Commit Graph

6 Commits

Author SHA1 Message Date
Riku Voipio 6935994389 [ARM] mv78xx0: wire i2c support
All the pieces were ready, just matter of assembling
them together.

Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-03 21:06:12 -05:00
Lennert Buytenhek f1f5465782 [ARM] mv78xx0: enable eth2/eth3 on the mv78xx0 A0 development board
The A0 revision of the mv78xx0 development board has four ethernet
ports, with PHY IDs 8-11, whereas the Z0 version has two, with PHY
addresses 8-9.  This patch configures the third and fourth ethernet
port to use the PHY addresses on the A0 board to enable use of those
ports -- if we are running on a Z0 board, the ge10/11 setup code in
common.c will force these back to PHYless mode.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2009-02-19 22:43:14 -05:00
Lennert Buytenhek 04185fc67c [ARM] mv78xx0: force link speed/duplex on eth2/eth3
On the mv78xx0 development board, eth2 and eth3 do not have
corresponding PHYs, but are internally connected, as a way of
facilitating communication between the two CPU cores.  Since there are
no PHYs, we need to tell the network driver explicitly to force the
link on eth2 and eth3 up, to 1000 Mb/s full duplex.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-10-19 14:29:05 -04:00
Lennert Buytenhek ac840605f3 mv643xx_eth: remove force_phy_addr field
Currently, there are two different fields in the
mv643xx_eth_platform_data struct that together describe the PHY
address -- one field (phy_addr) has the address of the PHY, but if
that address is zero, a second field (force_phy_addr) needs to be
set to distinguish the actual address zero from a zero due to not
having filled in the PHY address explicitly (which should mean
'use the default PHY address').

If we are a bit smarter about the encoding of the phy_addr field,
we can avoid the need for a second field -- this patch does that.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-09-05 06:33:59 +02:00
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00
Stanislav Samsonov 794d15b25d [ARM] add Marvell 78xx0 ARM SoC support
The Marvell Discovery Duo (MV78xx0) is a family of ARM SoCs featuring
(depending on the model) one or two Feroceon CPU cores with 512K of L2
cache and VFP coprocessors running at (depending on the model) between
800 MHz and 1.2 GHz, and features a DDR2 controller, two PCIe
interfaces that can each run either in x4 or quad x1 mode, three USB
2.0 interfaces, two 3Gb/s SATA II interfaces, a SPI interface, two
TWSI interfaces, a crypto accelerator, IDMA/XOR engines, a SPI
interface, four UARTs, and depending on the model, two or four gigabit
ethernet interfaces.

This patch adds basic support for the platform, and allows booting
on the MV78x00 development board, with functional UARTs, SATA, PCIe,
GigE and USB ports.

Signed-off-by: Stanislav Samsonov <samsonov@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-22 22:45:10 +02:00