Commit Graph

16 Commits

Author SHA1 Message Date
Greg Ungerer 9f5757476d [PATCH] m68knommu: startup code for the Drangen Engine 68328 based board
Specialized startup code for the 68328 based DragenEngine board.
It doesn't easily fit into the common 68x328 startup code framework.
It doesn't want any of the common hardware setup to be done here.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-12 20:04:15 -07:00
Greg Ungerer 81d4903d2d [PATCH] m68knommu: common RAM based 68360 startup code
Create common start code for all 68360 based platforms that are
loaded and run directly from RAM (as opposed to running from
flash/ROM). This replaces the old specific startup code for
each board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11 20:43:47 -07:00
Greg Ungerer 42ae766fff [PATCH] m68knommu: common ROM/flash based 68360 startup code
Create common start code for all 68360 based platforms that are
loaded and run directly from ROM/flash (as opposed to running from
RAM). This replaces the old specific startup code for each board.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-11 20:43:46 -07:00
Greg Ungerer 03981f2427 [PATCH] m68knommu: extract common timer code for 68EZ328 processor
Rework the 68x328 configuration and setup code. All 68x328 varients
share the same timer hardware. So extract that into its own file,
instead of keeping copies in each processors setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer 75003c4812 [PATCH] m68knommu: create common timer code for 68x328 processor varients
Create common timer code for all 68x328 processor varients.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer a79626604b [PATCH] m68knommu: register map setup for MOD5272 board
The boot loader on the MOD5272 board doesn't set the register maping,
so set it in the 5272 init code. There was code in there to support
this, but we had never needed to use it before.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer a052b7affc [PATCH] m68knommu: add timer support for the 523x ColdFire processor family
Add timer support for the ColdFire 523x processor family.
(It uses the ColdFire PIT timer hardware, so we just build that in).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:37 -07:00
Greg Ungerer ee721126ca [PATCH] m68knommu: extract common timer code for 68328 processor
Rework the 68x328 configuration and setup code. All 68x328 varient
share the same timer hardware, so extract that into its own file,
instead of keeping copies in each processors setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 8c2b58ce71 [PATCH] m68knommu: create common config code for all 68VZ328 platforms
Create common 68VZ328 config code. It is essentially the same for
all boards that use this, so no point having a version of it for
each.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 55f37debf7 [PATCH] m68knommu: remove DrangonEngine2 specific config code
Remove DragonEngine2 specific config code. Use common 68VZ328 config
code now.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 58201a2d03 [PATCH] m68knommu: remove uCdimm specific config code
Remove uCdimm specific config code. Use common 68VZ328 config code now.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:36 -07:00
Greg Ungerer 97591b2c76 [PATCH] m68knommu: 523x ColdFire processor init/config Makefile
Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-08 17:27:35 -07:00
Greg Ungerer 8410a54676 [PATCH] m68knommu: use THREAD_SIZE instead of hard coded size
Use the THREAD_SIZE define when manipulating the stack instead of
hard coded values (for the 68328 and 68360 sub-architectures).

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:30 -07:00
Greg Ungerer 029fc1375f [PATCH] m68knommu: fix ColdFire startup code to properly handle non 0 based ram
Correctly determine the end of ram for ram setups that do not
start at base address of 0. Add support for the MOD5272 board,
which doesn not have a ram base of 0.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:29 -07:00
Greg Ungerer b5aaf3f71c [PATCH] m68knommu: 523x ColdFire processor init code
Low level initialization code for the 523x ColdFire processor family.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-02 00:57:29 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00