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* start watch dog */
+ {
ERROR: that open brace { should be on the previous line
+ if (devpriv->b_Timer2Mode == APCI3120_TIMER) /* start timer */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* Read watch dog status */
+ {
WARNING: braces {} are not necessary for single statement blocks
+ if (!devpriv->b_OutputMemoryStatus) {
+ ui_Temp = 0;
+
+ } /* if(!devpriv->b_OutputMemoryStatus ) */
ERROR: code indent should use tabs where possible
+ data[0] Value to be written$
ERROR: code indent should use tabs where possible
+ data[1] :1 Set digital o/p ON$
ERROR: code indent should use tabs where possible
+ data[1] 2 Set digital o/p OFF with memory ON$
ERROR: that open brace { should be on the previous line
+ if (ui_Range) /* if 1 then unipolar */
+ {
ERROR: that open brace { should be on the previous line
+ } else /* if 0 then bipolar */
+ {
ERROR: that open brace { should be on the previous line
+ do /* Waiting of DA_READY BIT */
+ {
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ NONE$
ERROR: do not initialise statics to 0 or NULL
+static struct pcmcia_device *cur_dev = NULL;
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (dev->iobase) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (it->options[2]) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->registers) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for any arm of this statement
+ if (thisboard->has_dio) {
[...]
+ } else {
[...]
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->BADR0) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->dio_reg_base) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < thisboard->n_8255; i++) {
+ subdev_8255_cleanup(dev, dev->subdevices + i);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->dac) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (inw_p(devpriv->dac + DACALIBRATION1) & SERIAL_OUT_BIT) {
+ value |= 1 << (value_width - i);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < max_num_caldacs; i++) {
+ cal2_bits |= DESELECT_CALDAC_BIT(i);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ for (i = 0; i < max_num_caldacs; i++) {
+ cal2_bits |= DESELECT_CALDAC_BIT(i);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: "foo * bar" should be "foo *bar"
+ uint8_t * data);
WARNING: braces {} are not necessary for single statement blocks
+ if (devpriv->s5933_config) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->count = cmd->chanlist_len * cmd->stop_arg;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ao_count = cmd->chanlist_len * cmd->stop_arg;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (cmd->stop_src == TRIG_COUNT) {
+ devpriv->ao_count -= num_points;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (dev->attached == 0) {
+ return IRQ_NONE;
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if ((status & (INT | EOAI | LADFUL | DAHFI | DAEMI)) == 0) {
+ comedi_error(dev, "spurious interrupt");
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (status & (DAHFI | DAEMI)) {
+ handle_ao_interrupt(dev, status);
+ }
WARNING: braces {} are not necessary for single statement blocks
+ if (async->cmd.stop_src == TRIG_COUNT) {
+ devpriv->ao_count -= num_points;
+ }
ERROR: "foo * bar" should be "foo *bar"
+ uint8_t * data)
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: do not initialise externals to 0 or NULL
+unsigned int ui_InterruptStatus = 0;
WARNING: braces {} are not necessary for single statement blocks
+ else {
+ outl(0x6, devpriv->iobase + APCI1032_DIGITAL_IP_IRQ);
+ } /* else if(data[1] == ADDIDATA_OR) */
WARNING: braces {} are not necessary for single statement blocks
+ if (data[1] == 1) {
+ *data = ui_InterruptStatus;
+ } /* if(data[1]==1) */
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ERROR: code indent should use tabs where possible
+ const struct comedi_lrange *pr_AiRangelist;^I/* rangelist for A/D */$
ERROR: code indent should use tabs where possible
+ const struct comedi_lrange *pr_AoRangelist;^I/* rangelist for D/A */$
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap