Commit Graph

26 Commits

Author SHA1 Message Date
Russell King ff39bc772a [PATCH] Serial: remove unused variable in sa1100 driver
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-08 19:26:47 +01:00
Yoichi Yuasa eae936e21b [PATCH] serial: update NEC VR4100 series serial support
- Changed the return value of unknown type to NULL.

- Deleted the NULL check of dev_id in siu_interrupt().

- Deleted the NULL check of port->membase in siu_shutdown().

- Added the NULL check of port->membase to siu_startup().

- Removed early_uart_ops. Now using vr41xx_siu standerd one.

- Changed KSEG1ADDR() in siu_console_setup() to ioremap().

- When uart_add_one_port() failed, changed to set NULL to port->dev.

Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-04 17:13:01 -07:00
David Woodhouse 857dde2e79 When we detect that a 16550 was in fact part of a NatSemi SuperIO chip
with high-speed mode enabled, we switch it to high-speed mode so that
baud_base becomes 921600. However, we also need to multiply the baud
divisor by 8 at the same time, in case it's already in use as a console.

Signed-off-by: David Woodhouse
Acked-by: Tom Rini
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-05-21 15:52:23 +01:00
Linus Torvalds 66e60f9251 Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git/ 2005-05-19 15:31:18 -07:00
Petr Vandrovec f1fc3990e2 [PATCH] serial_cs device identification fix
serial_cs's vendor/device identification got broken by Yum Rayan's change
'[PATCH] serial_cs: Reduce stack usage in serial_event()' - it changed buf
type from u_short* to char*, breaking device manufacturer & card number
retrieval.  Due to this my modem stopped from being recognized as special
case.

Code will work much better if we'll rely on first_tuple's parser instead of
doing parse ourselves.  Code also looks simpler after change.

Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17 07:59:19 -07:00
David S. Miller e4fdee8e3b [SUNSAB]: Defer register updates until transmitter is idle.
The chip can emit garbage characters if we touch the
settings while characters are going out.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-11 11:34:32 -07:00
Russell King 05ab301463 [PATCH] Serial: Add uart_insert_char()
Add uart_insert_char(), which handles inserting characters into the
flip buffer.  This helper function handles the correct semantics
for handling overrun in addition to inserting normal characters.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-09 23:21:59 +01:00
Russell King f1690f37a5 [PATCH] 8250_pci.c: add comment about enum sorting order
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-06 10:19:09 +01:00
Adrian Bunk 408b664a7d [PATCH] make lots of things static
Another large rollup of various patches from Adrian which make things static
where they were needlessly exported.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:29 -07:00
Patrick Gefre 5b052d8bb3 [PATCH] Altix ioc4 serial - Arm the read timeout timer before the first read
Arm the read timeout timer before the first read.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:22 -07:00
Patrick Gefre 68985e486b [PATCH] Altix ioc4 serial - small uart setup mods
Small mods for setting up the uart - parity, flow control

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:21 -07:00
Patrick Gefre 6cb2875f8d [PATCH] Altix ioc4 serial - set a better timeout/threshold
Set the timeout and threshold to better values.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:21 -07:00
Patrick Gefre 149733d4e2 [PATCH] Altix ioc4 serial - set hfc from ioctl
Allow hardware flow control to be set from an ioctl.

Signed-off-by: Patrick Gefre <pfg@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:21 -07:00
Yum Rayan 16f31113a6 [PATCH] serial_cs: Reduce stack usage in serial_event()
This patch reduces the stack usage of the function serial_event() in
serial_cs from 2212 to 228.  I used a patched version of gcc 3.4.3 on i386
with -fno-unit-at-a-time disabled.

This patch is only compile tested.

Acked-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Yum Rayan <yum.rayan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:14 -07:00
Andreas Schwab 434498d532 [PATCH] sn_console: make sal_console_uart static again
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 08:59:12 -07:00
Sascha Hauer 587897f51f [PATCH] ARM: 2654/1: i.MX UART initialization sets and honors UFCR value
Patch from Sascha Hauer

This patch adds UCFR_RFDIV setting into i.MX serial driver.
This is required, if loader does not fully agree with Linux kernel
about UART setup manner. Linux only blindly expected some values until
now. This should enable to use even serial ports not recognized by
boot-loader as for example third UART found in the bluethoot module.
Patch also enables to detect original setup baudrate in more cases.

Signed-off-by: Pavel Pisa
Signed-off-by: Sascha Hauer
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-29 22:46:40 +01:00
Russell King 2b49abac58 [PATCH] Serial: Convert 8250_hp300 to use serial8250_{un,}register_port
Convert 8250_hp300 to use serial8250_register_port() and
serial8250_unregister_port().

Tested by Kars de Jong, 4/4/2005.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:37:45 +01:00
Russell King 2a9604b863 [PATCH] Serial: Move error path processing inline
With unlikely() there's no need for the error path to
use gotos.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:32:00 +01:00
Russell King 45849282bf [PATCH] Serial: Ensure error paths are marked with unlikely()
Ensure ARM serial driver error paths are marked with the
unlikely() compiler hint.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-26 15:29:44 +01:00
Al Viro 2c6e759990 [PATCH] ppc annotations: mpsc
Usual iomem annotations + NULL noise removal.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-25 18:32:12 -07:00
David S. Miller b179fb8ca5 [SPARC64]: In sunsab driver, make sure to set the uart timeout.
This breaks serial consoles badly.  Thanks to Eric Brower
for tracking down the problem.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21 22:18:03 -07:00
David S. Miller 623f41eb92 [SPARC64]: In sunsu driver, make sure to fully init chip for kbd/ms
We were forgetting to call sunsu_change_speed().  The reason
that replugging in the mouse cable "fixes things" is that
causes a BREAK interrupt which in turn caused a call to
sunsu_change_speed() which would get the chip setup properly.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-04-21 22:06:13 -07:00
Russell King 23907eb8c2 [PATCH] serial: fix comments in 8250.c
Fix the formatting of some comments in 8250.c, and add a note that the
register_serial / unregister_serial shouldn't be used in new code.

We do this here in preference to adding to linux/serial.h, since that is used
by a number of non-8250 drivers which pretend to be 8250.  It is not known
whether it would be appropriate to do so.

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:26:39 -07:00
Christoph Hellwig 614a7d6a76 [PATCH] fix up newly added jsm driver
- plug various leaks and use after frees in the remove and
   initialization failure path (some still left)
 - remove useless global list of boards and use pci_set_drvdata instead
 - unobsfucate init path by merging functions together
 - kill various totally useless state variables
 - .. probably more I forgot

Note that the tty part still generates lots of sparse warnings and there's
still a totally useless layer of function pointer indirections, but maybe
someone else will fix that bit up.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:44 -07:00
Pavel Machek 0370affeec [PATCH] fix u32 vs. pm_message_t in drivers/
-rc2-mm1 still contains few places where u32 and pm_message_t.  This fixes
drivers/serial [should change no code].

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16 15:25:35 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00