Commit Graph

23 Commits

Author SHA1 Message Date
Len Brown c0dc250e89 Pull acpi_os_allocate into test branch 2006-07-10 02:39:47 -04:00
Len Brown e21c1ca3f9 ACPI: acpi_os_allocate() fixes
Replace acpi_in_resume with a more general hack
to check irqs_disabled() on any kmalloc() from ACPI.
While setting (system_state != SYSTEM_RUNNING) on resume
seemed more general, Andrew Morton preferred this approach.

http://bugzilla.kernel.org/show_bug.cgi?id=3469

Make acpi_os_allocate() into an inline function to
allow /proc/slab_allocators to work.

Delete some memset() that could fault on allocation failure.

Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-10 02:37:22 -04:00
Len Brown ab8aa06a5c ACPI: acpi_os_get_thread_id() returns current
Linux mutexes and the debug code that that reference
acpi_os_get_thread_id() are happy with 0.
But the AML mutexes in exmutex.c expect a unique non-zero
number for each thread - as they track this thread_id
to permit the mutex re-entrancy defined by the ACPI spec.

http://bugzilla.kernel.org/show_bug.cgi?id=6687

Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-09 15:19:44 -04:00
Bob Moore 967440e3be ACPI: ACPICA 20060623
Implemented a new acpi_spinlock type for the OSL lock
interfaces.  This allows the type to be customized to
the host OS for improved efficiency (since a spinlock is
usually a very small object.)

Implemented support for "ignored" bits in the ACPI
registers.  According to the ACPI specification, these
bits should be preserved when writing the registers via
a read/modify/write cycle. There are 3 bits preserved
in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9],
and PM1_STATUS[11].
http://bugzilla.kernel.org/show_bug.cgi?id=3691

Implemented the initial deployment of new OSL mutex
interfaces.  Since some host operating systems have
separate mutex and semaphore objects, this feature was
requested. The base code now uses mutexes (and the new
mutex interfaces) wherever a binary semaphore was used
previously. However, for the current release, the mutex
interfaces are defined as macros to map them to the
existing semaphore interfaces.

Fixed several problems with the support for the control
method SyncLevel parameter. The SyncLevel now works
according to the ACPI specification and in concert with the
Mutex SyncLevel parameter, since the current SyncLevel is
a property of the executing thread. Mutual exclusion for
control methods is now implemented with a mutex instead
of a semaphore.

Fixed three instances of the use of the C shift operator
in the bitfield support code (exfldio.c) to avoid the use
of a shift value larger than the target data width. The
behavior of C compilers is undefined in this case and can
cause unpredictable results, and therefore the case must
be detected and avoided.  (Fiodor Suietov)

Added an info message whenever an SSDT or OEM table
is loaded dynamically via the Load() or LoadTable()
ASL operators. This should improve debugging capability
since it will show exactly what tables have been loaded
(beyond the tables present in the RSDT/XSDT.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-28 03:11:38 -04:00
Linus Torvalds 37224470c8 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (65 commits)
  ACPI: suppress power button event on S3 resume
  ACPI: resolve merge conflict between sem2mutex and processor_perflib.c
  ACPI: use for_each_possible_cpu() instead of for_each_cpu()
  ACPI: delete newly added debugging macros in processor_perflib.c
  ACPI: UP build fix for bugzilla-5737
  Enable P-state software coordination via _PDC
  P-state software coordination for speedstep-centrino
  P-state software coordination for acpi-cpufreq
  P-state software coordination for ACPI core
  ACPI: create acpi_thermal_resume()
  ACPI: create acpi_fan_suspend()/acpi_fan_resume()
  ACPI: pass pm_message_t from acpi_device_suspend() to root_suspend()
  ACPI: create acpi_device_suspend()/acpi_device_resume()
  ACPI: replace spin_lock_irq with mutex for ec poll mode
  ACPI: Allow a WAN module enable/disable on a Thinkpad X60.
  sem2mutex: acpi, acpi_link_lock
  ACPI: delete unused acpi_bus_drivers_lock
  sem2mutex: drivers/acpi/processor_perflib.c
  ACPI add ia64 exports to build acpi_memhotplug as a module
  ACPI: asus_acpi_init(): propagate correct return value
  ...

Manual resolve of conflicts in:

	arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
	arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
	include/acpi/processor.h
2006-06-23 07:52:36 -07:00
Bob Moore b229cf92ee ACPI: ACPICA 20060421
Removed a device initialization optimization introduced in
20051216 where the _STA method was not run unless an _INI
was also present for the same device. This optimization
could cause problems because it could allow _INI methods
to be run within a not-present device subtree (If a
not-present device had no _INI, _STA would not be run,
the not-present status would not be discovered, and the
children of the device would be incorrectly traversed.)

Implemented a new _STA optimization where namespace
subtrees that do not contain _INI are identified and
ignored during device initialization. Selectively running
_STA can significantly improve boot time on large machines
(with assistance from Len Brown.)

Implemented support for the device initialization case
where the returned _STA flags indicate a device not-present
but functioning. In this case, _INI is not run, but the
device children are examined for presence, as per the
ACPI specification.

Implemented an additional change to the IndexField support
in order to conform to MS behavior. The value written to
the Index Register is not simply a byte offset, it is a
byte offset in units of the access width of the parent
Index Field. (Fiodor Suietov)

Defined and deployed a new OSL interface,
acpi_os_validate_address().  This interface is called during
the creation of all AML operation regions, and allows
the host OS to exert control over what addresses it will
allow the AML code to access. Operation Regions whose
addresses are disallowed will cause a runtime exception
when they are actually accessed (will not affect or abort
table loading.)

Defined and deployed a new OSL interface,
acpi_os_validate_interface().  This interface allows the host OS
to match the various "optional" interface/behavior strings
for the _OSI predefined control method as appropriate
(with assistance from Bjorn Helgaas.)

Restructured and corrected various problems in the
exception handling code paths within DsCallControlMethod
and DsTerminateControlMethod in dsmethod (with assistance
from Takayoshi Kochi.)

Modified the Linux source converter to ignore quoted string
literals while converting identifiers from mixed to lower
case. This will correct problems with the disassembler
and other areas where such strings must not be modified.

The ACPI_FUNCTION_* macros no longer require quotes around
the function name. This allows the Linux source converter
to convert the names, now that the converter ignores
quoted strings.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14 02:30:55 -04:00
Bob Moore 793c2388ca ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.

Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621

Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)

Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object().  (Valery Podrezov,
Fiodor Suietov)

Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)

Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14 02:04:16 -04:00
Bob Moore 61686124f4 [ACPI] ACPICA 20060317
Implemented the use of a cache object for all internal
namespace nodes. Since there are about 1000 static nodes
in a typical system, this will decrease memory use for
cache implementations that minimize per-allocation overhead
(such as a slab allocator.)

Removed the reference count mechanism for internal
namespace nodes, since it was deemed unnecessary. This
reduces the size of each namespace node by about 5%-10%
on all platforms. Nodes are now 20 bytes for the 32-bit
case, and 32 bytes for the 64-bit case.

Optimized several internal data structures to reduce
object size on 64-bit platforms by packing data within
the 64-bit alignment. This includes the frequently used
ACPI_OPERAND_OBJECT, of which there can be ~1000 static
instances corresponding to the namespace objects.

Added two new strings for the predefined _OSI method:
"Windows 2001.1 SP1" and "Windows 2006".

Split the allocation tracking mechanism out to a separate
file, from utalloc.c to uttrack.c. This mechanism appears
to be only useful for application-level code. Kernels may
wish to not include uttrack.c in distributions.

Removed all remnants of the obsolete ACPI_REPORT_* macros
and the associated code. (These macros have been replaced
by the ACPI_ERROR and ACPI_WARNING macros.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-14 01:22:20 -04:00
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00
Len Brown ec7381d6bf ACPI: inline trivial acpi_os_get_thread_id()
acpi_os_get_thread_id() is used only for debugging
code that is not enabled on Linux, so stub it out.

Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-01 05:12:23 -05:00
Bob Moore 8313524a0d ACPI: ACPICA 20060310
Tagged all external interfaces to the subsystem with the
new ACPI_EXPORT_SYMBOL macro. This macro can be defined
as necessary to assist kernel integration. For Linux,
the macro resolves to the EXPORT_SYMBOL macro. The default
definition is NULL.

Added the ACPI_THREAD_ID type for the return value from
acpi_os_get_thread_id(). This allows the host to define this
as necessary to simplify kernel integration. The default
definition is ACPI_NATIVE_UINT.

Valery Podrezov fixed two interpreter problems related
to error processing, the deletion of objects, and placing
invalid pointers onto the internal operator result stack.
http://bugzilla.kernel.org/show_bug.cgi?id=6028
http://bugzilla.kernel.org/show_bug.cgi?id=6151

Increased the reference count threshold where a warning is
emitted for large reference counts in order to eliminate
unnecessary warnings on systems with large namespaces
(especially 64-bit.) Increased the value from 0x400
to 0x800.

Due to universal disagreement as to the meaning of the
'c' in the calloc() function, the ACPI_MEM_CALLOCATE
macro has been renamed to ACPI_ALLOCATE_ZEROED so that the
purpose of the interface is 'clear'. ACPI_MEM_ALLOCATE and
ACPI_MEM_FREE are renamed to ACPI_ALLOCATE and ACPI_FREE.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-01 01:26:39 -05:00
Bob Moore b8e4d89357 [ACPI] ACPICA 20060127
Implemented support in the Resource Manager to allow
unresolved namestring references within resource package
objects for the _PRT method. This support is in addition
to the previously implemented unresolved reference
support within the AML parser. If the interpreter slack
mode is enabled (true on Linux unless acpi=strict),
these unresolved references will be passed through
to the caller as a NULL package entry.
http://bugzilla.kernel.org/show_bug.cgi?id=5741

Implemented and deployed new macros and functions for
error and warning messages across the subsystem. These
macros are simpler and generate less code than their
predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION,
ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_*
macros.

Implemented the acpi_cpu_flags type to simplify host OS
integration of the Acquire/Release Lock OSL interfaces.
Suggested by Steven Rostedt and Andrew Morton.

Fixed a problem where Alias ASL operators are sometimes
not correctly resolved. causing AE_AML_INTERNAL
http://bugzilla.kernel.org/show_bug.cgi?id=5189
http://bugzilla.kernel.org/show_bug.cgi?id=5674

Fixed several problems with the implementation of the
ConcatenateResTemplate ASL operator. As per the ACPI
specification, zero length buffers are now treated as a
single EndTag. One-length buffers always cause a fatal
exception. Non-zero length buffers that do not end with
a full 2-byte EndTag cause a fatal exception.

Fixed a possible structure overwrite in the
AcpiGetObjectInfo external interface. (With assistance
from Thomas Renninger)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-31 03:25:09 -05:00
Bob Moore 4a90c7e862 [ACPI] ACPICA 20060113
Added 2006 copyright.

At SuSE's suggestion, enabled all error messages
without enabling function tracing, ie with CONFIG_ACPI_DEBUG=n

Replaced all instances of the ACPI_DEBUG_PRINT macro invoked at
the ACPI_DB_ERROR and ACPI_DB_WARN debug levels with
the ACPI_REPORT_ERROR and ACPI_REPORT_WARNING macros,
respectively. This preserves all error and warning messages
in the non-debug version of the ACPICA code (this has been
referred to as the "debug lite" option.) Over 200 cases
were converted to create a total of over 380 error/warning
messages across the ACPICA code. This increases the code
and data size of the default non-debug version by about 13K.
Added ACPI_NO_ERROR_MESSAGES flag to enable deleting all messages.
The size of the debug version remains about the same.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-20 02:23:50 -05:00
Bob Moore c51a4de85d [ACPI] ACPICA 20051117
Fixed a problem in the AML parser where the method thread
count could be decremented below zero if any errors
occurred during the method parse phase. This should
eliminate AE_AML_METHOD_LIMIT exceptions seen on some
machines. This also fixed a related regression with the
mechanism that detects and corrects methods that cannot
properly handle reentrancy (related to the deployment of
the new OwnerId mechanism.)

Eliminated the pre-parsing of control methods (to detect
errors) during table load. Related to the problem above,
this was causing unwind issues if any errors occurred
during the parse, and it seemed to be overkill. A table
load should not be aborted if there are problems with
any single control method, thus rendering this feature
rather pointless.

Fixed a problem with the new table-driven resource manager
where an internal buffer overflow could occur for small
resource templates.

Implemented a new external interface, acpi_get_vendor_resource()
This interface will find and return a vendor-defined
resource descriptor within a _CRS or _PRS
method via an ACPI 3.0 UUID match. (from Bjorn Helgaas)

Removed the length limit (200) on string objects as
per the upcoming ACPI 3.0A specification. This affects
the following areas of the interpreter: 1) any implicit
conversion of a Buffer to a String, 2) a String object
result of the ASL Concatentate operator, 3) the String
object result of the ASL ToString operator.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-10 00:27:56 -05:00
Bob Moore 0897831bb5 [ACPI] ACPICA 20051021
Implemented support for the EM64T and other x86_64
processors. This essentially entails recognizing
that these processors support non-aligned memory
transfers. Previously, all 64-bit processors were assumed
to lack hardware support for non-aligned transfers.

Completed conversion of the Resource Manager to nearly
full table-driven operation. Specifically, the resource
conversion code (convert AML to internal format and the
reverse) and the debug code to dump internal resource
descriptors are fully table-driven, reducing code and data
size and improving maintainability.

The OSL interfaces for Acquire and Release Lock now use a
64-bit flag word on 64-bit processors instead of a fixed
32-bit word. (Alexey Starikovskiy)

Implemented support within the resource conversion code
for the Type-Specific byte within the various ACPI 3.0
*WordSpace macros.

Fixed some issues within the resource conversion code for
the type-specific flags for both Memory and I/O address
resource descriptors. For Memory, implemented support
for the MTP and TTP flags. For I/O, split the TRS and TTP
flags into two separate fields.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-12-10 00:22:54 -05:00
Robert Moore bda663d36b [ACPI] ACPICA 20050916
Fixed a problem within the Resource Manager where
support for the Generic Register descriptor was not fully
implemented.  This descriptor is now fully recognized,
parsed, disassembled, and displayed.

Restructured the Resource Manager code to utilize
table-driven dispatch and lookup, eliminating many of the
large switch() statements.  This reduces overall subsystem
code size and code complexity.  Affects the resource parsing
and construction, disassembly, and debug dump output.

Cleaned up and restructured the debug dump output for all
resource descriptors.  Improved readability of the output
and reduced code size.

Fixed a problem where changes to internal data structures
caused the optional ACPI_MUTEX_DEBUG code to fail
compilation if specified.

Signed-off-by: Robert Moore <Robert.Moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-21 23:51:39 -04:00
Len Brown 4be44fcd3b [ACPI] Lindent all ACPI files
Signed-off-by: Len Brown <len.brown@intel.com>
2005-08-05 00:45:14 -04:00
Robert Moore 0c9938cc75 [ACPI] ACPICA 20050729 from Bob Moore
Implemented support to ignore an attempt to install/load
a particular ACPI table more than once. Apparently there
exists BIOS code that repeatedly attempts to load the same
SSDT upon certain events. Thanks to Venkatesh Pallipadi.

Restructured the main interface to the AML parser in
order to correctly handle all exceptional conditions. This
will prevent leakage of the OwnerId resource and should
eliminate the AE_OWNER_ID_LIMIT exceptions seen on some
machines. Thanks to Alexey Starikovskiy.

Support for "module level code" has been disabled in this
version due to a number of issues that have appeared
on various machines. The support can be enabled by
defining ACPI_ENABLE_MODULE_LEVEL_CODE during subsystem
compilation. When the issues are fully resolved, the code
will be enabled by default again.

Modified the internal functions for debug print support
to define the FunctionName parameter as a (const char *)
for compatibility with compiler built-in macros such as
__FUNCTION__, etc.

Linted the entire ACPICA source tree for both 32-bit
and 64-bit.

Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-30 00:51:39 -04:00
Len Brown 5d75ab4559 [ACPI] handle const char * __FUNCTION__ in debug code
build warning: discards qualifiers from pointer target type
when mixing "const char *" and "char *"

We should probably update the routines to expect const,
but easier for now to shut up the warning with 1 cast.

Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-29 00:08:42 -04:00
Robert Moore f9f4601f33 ACPICA 20050708 from Bob Moore <robert.moore@intel.com>
The use of the CPU stack in the debug version of the
subsystem has been considerably reduced.  Previously, a
debug structure was declared in every function that used
the debug macros.  This structure has been removed in
favor of declaring the individual elements as parameters
to the debug functions.  This reduces the cumulative stack
use during nested execution of ACPI function calls at the
cost of a small increase in the code size of the debug
version of the subsystem.  With assistance from Alexey
Starikovskiy and Len Brown.

Added the ACPI_GET_FUNCTION_NAME macro to enable the
compiler-dependent headers to define a macro that will
return the current function name at runtime (such as
__FUNCTION__ or _func_, etc.) The function name is used
by the debug trace output.  If ACPI_GET_FUNCTION_NAME
is not defined in the compiler-dependent header, the
function name is saved on the CPU stack (one pointer per
function.) This mechanism is used because apparently there
exists no standard ANSI-C defined macro that that returns
the function name.

Alexey Starikovskiy redesigned and reimplemented the
"Owner ID" mechanism used to track namespace objects
created/deleted by ACPI tables and control method
execution.  A bitmap is now used to allocate and free the
IDs, thus solving the wraparound problem present in the
previous implementation.  The size of the namespace node
descriptor was reduced by 2 bytes as a result.

Removed the UINT32_BIT and UINT16_BIT types that were used
for the bitfield flag definitions within the headers for
the predefined ACPI tables.  These have been replaced by
UINT8_BIT in order to increase the code portability of
the subsystem.  If the use of UINT8 remains a problem,
we may be forced to eliminate bitfields entirely because
of a lack of portability.

Alexey Starikovksiy enhanced the performance of
acpi_ut_update_object_reference.  This is a frequently used
function and this improvement increases the performance
of the entire subsystem.

Alexey Starikovskiy fixed several possible memory leaks
and the inverse - premature object deletion.

Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-14 00:42:23 -04:00
Robert Moore 73459f73e5 ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com>
ACPICA 20050617:

Moved the object cache operations into the OS interface
layer (OSL) to allow the host OS to handle these operations
if desired (for example, the Linux OSL will invoke the
slab allocator).  This support is optional; the compile
time define ACPI_USE_LOCAL_CACHE may be used to utilize
the original cache code in the ACPI CA core.  The new OSL
interfaces are shown below.  See utalloc.c for an example
implementation, and acpiosxf.h for the exact interface
definitions.  Thanks to Alexey Starikovskiy.
	acpi_os_create_cache
	acpi_os_delete_cache
	acpi_os_purge_cache
	acpi_os_acquire_object
	acpi_os_release_object

Modified the interfaces to acpi_os_acquire_lock and
acpi_os_release_lock to return and restore a flags
parameter.  This fits better with many OS lock models.
Note: the current execution state (interrupt handler
or not) is no longer passed to these interfaces.  If
necessary, the OSL must determine this state by itself, a
simple and fast operation.  Thanks to Alexey Starikovskiy.

Fixed a problem in the ACPI table handling where a valid
XSDT was assumed present if the revision of the RSDP
was 2 or greater.  According to the ACPI specification,
the XSDT is optional in all cases, and the table manager
therefore now checks for both an RSDP >=2 and a valid
XSDT pointer.  Otherwise, the RSDT pointer is used.
Some ACPI 2.0 compliant BIOSs contain only the RSDT.

Fixed an interpreter problem with the Mid() operator in the
case of an input string where the resulting output string
is of zero length.  It now correctly returns a valid,
null terminated string object instead of a string object
with a null pointer.

Fixed a problem with the control method argument handling
to allow a store to an Arg object that already contains an
object of type Device.  The Device object is now correctly
overwritten.  Previously, an error was returned.

ACPICA 20050624:

Modified the new OSL cache interfaces to use ACPI_CACHE_T
as the type for the host-defined cache object.  This allows
the OSL implementation to define and type this object in
any manner desired, simplifying the OSL implementation.
For example, ACPI_CACHE_T is defined as kmem_cache_t for
Linux, and should be defined in the OS-specific header
file for other operating systems as required.

Changed the interface to AcpiOsAcquireObject to directly
return the requested object as the function return (instead
of ACPI_STATUS.) This change was made for performance
reasons, since this is the purpose of the interface in the
first place.  acpi_os_acquire_object is now similar to the
acpi_os_allocate interface.  Thanks to Alexey Starikovskiy.

Modified the initialization sequence in
acpi_initialize_subsystem to call the OSL interface
acpi_osl_initialize first, before any local initialization.
This change was required because the global initialization
now calls OSL interfaces.

Restructured the code base to split some files because
of size and/or because the code logically belonged in a
separate file.  New files are listed below.

  utilities/utcache.c	/* Local cache interfaces */
  utilities/utmutex.c	/* Local mutex support */
  utilities/utstate.c	/* State object support */
  parser/psloop.c	/* Main AML parse loop */

Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-13 23:45:36 -04:00
Robert Moore 44f6c01242 ACPICA 20050408 from Bob Moore
Fixed three cases in the interpreter where an "index"
argument to an ASL function was still (internally) 32
bits instead of the required 64 bits.  This was the Index
argument to the Index, Mid, and Match operators.

The "strupr" function is now permanently local
(acpi_ut_strupr), since this is not a POSIX-defined
function and not present in most kernel-level C
libraries. References to the C library strupr function
have been removed from the headers.

Completed the deployment of static
functions/prototypes. All prototypes with the static
attribute have been moved from the headers to the owning
C file.

ACPICA 20050329 from Bob Moore

An error is now generated if an attempt is made to create
a Buffer Field of length zero (A CreateField with a length
operand of zero.)

The interpreter now issues a warning whenever executable
code at the module level is detected during ACPI table
load. This will give some idea of the prevalence of this
type of code.

Implemented support for references to named objects (other
than control methods) within package objects.

Enhanced package object output for the debug
object. Package objects are now completely dumped, showing
all elements.

Enhanced miscellaneous object output for the debug
object. Any object can now be written to the debug object
(for example, a device object can be written, and the type
of the object will be displayed.)

The "static" qualifier has been added to all local
functions across the core subsystem.

The number of "long" lines (> 80 chars) within the source
has been significantly reduced, by about 1/3.

Cleaned up all header files to ensure that all CA/iASL
functions are prototyped (even static functions) and the
formatting is consistent.

Two new header files have been added, acopcode.h and
acnames.h.

Removed several obsolete functions that were no longer
used.

Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-12 00:08:52 -04:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00