Commit Graph

6 Commits

Author SHA1 Message Date
Anson Huang 547e8f5269 ARM: imx: add cpuidle support for i.mx6ul
This patch enables cpuidle driver for i.MX6UL, it
reuses i.MX6SX's cpuidle driver, 3 levels of cpuidle
supported:

1. ARM WFI;
2. SOC in WAIT mode;
3. SOC in WAIT mode + ARM power off.

As i.MX6UL has cortex-A7 CORE with an internal L2
cache, so flushing it before powering down ARM platform
is necessary, flush_cache_all() in last step of cpu_suspend
has very small overhead, just call it to avoid cache
type check for different platforms.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29 22:39:28 +08:00
Anson Huang 6ae44aa651 ARM: imx: enable WAIT mode hardware workaround for imx6sx
Need to enable INT_MEM_CLK_LPM bit in CCM_CGPR for WAIT mode,
without this bit set, if there is pending interrupt during
ARM platform entering WAIT mode without power gating, cache
data will be corrupted, this is a hardware workaround for WAIT
mode and must be enabled.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-08-29 22:39:27 +08:00
Shawn Guo 8fb76a07e2 ARM: imx6: set initial power mode in pm function
Rather than setting initial low-power mode in every single i.MX6 clock
initialization function, we should really do that in pm code.  Let's
move imx6q_set_lpm(WAIT_CLOCKED) call into imx6_pm_common_init().

While at it, let's rename the function to imx6_set_lpm() since it's
actually common for all i.MX6 SoCs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-06-03 14:44:31 +08:00
Daniel Lezcano eeebc3bb4d ARM: cpuidle: Remove duplicate header inclusion
The cpu_do_idle() function is always used by the cpuidle drivers.

That led to have each driver including cpuidle.h and proc-fns.h, they are
always paired. That makes a lot of duplicate headers inclusion. Instead of
including both in each .c file, move the proc-fns.h header inclusion in the
cpuidle.h header file directly, so we can save some line of code.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-03-23 18:03:11 +01:00
Shawn Guo c8aeb7dfe6 ARM: imx: drop CPUIDLE_FLAG_TIME_VALID from cpuidle-imx6sx
As the result of commit b82b6cca48 ("cpuidle: Invert
CPUIDLE_FLAG_TIME_VALID logic"), the flag gets removed and hence we see
the compile error below.

  CC      arch/arm/mach-imx/cpuidle-imx6sx.o
arch/arm/mach-imx/cpuidle-imx6sx.c:69:13: error: ‘CPUIDLE_FLAG_TIME_VALID’ undeclared here (not in a function)

Since the behavior of the original flag has been the default, we can
simply drop the flag now.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-06 20:14:50 +08:00
Anson Huang 05136f0897 ARM: imx: support arm power off in cpuidle for i.mx6sx
This patch introduces an independent cpuidle driver for
i.MX6SX, and supports arm power off in idle, totally
3 levels of cpuidle are supported as below:

1. ARM WFI;
2. SOC in WAIT mode;
3. SOC in WAIT mode + ARM power off.

ARM power off can save at least 5mW power.

This patch also replaces imx6q_enable_rbc with imx6_enable_rbc.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-01-05 21:34:29 +08:00