Commit Graph

37 Commits

Author SHA1 Message Date
Hideo Saito bb68660943 sh: Fix PCI BAR address-space wraparound.
When a SH7751R system includes a card that has wide range space
like a graphics card, the pci-pci bridge controller can't set the
correct address range.

For example, when *lower_limit is 0xfd000000 and bar_size is
0x4000000, in the following code at arch/sh/drivers/pci/pci-auto.c,
0x0 is set in bar_value.

pciauto_setup_bars()
{
...
                bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size;
...
                *lower_limit = bar_value + bar_size;
}

As a result, 0x4000000 is set in *lower_limit, but this value is wrong.

The following patch avoids this problem by checking the range of the
value and refusing to update the BAR if the calculated value ends up
being bogus.

Signed-off-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-12 14:50:49 +09:00
Paul Mundt e65fa9f59e sh: Kill off dead bigsur and ec3104 boards.
Neither of these have had any maintenance in years, and there's
no interest in keeping them straggling along. These have already
been slated for removal some time, so finally just get rid of them.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-14 15:06:09 +09:00
Paul Mundt 401e9093a3 sh: Compile fix for heartbeat consolidation.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 15:46:39 +09:00
Paul Mundt 3b4d953962 sh: heartbeat consolidation for banked LEDs.
This consolidates the various board heartbeat LED implementations,
used for strobing the load average across a LED bank. Those boards
not implementing a full bank can hook in via the LED class.

We leave the compat hook in the machvec for now until those non-banked
boards are able to migrate to the drivers/leds.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 15:42:28 +09:00
Manuel Lauss 9f8a5e3a44 sh: SH-DMAC compile fixes
This patch does the following:
- remove the make_ipr_irq stuff from dma-sh.c and replace it
  with a simple channel<->irq mapping table.
- add DMTEx_IRQ constants for sh4 cpus
- fix sh7751 DMAE irq number

The SH7780 uses the same IRQs for DMA as other SH4 types, so
I put the constants on top of the dma.h file.

Other CPU types need to #define their own DMTEx_IRQ contants
in their appropriate header.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt fce3a24e70 sh: push-switch fixups for work_struct API damage.
INIT_WORK() dropped the data arg, so now we have to stash an extra
pointer and backpedal instead.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Jamie Lenehan ea0f8feaa0 sh: sh775x/titan fixes for irq header changes.
The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 12:05:02 +09:00
Mark Glaisher db9b99d461 sh: dma-api channel capability extensions.
This extends the SH DMA API for allowing handling of DMA
channels based off of their respective capabilities.

A couple of functions are added to the existing API,
the core bits are register_chan_caps() for registering
channel capabilities, and request_dma_bycap() for fetching
a channel dynamically based off of a capability set.

Signed-off-by: Mark Glaisher <mark.glaisher@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt e803aaf63a sh: Drop name overload in dma-sh.
Pass along the dev_id from request_dma() all the way down,
rather than inserting an artificial name relating to the TEI
line that we were doing before.

This makes the line a bit less obvious, but dev_id is the proper
behaviour for this regardless.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt 49f860bb5d sh: Make dma-isa depend on ISA_DMA_API.
Previously we linked in the ISA DMA wrapper unconditionally.
As there are very few users of this, it's better to make it
conditional.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt 4dfc119f1c sh: dma-sysfs fixes.
Handle the case where no registered DMACs exist somewhat more
gracefully. While we're at it, check for sysdev_create_file()
failing.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:39 +09:00
Paul Mundt 9f5e8eee5c sh: generic push-switch framework.
This adds support for a generic push switch framework. Adaptable for
various switches, including GPIO switches and the push switches commonly
found on Renesas debug boards.

This allows switch states to be trivially reported through sysfs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Paul Mundt 9a7ef6d59f sh: Drop CPU subtype IRQ headers.
This drops the various IRQ headers that were floating around
and primarily providing hardcoded IRQ definitions for the
various CPU subtypes. This quickly got to be an unmaintainable
mess, made even more evident by the subtle breakage introduced
by the SH-2 and SH-2A changes.

Now that subtypes are able to register IRQ maps directly, just
rip all of the headers out.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Jamie Lenehan bd71ab88de sh: Fix IPR-IRQ's for IRQ-chip change breakage.
The conversion from IPR-IRQ to IRQ-chip resulted in the
ipr data being allocated in a local variable in
make_ipr_irq - breaking anything using IPR interrupts.

This changes all of the callers of make_ipr_irq to
allocate a static structure containing the IPR data which
is then passed to make_ipr_irq. This removes the need for
make_ipr_irq to allocate any additional space for the IPR
information.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-31 12:53:28 +09:00
Paul Mundt 082c44d20e sh: Cleanup board header directories.
Now with the ide.h mess sorted out, most of these boards
don't need their own directory. Move the headers out, and
update the driver paths.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:32 +09:00
Jamie Lenehan 580410005d sh: Fix pr_debug statements for sh4
Fix a problem uncovered by the recent change to always check the
arguments to pr_debug. The sh7751 was using the wrong name for the
PCI IO base address.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:36:15 +09:00
Paul Mundt 35f3c5185b sh: Updates for IRQ handler changes.
Trivial fixes for build breakage introduced by IRQ handler changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:31:16 +09:00
Uwe Zeisberger f30c226954 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-03 23:01:26 +02:00
Paul Mundt 2914d4da17 sh: Kill off remaining config.h references.
A few of these managed to sneak back in, get rid of them once
and for all.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:19:02 +09:00
Paul Mundt 711fa80968 sh: build fixes for defconfigs.
Get all of the defconfigs building again.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-03 13:14:04 +09:00
Paul Mundt 0f08f33808 sh: More cosmetic cleanups and trivial fixes.
Nothing exciting here, just trivial fixes..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:03:56 +09:00
Paul Mundt 9e3043c091 sh: Fixup TEI IRQ requests in request_dma().
If a channel is not TEI capable, don't try to request_irq()..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:55:24 +09:00
Paul Mundt e2d1864da5 sh: G2 DMA IRQ and residue sampling.
This fixes a long-standing FIXME for G2 DMA, where we finally
wire up the IRQ handler and allow for sampling remaining bytes
while in-flight.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:53:40 +09:00
Paul Mundt a3e61d50dc sh: Inhibit mapping PCI apertures through page tables.
Inhibit mapping through page tables in __ioremap() for PCI memory
apertures on SH7751 and SH7780-style PCI controllers, translation is
not possible for these areas. For other users that map a small window
in P1/P2 space, ioremap() traps that already, and should never make
it to __ioremap().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:45:22 +09:00
Paul Mundt 959f85f8a3 sh: Consolidated SH7751/SH7780 PCI support.
This cleans up quite a lot of the PCI mess that we
currently have, and attempts to consolidate the
duplication in the SH7780 and SH7751 PCI controllers.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:43:28 +09:00
Paul Mundt 5283ecb5cc sh: Add support for R7780RP and R7780MP boards.
This adds support for the Renesas SH7780 development boards,
R7780RP and R7780MP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:59:17 +09:00
Paul Mundt d7cdc9e8ac sh: ioremap() overhaul.
ioremap() overhaul. Add support for transparent PMB mapping, get rid of
p3_ioremap(), etc. Also drop ioremap() and iounmap() routines from the
machvec, as everyone can use the generic ioremap() API instead. For PCI
memory apertures and other special cases, use the pci_iomap() API, as
boards are already required to get the mapping right there.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:16:42 +09:00
Jamie Lenehan a09749dd86 sh: Titan board support.
Add support for the titan board.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 15:05:39 +09:00
Paul Mundt e4c2cfee5d sh: Various cosmetic cleanups.
We had quite a bit of whitespace damage, clean most of it up..

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 12:31:01 +09:00
Thomas Gleixner 6d20819f80 [PATCH] irq-flags: SH: Use the new IRQF_ constants
Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:48 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Greg Kroah-Hartman e31dd6e452 [PATCH] 64bit resource: change pci core and arch code to use resource_size_t
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Paul Mundt 0d831770b1 [PATCH] sh: DMA updates
This extends the current SH DMA API somewhat to support a proper virtual
channel abstraction, and also works to represent this through the driver model
by giving each DMAC its own platform device.

There's also a few other minor changes to support a few new CPU subtypes, and
make TEI generation for the SH DMAC configurable.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-16 23:15:27 -08:00
Paul Mundt d5cb978353 [PATCH] sh: SuperHyway support for SH4-202
This adds support for the relatively quirky (ie, not in line with any known
documentation, and amazed it works at all) SuperHyway implementation on
SH4-202.  This depends on the earlier SuperHyway patch for multiple block
support and VCR refactoring.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:28 -08:00
Tim Schmielau 4e57b68178 [PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.

In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch.  This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other.  So if any
hunk rejects or gets in the way of other patches, just drop it.  My scripts
will pick it up again in the next round.

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 17:37:32 -08:00
Al Viro 6dae2c2306 [PATCH] gfp_t: dma-mapping (sh)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:48 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00