Commit Graph

40 Commits

Author SHA1 Message Date
Ralf Baechle 54d0a216f4 [MIPS] Replace board_timer_setup function pointer by plat_timer_setup.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2006-07-13 21:26:17 +01:00
Thiemo Seufer 5af1c7a4d4 [MIPS] BCM1480: Fix fatal typo in the rewritten interrupt handler.
Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13 21:26:05 +01:00
Thiemo Seufer 6e61e85b09 [MIPS] Sibyte: Improve interrupt latency again for sb1250/bcm1480
this patch restores the behaviour of the old (assembly-written)
interrupt handler, the handler is left as soon as a single interrupt
cause is handled.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13 21:26:05 +01:00
Ralf Baechle 94dee171df [MIPS] Eleminate interrupt migration helper use.
> #define hw_interrupt_type       irq_chip
> typedef struct irq_chip         hw_irq_controller;
> #define no_irq_type             no_irq_chip
> typedef struct irq_desc         irq_desc_t;

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-07-13 21:25:58 +01:00
Jon Smirl 894673ee61 [PATCH] tty: Remove include of screen_info.h from tty.h
screen_info.h doesn't have anything to do with the tty layer and shouldn't be
included by tty.h.  This patches removes the include and modifies all users to
directly include screen_info.h.  struct screen_info is mainly used to
communicate with the console drivers in drivers/video/console.  Note that this
patch touches every arch and I have no way of testing it.  If there is a
mistake the worst thing that will happen is a compile error.

[akpm@osdl.org: fix arm build]
[akpm@osdl.org: fix alpha build]
Signed-off-by: Jon Smirl <jonsmir@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds 8d231c11fd Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (33 commits)
  [MIPS] Add missing backslashes to macro definitions.
  [MIPS] Death list of board support to be removed after 2.6.18.
  [MIPS] Remove BSD and Sys V compat data types.
  [MIPS] ioc3.h: Uses u8, so include <linux/types.h>.
  [MIPS] 74K: Assume it will also have an AR bit in config7
  [MIPS] Treat CPUs with AR bit as physically indexed.
  [MIPS] Oprofile: Support VSMP on 34K.
  [MIPS] MIPS32/MIPS64 S-cache fix and cleanup
  [MIPS] excite: PCI makefile needs to use += if it wants a chance to work.
  [MIPS] excite: plat_setup -> plat_mem_setup.
  [MIPS] au1xxx: export dbdma functions
  [MIPS] au1xxx: dbdma, no sleeping under spin_lock
  [MIPS] au1xxx: fix PSC_SMBTXRX_RSR.
  [MIPS] Early printk for IP27.
  [MIPS] Fix handling of 0 length I & D caches.
  [MIPS] Typo fixes.
  [MIPS] MIPS32/MIPS64 secondary cache management
  [MIPS] Fix FIXADDR_TOP for TX39/TX49.
  [MIPS] Remove first timer interrupt setup in wrppmc_timer_setup()
  [MIPS] Fix configuration of R2 CPU features and multithreading.
  ...
2006-06-29 13:44:45 -07:00
Ralf Baechle e73ea273ef [MIPS] Fix build error: don't offer SMP on systems that don't have SMP.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-29 21:10:51 +01:00
Ingo Molnar d1bef4ed5f [PATCH] genirq: rename desc->handler to desc->chip
This patch-queue improves the generic IRQ layer to be truly generic, by adding
various abstractions and features to it, without impacting existing
functionality.

While the queue can be best described as "fix and improve everything in the
generic IRQ layer that we could think of", and thus it consists of many
smaller features and lots of cleanups, the one feature that stands out most is
the new 'irq chip' abstraction.

The irq-chip abstraction is about describing and coding and IRQ controller
driver by mapping its raw hardware capabilities [and quirks, if needed] in a
straightforward way, without having to think about "IRQ flow"
(level/edge/etc.) type of details.

This stands in contrast with the current 'irq-type' model of genirq
architectures, which 'mixes' raw hardware capabilities with 'flow' details.
The patchset supports both types of irq controller designs at once, and
converts i386 and x86_64 to the new irq-chip design.

As a bonus side-effect of the irq-chip approach, chained interrupt controllers
(master/slave PIC constructs, etc.) are now supported by design as well.

The end result of this patchset intends to be simpler architecture-level code
and more consolidation between architectures.

We reused many bits of code and many concepts from Russell King's ARM IRQ
layer, the merging of which was one of the motivations for this patchset.

This patch:

rename desc->handler to desc->chip.

Originally i did not want to do this, because it's a big patch.  But having
both "desc->handler", "desc->handle_irq" and "action->handler" caused a
large degree of confusion and made the code appear alot less clean than it
truly is.

I have also attempted a dual approach as well by introducing a
desc->chip alias - but that just wasnt robust enough and broke
frequently.

So lets get over with this quickly.  The conversion was done automatically
via scripts and converts all the code in the kernel.

This renaming patch is the first one amongst the patches, so that the
remaining patches can stay flexible and can be merged and split up
without having some big monolithic patch act as a merge barrier.

[akpm@osdl.org: build fix]
[akpm@osdl.org: another build fix]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Thiemo Seufer 4fb60a4b80 [MIPS] Random fixes for sb1250
Random improvements for sb1250: Silence compiler warnings, a bugfix for
the profiling code, and a comment typo.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:24 +01:00
Thiemo Seufer b75d4c1d68 [MIPS] Fix bcm1480 compile
Fix compilation for bcm1480, a hpt is only available on sb1250/bcm112x.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:24 +01:00
Ralf Baechle 2925aba422 [MIPS] Cleanup memory managment initialization.
Historically plat_mem_setup did the entire platform initialization.  This
was rather impractical because it meant plat_mem_setup had to get away
without any kind of memory allocator.  To keep old code from breaking
plat_setup was just renamed to plat_setup and a second platform
initialization hook for anything else was introduced.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:23 +01:00
[MIPS] James E Wilson e1701fb2e2 [PATCH] Fix BCM1480 doubled process accounting times.
Running a UP kernel on a bcm1480 board, I get nonsensical timing
results, like this:
release@unknown:~/tmp$ time ./a.out
real    0m22.906s
user    0m45.792s
sys     0m0.010s
According to my watch, this program took 23 seconds to run, so the real
time clock is OK.  It is process accounting that is broken.

I tracked this down to a problem with the function
bcm1480_timer_interrupt in the file sibyte/bcm1480/time.c.  This
function calls ll_timer_interrupt for cpu0, and ll_local_timer_interrupt
for all cpus.  However, both of these functions do process accounting.
Thus processes running on cpu0 end up with doubled times.  This is very
obvious in a UP kernel where all processes run on cpu0.

The correct way to do this is to only call ll_local_timer interrupt if
this is not cpu0.  This can be seen in the mips-board/generic/time.c
file, and also in the sibyte/sb1250/time.c file, both of which handle
this correctly.  I fixed the bcm1480/time.c file by copying over the
correct code from the sb1250/time.c file.

With this fix, I now get sensible results.
release@unknown:~/tmp$ time ./a.out
real    0m22.903s
user    0m22.894s
sys     0m0.006s

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:16 +01:00
Ralf Baechle e4ac58afdf [MIPS] Rewrite all the assembler interrupt handlers to C.
Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:21 +02:00
Yoichi Yuasa d23ee8fe6e [PATCH] mips: fixed collision of rtc function name
Fix the collision of rtc function name.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:44:50 -08:00
Ralf Baechle a904f74785 [MIPS] Sibyte: Fix race in sb1250_gettimeoffset().
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>:
    
sb1250_gettimeoffset() simply reads the current cpu 0 timer remaining
value, however once this counter reaches 0 and the interrupt is raised,
it immediately resets and begins to count down again.
    
If sb1250_gettimeoffset() is called on cpu 1 via do_gettimeofday() after
the timer has reset but prior to cpu 0 processing the interrupt and
taking write_seqlock() in timer_interrupt() it will return a full value
(or close to it) causing time to jump backwards 1ms. Once cpu 0 handles
the interrupt and timer_interrupt() gets far enough along it will jump
forward 1ms.
    
Fix this problem by implementing mips_hpt_*() on sb1250 using a spare
timer unrelated to the existing periodic interrupt timers. It runs at
1Mhz with a full 23bit counter.  This eliminated the custom
do_gettimeoffset() for sb1250 and allowed use of the generic
fixed_rate_gettimeoffset() using mips_hpt_*() and timerhi/timerlo.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18 16:59:30 +00:00
Ralf Baechle 4308cb1628 [MIPS] Sibyte: Fix interrupt timer off by one bug.
From Dave Johnson <djohnson+linuxmips@sw.starentnetworks.com>:
    
The timers need to be loaded with 1 less than the desired interval not
the interval itself.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-18 16:59:30 +00:00
Ralf Baechle 9b6695a8ad [MIPS] SMP: Fix initialization order bug.
A recent change requires cpu_possible_map to be initialized before
smp_sched_init() but most MIPS platforms were initializing their
processors in the prom_prepare_cpus callback of smp_prepare_cpus.  The
simple fix of calling prom_prepare_cpus from one of the earlier SMP
initialization hooks doesn't work well either since IPIs may require
init_IRQ() to have completed, so bit the bullet and split
prom_prepare_cpus into two initialization functions, plat_smp_setup
which is called early from setup_arch and plat_prepare_cpus called where
prom_prepare_cpus used to be called.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-27 17:30:36 +00:00
Martin Michlmayr 76e1daee7d [MIPS] Fix compiler warnings in arch/mips/sibyte/bcm1480/irq.c
Fix the following compiler warnings:
    
  CC      arch/mips/sibyte/bcm1480/irq.o
arch/mips/sibyte/bcm1480/irq.c: In function ‘bcm1480_set_affinity’:
arch/mips/sibyte/bcm1480/irq.c:168: warning: ISO C90 forbids mixed declarations and code
arch/mips/sibyte/bcm1480/irq.c: In function ‘ack_bcm1480_irq’:
arch/mips/sibyte/bcm1480/irq.c:230: warning: ISO C90 forbids mixed declarations and code
    
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-21 16:58:23 +00:00
Ralf Baechle 77607635c3 [MIPS] Sibyte: Config option names shouldn't be prefixed with CONFIG_
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-21 16:58:23 +00:00
Ralf Baechle b6f7880b6c [MIPS] Reformat to 80 columns.
Patch courtesy of Emily Postnews ;-)
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:23 +00:00
Ralf Baechle 5ac71fd1cf [MIPS] Sibyte: Make all setup functions __init.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:23 +00:00
Ralf Baechle fcdb27ad1d [MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:22 +00:00
Al Viro dc8f6029cd [PATCH] mips: task_thread_info()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12 09:08:59 -08:00
Atsushi Nemoto 53c2df2f4e Use rtc_lock to protect RTC operations
Many RTC routines were not protected against each other, so there are
potential races, for example, ntp-update against /dev/rtc.  This patch
fixes them using rtc_lock.
    
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-11-07 18:05:38 +00:00
Andrew Isaacson a4b5bd9abc SB1 cache exception handling.
Expand SB1 cache error handling by adding SB1_CEX_ALWAYS_FATAL and
SB1_CEX_STALL, allowing configurable behavior on cache errors.
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:48 +01:00
Andrew Isaacson f137e463b5 Add support for BCM1480 family of chips.
- Kconfig and Makefile changes
 - arch/mips/sibyte/bcm1480/
 - changes to sibyte common code to support 1480
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:47 +01:00
Ralf Baechle 6aaf7786ed No need to explicitly call __read_64bit_c0_split; __read_64bit_c0_register
will do that itself iff needed.  Fix format string.
    
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:33 +01:00
Andrew Isaacson 942d042d17 Use cpumask_t rather than hand-rolled bitmask code in sb1250_set_affinity.
Signed-Off-By: Andrew Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:32 +01:00
Ralf Baechle b288f13587 Switch Sibyte profiling driver to ->compat_ioctl
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:29 +01:00
Ralf Baechle a50b3e2763 Do the timer interrupt only once on CPU 0 ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:32:08 +01:00
Ralf Baechle ca4973dd55 Don't redeclare ll_local_timer_interrupt.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:36 +01:00
Ralf Baechle 8ab00b9a02 Convert struct hw_interrupt_type initializations to ISO C99 named
initializers.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:46 +01:00
Maciej W. Rozycki 65bda1a95d Switch SiByte drivers back to __raw_*() functions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:44 +01:00
Ralf Baechle 38b18f7258 Move Sibyte Kconfig stuff into it's own Kconfig.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:23 +01:00
Ralf Baechle db89a48c1f Replace deprecated interruptible_sleep_on() function call with direct
wait-queue usage.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:22 +01:00
Ralf Baechle c83cfc9c94 Get rid of early_init. There's more need to make this form of
initialization actually useful and as is certainly unmergable with
upstream.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:18 +01:00
Ralf Baechle 42a3b4f25a [PATCH] mips: nuke trailing whitespace
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:07 -07:00
Ralf Baechle 875d43e72b [PATCH] mips: clean up 32/64-bit configuration
Start cleaning 32-bit vs. 64-bit configuration.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:06 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00