Commit Graph

69 Commits

Author SHA1 Message Date
Russell King e9ccb79927 [ARM] Merge AT91 and devel branches
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-13 22:44:15 +00:00
Andrew Victor 8df12925a0 [ARM] 4011/1: AT91SAM9260: Fix compilation with NAND driver
Add missing include for NAND device support on AT91SAM9260.

Signed-off-by: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-08 15:42:05 +00:00
Andrew Victor 44853a81ed [ARM] 4010/1: AT91SAM9260-EK board: Prepare for MACB Ethernet support
Add PHY IRQ pin definition for AT91SAM9260-EK board.

Signed-off-by: Wojtek Kaniewski <wojtekka@toxygen.net>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-08 15:42:04 +00:00
Russell King 6705cda24f [ARM] Merge individual ARM sub-trees
Merge:
 Atmel AT91RM9200 and AT91SAM9260 changes
 General ARM developments
 Disconfiguous memory cleanups
 64-bit/32-bit division and sched_clock extension patches
 EP93xx support changes
 IOP support changes

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-07 23:07:26 +00:00
Andrew Victor c019d49b69 [ARM] 3972/1: AT91: Update board.h
Replace the 'is_b' variable with 'slot_b' in at91_mmc_data.
Also add the new 'chipselect' variable for CF/PCMCIA and 'bus_width_16'
variable for NAND.

This (and previous patches) will unfortunately break the current MMC,
USB Gadget and PCMCIA drivers.  Updates and fixes for those drivers will
be submitted to the various subsystem maintainers.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-04 14:37:34 +00:00
Andrew Victor 69c5eccd16 [ARM] 3966/1: AT91: RM9200 device data update
This patch contains various updates the at91rm9200_devices.c file:
      * Consistent naming of resources and platform_devices.
      * PCMCIA/Compact Flash: Configuration of the memory controller
        moved out of the driver and into this file.
      * MMC: Enable the VCC pin (if one is configured)
      * MMC: Enable the internal pullups on the I/O pins.
      * NAND: Configuration of the memory controller moved out of the
        driver and into this file.
      * Added TWI/I2C resources.
      * The names of some of the CONFIG_ variables were changed.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 16:56:44 +00:00
Andrew Victor 58a0cd7887 [ARM] 3963/1: AT91: Update configuration files
A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT91.  That way we don't
need to mention every specific AT91 processor explicitly.

Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK
boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 16:56:43 +00:00
Andrew Victor 022cbd7376 [ARM] 3961/2: AT91: Support for Atmel AT91SAM9261-EK board
This patch adds support for the Atmel AT91SAM9261-EK board.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 16:56:41 +00:00
Andrew Victor b85a891403 [ARM] 3962/1: AT91: Support for Atmel AT91SAM9260-EK board
This patch adds support for the Atmel AT91SAM9260-EK board.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 16:56:40 +00:00
Andrew Victor 05043d0804 [ARM] 3960/1: AT91: Final SAM9 intergration patches.
This patch includes a number of small changes for integrating the
AT91SAM9261 and AT91SAM0260 support.

      * Can only select support for one AT91 processor at a time.
      * Remove most of the remaining static memory mapping for the
        AT91RM9200.
      * Reserve 1Mb of memory below the IO for mapping the internal SRAM
        and any custom board-specific devices (ie, FPGA).
      * The SAM9260 has more serial ports, so increase the maximum to 7.
      * Define the standard chipselect addresses, and define other
        addresses relative to those.
      * CLOCK_TICK_RATE is different on the SAM926x's.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:54:05 +00:00
Andrew Victor d481f86449 [ARM] 3959/1: AT91: Support for SAM9 USB and HCK clocks
The bits used to select the USB clocks are different on the SAM9's.
Add support for the HCK clocks on the AT91SAM9261.

Patch from Patrice Vilchez & Nicolas Ferre

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:54:00 +00:00
Andrew Victor fcc63716a5 [ARM] 3957/1: AT91: Physically mapped flash on DK and EK boards
This patch converts the old CONFIG_MTD_PHYSMAP_ options to the new
physmap API by creating a physmap platform device for the NOR flash
found on the Atmel AT91RM9200-DK and AT91RM9200-EK boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:53:58 +00:00
Andrew Victor 330d741b06 [ARM] 3956/1: AT91: Carmeva board update
This patch updates the Carmeva board support:
      * Specify the MMC Write-protect and Detection pins.
      * Add configuration of SPI devices.

Patch from Peer Georgi.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:53:57 +00:00
Andrew Victor d100f25956 [ARM] 3955/1: AT91: Clear timer interrupt when resuming
Attached is a patch for at91rm9200_time.c which removes
the 'BUG: soft lockup detected on CPU#0!' message when
exiting suspended states.

Patch from Savin Zlobec

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:53:55 +00:00
Andrew Victor 86ad76bb2d [ARM] 3953/1: AT91: SAM9 platform devices
This patch includes the pin initialization, resource definition and
registration of the platform_devices for the SAM9260 and SAM9261
processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:53:53 +00:00
Andrew Victor 1a0ed732af [ARM] 3949/2: AT91: SAM9 timer driver
Add support for the timer on the Atmel AT91SAM9261 and AT91SAM9260
processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:53:50 +00:00
Andrew Victor 55d8baee4a [ARM] 3954/1: AT91: Update drivers for new headers
This patch updates the drivers (and other files) which include the
hardware headers.  This fixes the breakage introduced in patches 3950/1
and 3951/1 (those patches were getting big).

The AVR32 architecture uses the same serial driver and had its own copy
of at91rm9200_pdc.h.  Renamed it to at91_pdc.h

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 22:51:40 +00:00
Andrew Victor 62c1660d90 [ARM] 3948/1: AT91: Initial support for AT91SAM9261 and AT91SAM9260
This patch adds the initial support for the newer Atmel AT91SAM9261 and
AT91SAM9260 processors.  The code is based on, and makes use of, the
existing AT91RM9200 support.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 22:51:38 +00:00
Andrew Victor 1f4fd0a0d2 [ARM] 3946/1: AT91: at91_arch_reset and at91_extern_irq
The external interrupt sources are different on the various AT91
processors.  This patch introduces the global 'at91_extern_irq' variable
that contains a bitset of the available external interrupt sources.

The processor reset mechanism also differs on the various AT91
processors.  This patch also adds a global 'at91_arch_reset' callback
(from system.h) into the processor-specific code to perform the reset.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 22:51:36 +00:00
Andrew Victor 20127f6863 [ARM] 3945/1: AT91: Rename devices.c
This patch renames the arch/arm/mach-at91rm9200/devices.c file to
at91rm9200_devices.c.  The file contains AT91RM9200-specific code, so we
will need separate files for the SAM9 processors.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 22:51:33 +00:00
Russell King 10dd5ce28d [ARM] Remove compatibility layer for ARM irqs
set_irq_chipdata -> set_irq_chip_data
get_irq_chipdata -> get_irq_chip_data
do_level_IRQ -> handle_level_irq
do_edge_IRQ -> handle_edge_irq
do_simple_IRQ -> handle_simple_irq
irqdesc -> irq_desc
irqchip -> irq_chip

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30 12:24:47 +00:00
Linus Torvalds 0cd61b68c3 Initial blind fixup for arm for irq changes
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00
Haavard Skinnemoen 75d3521377 [PATCH] atmel_serial: Pass fixed register mappings through platform_data
In order to initialize the serial console early, the atmel_serial
driver had to do a hack where it compared the physical address of the
port with an address known to be permanently mapped, and used it as a
virtual address. This got around the limitation that ioremap() isn't
always available when the console is being initalized.

This patch removes that hack and replaces it with a new "regs" field
in struct atmel_uart_data that the board-specific code can initialize
to a fixed virtual mapping for platform devices where this is possible.
It also initializes the DBGU's regs field with the address the driver
used to check against.

On AVR32, the "regs" field is initialized from the physical base
address when this it can be accessed through a permanently 1:1 mapped
segment, i.e. the P4 segment.

If regs is NULL, the console initialization is delayed until the "real"
driver is up and running and ioremap() can be used.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen 73e2798b0f [PATCH] at91_serial -> atmel_serial: Public definitions
Rename the following public definitions:
  * AT91_NR_UART -> ATMEL_MAX_UART
  * struct at91_uart_data -> struct atmel_uart_data
  * at91_default_console_device -> atmel_default_console_device

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen 1e8ea80219 [PATCH] at91_serial -> atmel_serial: Platform device name
Rename the "at91_usart" platform driver "atmel_usart" and update
platform devices accordingly.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Haavard Skinnemoen 749c4e6033 [PATCH] at91_serial -> atmel_serial: Kconfig symbols
Rename the following Kconfig symbols:
  * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL
  * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE
  * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 10:25:05 -07:00
Dave Jones 038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00
Andrew Victor 1f51c10c5e [ARM] 3870/1: AT91: Start removing static memory mappings
This patch removes the static memory mapping for the currently-unused
peripherals [Synchronous Serial, Timer/Counter unit], and for those
drivers that already ioremap() their registers [UART].

Also, the Ethernet driver now uses the platform_device resources but
doesn't yet use ioremap() so we need to pass it the virtual address
instead of the physical address.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 18:11:22 +01:00
Andrew Victor cc2b28ba61 [ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
This patch adds support for the NAND flash on the Atmel AT91RM9200-DK
and KwikByte KB920x boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:53:55 +01:00
Andrew Victor f21738341c [ARM] 3867/1: AT91 GPIO update
This patch makes the AT91 gpio.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The GPIO controllers supported by a particular AT91
processor are defined in the processor-specific file and are registered
with gpio.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:53:47 +01:00
Andrew Victor 2eeaaa21de [ARM] 3866/1: AT91 clock update
This patch makes the AT91 clock.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The clocks supported by a particular AT91 processor
are defined in the processor-specific file and are registered with
clock.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:52:06 +01:00
Andrew Victor 72729910c3 [ARM] 3865/1: AT91RM9200 header updates
This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-28 11:52:05 +01:00
David Brownell 38c677cb9a [ARM] 3739/1: genirq updates: irq_chip, add and use irq_chip.name
Patch from David Brownell

ARM genirq cleanups/updates:

    - Start switching platforms to newer APIs
        * use "irq_chip" name, not "irqchip"
        * providing irq_chip.name

    - Show irq_chip.name in /proc/interrupts, like on x86.

This update a bit more than half of the ARM code.  The irq_chip.name
values were chosen to match docs (if I have them) or be otherwise
obvious ("FPGA", "CPLD", or matching the code).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-01 22:26:25 +01:00
Andrew Victor ba854e1841 [ARM] 3711/1: AT91 timer update
Patch from Andrew Victor

The AIC interrupt controller is the same on the Atmel AT91RM9200,
AT91SAM9261 and AT91SAM9260 processors.

This patch removes any RM9200-specific naming from the IRQ driver, and
moves the AT91RM9200's default IRQ priority table into at91rm9200.c.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-05 17:22:52 +01:00
Thomas Gleixner 52e405eaa9 [PATCH] ARM: fixup irqflags breakage after ARM genirq merge
The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 17:29:22 -07:00
Linus Torvalds b4b9034132 Merge branch 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'genirq' of master.kernel.org:/home/rmk/linux-2.6-arm: (24 commits)
  [ARM] 3683/2:  ARM: Convert at91rm9200 to generic irq handling
  [ARM] 3682/2:  ARM: Convert ixp4xx to generic irq handling
  [ARM] 3702/1: ARM: Convert ixp23xx to generic irq handling
  [ARM] 3701/1: ARM: Convert plat-omap to generic irq handling
  [ARM] 3700/1: ARM: Convert lh7a40x to generic irq handling
  [ARM] 3699/1: ARM: Convert s3c2410 to generic irq handling
  [ARM] 3698/1: ARM: Convert sa1100 to generic irq handling
  [ARM] 3697/1: ARM: Convert shark to generic irq handling
  [ARM] 3696/1: ARM: Convert clps711x to generic irq handling
  [ARM] 3694/1: ARM: Convert ecard driver to generic irq handling
  [ARM] 3693/1: ARM: Convert omap1 to generic irq handling
  [ARM] 3691/1: ARM: Convert imx to generic irq handling
  [ARM] 3688/1: ARM: Convert clps7500 to generic irq handling
  [ARM] 3687/1: ARM: Convert integrator to generic irq handling
  [ARM] 3685/1: ARM: Convert pxa to generic irq handling
  [ARM] 3684/1: ARM: Convert l7200 to generic irq handling
  [ARM] 3681/1: ARM: Convert ixp2000 to generic irq handling
  [ARM] 3680/1: ARM: Convert footbridge to generic irq handling
  [ARM] 3695/1: ARM drivers/pcmcia: Fixup includes
  [ARM] 3689/1: ARM drivers/input/touchscreen: Fixup includes
  ...

Manual conflict resolved in kernel/irq/handle.c (butt-ugly ARM tickless
code).
2006-07-02 15:07:45 -07:00
Linus Torvalds a8c4c20dfa Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...
2006-07-02 15:04:12 -07:00
Thomas Gleixner 07d265dd59 [ARM] 3683/2: ARM: Convert at91rm9200 to generic irq handling
Patch from Thomas Gleixner

From: Thomas Gleixner <tglx@linutronix.de>

Fixup the conversion to generic irq subsystem.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 23:01:50 +01:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Andrew Victor 8fc5ffa063 [ARM] 3675/2: Preparing for AT91SAM926 support
Patch from Andrew Victor

This prepares the way for adding support for the new Atmel AT91SAM926x
processors.

Major changes:
- Rename time.c to at91rm9200_time.c
- Rename common.c to at91rm9200.c
- Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and
ARCH_AT91SAM9261 are dependent.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 16:06:33 +01:00
Lennert Buytenhek b184a4c9a4 [ARM] 3654/1: add ajeco 1arm sbc support
Patch from Lennert Buytenhek

This patch adds support for the Ajeco 1ARM Single Board Computer, a
VME form factor SBC based on the Atmel AT91 SoC, with 64M RAM, seven
serial ports, three ethernet ports, IDE, CF, USB host and device,
and S-Video/VGA out.--

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26 17:48:29 +01:00
Russell King ea75ee9ab8 [ARM] Include asm/hardware.h not asm/arch/hardware.h
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:53:16 +01:00
Andrew Victor 55c20c0af7 [ARM] 3599/1: AT91RM9200 remove global variables
Patch from Andrew Victor

This patch removes some now unnecessary global variables -
at91_master_clock, at91_serial_map, at91_console_port.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:31:39 +01:00
Andrew Victor 5c3fddced9 [ARM] 3607/1: AT91RM9200 misc fixes
Patch from Andrew Victor

This final patch includes some general fixes.

1. Link in pm.o if CONFIG_PM is enabled.  [Should have been included in
patch 3605/1].
2. Use __raw_readl()/__raw_writel() when accessing System Peripheral
registers.
3. Removed some unnecessary includes

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:30:20 +01:00
Andrew Victor 907d6deb62 [ARM] 3605/1: AT91RM9200 Power Management
Patch from Andrew Victor

This patch adds the core Power Management support for the AT91RM9200
processor.  It will support suspend-to-RAM and standby modes.

The suspend-to-RAM functionality is not 100% complete.  The code that
needs to be execute from the internal SRAM to restore the system is
outstanding.  For now we just fall through to Standby mode.

The AT91-specific at91_suspend_entering_slow_clock() function will
eventually be replaced by clk_must_disable() once that functionality is
added to mainline clock API.

Patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:30:19 +01:00
Andrew Victor 6902f523a3 [ARM] 3604/1: AT91RM9200 New boards
Patch from Andrew Victor

This patch adds support for an additional 4 AT91RM9200-based boards:

1. Conitec ARM&EVA  [MACH_CARMEVA]
   (http://www.conitec.net/english/linuxboard.htm)

2. KwikByte KB920x  [MACH_KB9200]
   (http://kwikbyte.com/KB9202_description_new.htm)

3. Embest ATEB9200  [MACH_ATEB9200]
   (http://www.embedinfo.com/english/product/ATEB9200.asp)

4. Sperry-Sun KAFA board  [MACH_KAFA]
   (unknown)

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:30:18 +01:00
Andrew Victor 067bbada4c [ARM] 3589/1: AT91RM9200 DK/EK board update
Patch from Andrew Victor

This patch updates the support for the Atmel DK and EK boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The USB Device pullup line is connected to reset, so multidrive needs
to be enabled on the line.  [Patch from David Brownell].

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 18:16:45 +01:00
Andrew Victor 466e6227e6 [ARM] 3588/1: AT91RM9200 CSB337/637 board update
Patch from Andrew Victor

This patch updates the support for the Cogent CSB337 and CSB637 boards.

The changes include:
1. Use the new at91_uart_config structure and device registration
functions for the UARTs.
2. Registration of I2C and SPI platform devices.
3. The CSB337 board uses PB0 & PB1 (and not PB2) for the LEDs.  [Patch
from David Brownell]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 17:26:23 +01:00
Andrew Victor 2e83640270 [ARM] 3585/1: AT91RM9200 Platform devices
Patch from Andrew Victor

This patch updates the platform device support for the AT91RM9200.

The changes include:

1. USB Host device renamed to "at91_ohci" since the driver is also
usable on the AT91SAM9261 processor.
2. Enabling multidrive on the USB Device's pullup pin should not be done
for all boards.  Moved into board-specific files.  [Patch from David
Brownell]
3. Move enabling of PCMCIA/Compact Flash pins out of the driver.
4. Added SPI device and resources.
5. Added Watchdog device and resources.  [Patch from David Brownell]
6. Added UART device and resources.
7. The simple devices (watchdog, rtc, i2c) are now automatically
registered and don't have to be registered separately in each
board-specific file. [Patch from David Brownell]

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 16:31:55 +01:00
Andrew Victor 814138ffa4 [ARM] 3584/1: AT91RM9200 GPIO suspend/resume support
Patch from Andrew Victor

This patch adds suspend/resume/set_wake support for the AT91RM9200's
GPIO interrupts.

Original patch from David Brownell.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-19 15:26:54 +01:00