Commit Graph

989 Commits

Author SHA1 Message Date
Linus Torvalds 2cf4d4514d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (417 commits)
  MAINTAINERS: EB110ATX is not ebsa110
  MAINTAINERS: update Eric Miao's email address and status
  fb: add support of LCD display controller on pxa168/910 (base layer)
  [ARM] 5552/1: ep93xx get_uart_rate(): use EP93XX_SYSCON_PWRCNT and EP93XX_SYSCON_PWRCN
  [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines
  [ARM] 5544/1: Trust PrimeCell resource sizes
  [ARM] pxa/sharpsl_pm: cleanup of gpio-related code.
  [ARM] pxa/sharpsl_pm: drop set_irq_type calls
  [ARM] pxa/sharpsl_pm: merge pxa-specific code into generic one
  [ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
  [ARM] sa1100: remove unused collie_pm.c
  [ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
  [ARM] 5550/1: Add default configure file for w90p910 platform
  [ARM] 5549/1: Add clock api for w90p910 platform.
  [ARM] 5548/1: Add gpio api for w90p910 platform
  [ARM] 5551/1: Add multi-function pin api for w90p910 platform.
  [ARM] Make ARM_VIC_NR depend on ARM_VIC
  [ARM] 5546/1: ARM PL022 SSP/SPI driver v3
  ARM: OMAP4: SMP: Update defconfig for OMAP4430
  ARM: OMAP4: SMP: Enable SMP support for OMAP4430
  ...
2009-06-14 13:42:43 -07:00
Russell King 4c31791c3d Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel 2009-06-14 11:00:16 +01:00
Russell King 547c32aeb5 Merge branch for-rmk-devel of git://aeryn.fluff.org.uk/bjdooks/linux into devel 2009-06-10 22:41:06 +01:00
Mark Brown 236e6723be ASoC: Fix lm4857 control
Commit 4eaa9819dc changed semantics of
private_value member of kcontrol. This resulted in inability to control
amplifier and subsequently in very low output volume.

Tested-by: Johannes Schauer <josch@pyneo.org>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-10 13:55:34 +01:00
Mark Brown 74b8f955a7 ASoC: Apostrophe patrol
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-06 11:26:15 +01:00
Troy Kisky ccff4b15e0 ASoC: codec tlv320aic23 fix bogus divide by 0 message
Some code analyzer software mistakenly gives
divide by 0 error messages for these lines.
This patch will end its confusion.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-06 09:24:48 +01:00
Marek Vasut 37330efd4a [ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-06-05 10:41:54 +08:00
Daniel Mack e3509ff0fb ASoC: fix NULL pointer dereference in soc_suspend()
In case the initalization of an soc_device failed, there is no codec
associated with it. soc_suspend() will still dereference the pointer
and cause an Ooops when entering the sleep mode.

This happens on our board with a multi-target kernel image when booted
on a machine without audio circuits.

This patch makes the code bail out very early in this special case.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-04 13:24:08 +01:00
Takashi Iwai d08664fdb5 ASoC: Fix build error in twl4030.c
Fix the (likely cut-n-paste) error by commit
16a30fbb0d, which causes the error below:
  sound/soc/codecs/twl4030.c: In function 'twl4030_read_reg_cache':
  sound/soc/codecs/twl4030.c:152: error: 'cache' undeclared (first use in this function)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-06-04 10:01:11 +02:00
Cliff Cai f692fce0cf ASoC: SSM2602: assign last substream to the master when shutting down
Fixes crash when shutting down.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-03 11:38:23 +01:00
Sonic Zhang cf485da15a ASoC: Blackfin: document how anomaly 05000250 is handled
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-03 11:31:42 +01:00
Cliff Cai 80d5bd9314 ASoC: Blackfin: set the transfer size according the ac97_frame size
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-03 11:30:01 +01:00
Cliff Cai 2552a710f4 ASoC: SSM2602: remove unsupported sample rates
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-03 11:25:51 +01:00
Peter Ujfalusi eaf1ac8bb5 ASoC: TWL4030: Check the interface format for 4 channel mode
In addition to the operating mode check, also check the
codec's interface format in case of four channel mode.
If the codec is not in TDM (DSP_A) mode, return with error.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-06-01 23:46:08 +01:00
Peter Ujfalusi 16a30fbb0d ASoC: TWL4030: Use reg_cache in twl4030_init_chip
Use the codec->reg_cache instead of the array directly
in twl4030_init_chip for setting the default values.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-29 11:02:48 +01:00
Mark Brown 203350c1a8 ASoC: Initialise dev for the dummy S/PDIF DAI
Also include the header to make sure the DAI is prototyped.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-28 18:54:52 +01:00
Chaithrika U S be461ba836 ASoC: Add dummy S/PDIF codec support
McASP on DM646x can operate in DIT (S/PDIF) where no codec is needed.
This patch provides stub codec that can be used in these configurations.
On DM646x EVM the McASP1 is connected to the S/PDIF out.

Signed-off-by: Steve Chen <schen@mvista.com>
Signed-off-by: Pavel Kiryukhin <pkiryukhin@ru.mvista.com>
Signed-off-by: Naresh Medisetty <naresh@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-28 14:48:38 +01:00
Roel Kluin 449bd54dcb ASoC: correct print specifiers for unsigneds
Unsigned variables should use `%u' rather than `%d'.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-28 10:20:26 +01:00
Jon Smirl ea8b27ad0c ASoC: Modify mpc5200 AC97 driver to use V9 of spin_event_timeout()
The function signature for spin_event_timeout() has changed in version V9.
Adjust the mpc5200 AC97 driver to use the new function.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-27 21:10:37 +01:00
Mark Brown 08d15f034e ASoC: Switch FSL SSI DAI over to symmetric_rates
The effect of symmetric_constraints should provide a standard way to
enforce the use of the same sample rate for both directions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Timur Tabi <timur@freescale.com>
2009-05-27 11:12:45 +01:00
Mark Brown 0c0e09e21a ASoC: Mark MPC5200 AC97 as BROKEN until PowerPC merge issues are resolved
These drivers use spin_event_timeout() which is only present in the
PowerPC tree at present and which is undergoing some API revisions
so temporarily mark them as BROKEN until these issues are sorted
out.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26 21:14:59 +01:00
Jon Smirl 6ffee43ecf ASoC: Fabric bindings for STAC9766 on the Efika
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26 21:13:02 +01:00
Jon Smirl a9262c4fd4 ASoC: Support for AC97 on Phytec pmc030 base board.
A wm9712 AC97 codec is used.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26 21:13:01 +01:00
Jon Smirl 20d0e1520e ASoC: AC97 driver for mpc5200
I've implemented retries for when the AC97 hardware doesn't reset on
first try. About 10% of the time both the Efika and pcm030 AC97 codecs
don't reset on first try and need to be poked multiple times.  Failure
is indicated by not having the link clock start ticking. Every once in
a while even five pokes won't get the link started and I have to power
cycle.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26 21:13:00 +01:00
Jon Smirl dbcc347562 ASoC: Main rewite of the mpc5200 audio DMA code
Rewrite the mpc5200 audio DMA code to support both I2S and AC97.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-26 21:12:50 +01:00
Peter Ujfalusi 0f89bdcac6 ASoC: TWL4030: HandsfreeL/R mute DAPM switch
Add DAPM switch for HeadsetL/R mute. Since all bits are are needed
for the HFL/R pop removal to work the switch is using the SW_SHADOW
no HW register for the HandsfreeL/R mute.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-25 11:54:14 +01:00
Peter Ujfalusi f3b5d3002d ASoC: TWL4030: Add shadow register
Shadow, non HW register for dealing with the HandsfreeL/R
muting.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-25 11:54:14 +01:00
Peter Ujfalusi 5a2e9a48b1 ASoC: TWL4030: Handsfree pop removal redesign
Move the HandsfreeL/R (IHFL/R) pop removal code from the DAPM_MUX_E
to a more appropriate DAPM_PGA_E widget.
Also fix the power-up sequence to match with the TRM.
The power-down sequence is not described in the TRM, so do it
in a way, which seams like the correct sequence.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-25 11:54:13 +01:00
Jon Smirl cebe77674c ASoC: Rename the PSC functions to DMA
Rename the functions in the mpc5200 DMA file from i2s based names to dma
ones to reflect the file they are in.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-24 19:31:03 +01:00
Jon Smirl 89dd084252 ASoC: Basic split of mpc5200 DMA code out of mpc5200_psc_i2s
Basic split of mpc5200 DMA code out from i2s into a standalone file.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-24 19:31:03 +01:00
Mark Brown 05e1efa2de ASoC: Fix minor issues in STAC9766 driver
Fairly minor issues:
 - Don't register the DAIs, it's not required for AC97 devices.
 - Make unexported functions static.
 - Wrap some excessively long lines.
 - Undo tab/space breakage.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-24 13:32:24 +01:00
Jon Smirl 3c166c7f18 ASoC: Codec for STAC9766 used on the Efika
Datasheet: http://www.idt.com/products/getDoc.cfm?docID=13134007

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-24 13:15:21 +01:00
Mark Brown 0154724d48 ASoC: Fix WM9081 PowerPC compiler issues
Ensure that we always set a new sysclk when using the FLL in master mode
and pick out the correct value for the sample rate in hw_params().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-23 10:24:15 +01:00
Mark Brown 86ed3669f0 ASoC: WM9081 mono DAC with integrated 2.6W class AB/D amplifier driver
The WM9081 is designed to provide high power output at low distortion
levels in space-constrained portable applications.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-22 15:11:22 +01:00
Peter Ujfalusi b4852b793a ASoC: TWL4030: Differentiate the playback streams
Give unique stream names for the two playback streams so
DAPM can figure out which codec_dai is in use.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-22 15:08:43 +01:00
Peter Ujfalusi 7385ba44f8 ASoC: SDP4030: Use the twl4030_setup_data for headset pop-removal
With this patch the initial headset pop-removal related values are
configured for the twl4030 codec (ramp delay and sysclk).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-22 10:23:22 +01:00
Peter Ujfalusi 9da28c7b38 ASoC: TWL4030: Add support for platform dependent configuration
twl4030_setup_data structure can be passed from platform drivers to
the codec via the snd_soc_device->codec_data pointer.

Currently the setup data has support for the Headset pop-removal
related configuration, which differs from board to board.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-22 10:23:22 +01:00
Ben Dooks 99ae99533a [ARM] S3C24XX: Merge devel-gpio
Merge branch 'devel-gpio' into for-rmk-devel
2009-05-21 22:10:21 +01:00
Peter Ujfalusi 6943c92e87 ASoC: TWL4030: Move the Headset pop-attenuation code to PGA event
This patch adds SND_SOC_DAPM_PGA_E to the headset path, which handles
the headset ramp up and down sequences needed for the pop noise
removal.

With this patch the order of the internal components in the twl4030
codec is turned on and off in a correct order.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Tested-by: Jarkko Nikula <jhnikula@gmail.com>
Tested-by: Misael Lopez Cruz  <x0052729@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-20 09:53:25 +01:00
Peter Ujfalusi 4005d39a5f ASoC: TWL4030: Change DAPM routings and controls for DACs and PGAs
Restructuring the twl4030 codec's DAPM routing to be able to handle the power
sequences correctly.

The twl4030 codec internal implementation have this order:
DAC -> Analog PGA -> Mixer/Mux

While the ASoC framework expects the following order:
DAC -> Mixer -> Analog PGA

This patch moves the Analog PGA handling from SND_SOC_DAPM_PGA to _MIXER and
adds two levels of mixer to handle the digital and analog loopback
functionality.

Now the analog loopback does not powers on any of the DACs.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Tested-by: Jarkko Nikula <jhnikula@gmail.com>
Tested-by: Misael Lopez Cruz  <x0052729@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-20 09:52:51 +01:00
Atsushi Nemoto e24805dd85 ASoC: Add TXx9 AC link controller driver (v3)
This patch adds support for the integrated ACLC of the TXx9 family.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-19 19:54:28 +01:00
Lopez Cruz, Misael 11a7281106 ASoC: SDP3430: Connect twl4030 voice DAI to McBSP3
Connect twl4030 voice DAI to McBSP3 in sdp3430 machine driver.
Voice DAI init function enables corresponding interface by
writting directly to VOICE_IF codec register.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujflausi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-19 10:35:11 +01:00
Lopez Cruz, Misael b74bd40fa4 ASoC: TWL4030: Add control for selecting codec operation mode
Add a control for selecting the codec operation mode. TWL4030 codec
has two modes:
- Option 1. Audio only (4 audio DACs)
- Option 2. Voice/Audio (2 audio DACs and voice ADC/DAC)

Control is restricted when a stream is ongoing, since codec's
operation mode cannot be changed on-the-fly.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujflausi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-19 10:35:11 +01:00
Peter Ujfalusi 181da78cd0 ASoC: TWL4030: Fix Analog capture path for AUXR
AUXR is selected by bit 2 and not by bit 1 in the ANAMICR register.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-19 09:38:57 +01:00
Ben Dooks ec976d6eb0 [ARM] S3C24XX: GPIO: Move gpio functions out of <mach/hardware.h>
Move all the gpio functions out of <mach/hardware.h> as
this file is for defining the generic IO base addresses
for the kernel IO calls.

Make a new header <mach/gpio-fns.h> to take this and
include it via the chain from <linux/gpio.h> which is
what most of these files should be using (and will be
changed as soon as possible).

Note, this does make minor changes to some drivers but
should not mess up any pending merges.

CC: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-18 16:25:40 +01:00
Mark Brown f83fba8baa ASoC: Add debug trace for bias level transitions
A standard way of making sure we know when the bias level changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18 15:53:16 +01:00
Mark Brown 452c5eaa0d ASoC: Integrate bias management with DAPM power management
Rather than managing the bias level of the system based on if there is
an active audio stream manage it based on there being an active DAPM
widget. This simplifies the code a little, moving the power handling
into one place, and improves audio performance for bypass paths when no
playbacks or captures are active.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18 15:53:16 +01:00
Mark Brown aef908434c ASoC: Make DAPM sysfs entries non-optional
sysfs is so standard these days there's no point.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18 15:53:15 +01:00
Mark Brown 6d3ddc81f5 ASoC: Split DAPM power checks from sequencing of power changes
DAPM has always applied any changes to the power state of widgets as soon
as it has determined that they are required. Instead of doing this store
all the changes that are required on lists of widgets to power up and
down, then iterate over those lists and apply the changes. This changes
the sequence in which changes are implemented, doing all power downs
before power ups and always using the up/down sequences (previously they
were only used when changes were due to DAC/ADC power events). The error
handling is also changed so that we continue attempting to power widgets
if some changes fail.

The main benefit of this is to allow future changes to do optimisations
over the whole power sequence and to reduce the number of walks of the
widget graph required to check the power status of widgets.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18 15:53:14 +01:00
Misael Lopez Cruz b7a755a8a1 ASoC: TWL4030: Enable/disable voice digital filters
Enable TWL4030 VTXL/VTXR and VRX digital filters for uplink
and downlink paths, respectively.

This patch also corrects voice 8/16kHz mode selection bit
(SEL_16K) of CODEC_MODE register.

Signed-off-by: Misael Lopez Cruz <x0052729@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-18 11:13:12 +01:00