Commit Graph

133 Commits

Author SHA1 Message Date
Pavel Roskin a1fdf6940a [POWERPC] Assign all PCI busses on G3 Blue & White
G3 Blue & White is misconfigured by default so that CardBus controllers
in PCI slots don't work.  The PCI bridge is programmed to only allow
access to bus 1 but not higher busses.

The patch forces the PCI busses to be reassigned if a Grackle controller
is found and the machine identifies itself as "PowerMac1,1"

Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:22 +11:00
Vitaly Bordug 73844ecbaa [POWERPC] cpm2: CPM2 interrupt controller fix
This contains important fixes for the CPM2 PIC code. Eliminated
CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt
mapping. Updated devicetree files to reflect that. Changed direct
IC-related IO accesses to the IO accessors. Fixed all the sense values to
keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs
and hence could be hardly usable.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:20 +11:00
Olof Johansson 7df2457db8 [POWERPC] MPIC: support more than 256 sources
Allow more than the default 256 MPIC sources. Allocates a new flag
(MPIC_LARGE_VECTORS) to be used by platform code when instantiating
the mpic.

I picked 11 bits worth right now since it would cover the number of
sources on any hardware I have seen. It can always be increased later
if needed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:19 +11:00
Vitaly Bordug f2a0bd3753 [POWERPC] 8xx: powerpc port of core CPM PIC
This covers common CPM access functions, CPM interrupt controller code,
micropatch and a few compatibility things to kee the same driver base
working with arch/ppc. This version is refined with all the comments
(mostly PIC-related) addressed.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Vitaly Bordug 88bdc6f061 [POWERPC] 8xx: platform related changes to the fsl_soc
Added 8xx SoC peripherials: fec for Ethernet and smc for UARTs.
Ordinary routines to extract values from the device tree and insert
respective platform devices

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:17 +11:00
Kumar Gala 8943212c97 [POWERPC] Remove fastcall function attribute
fastcall is an x86 specific function attribute and has no business in ppc code

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-26 01:52:27 -06:00
Kumar Gala 126186a055 [POWERPC] 83xx: Return a point to the struct ipic from ipic_init()
It's useful to have access to struct ipic handle that just got created
in ipic_init().

For example, if we want to setup an external IRQ with out
a device node we need access ipic->irqhost to create the virtual to HW
IRQ mapping and to set the IRQ sense.  With this we can mimic the old
sense array concept that existed in arch/ppc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-01-26 01:45:32 -06:00
Mariusz Kozlowski 06c3147564 [POWERPC] arch/powerpc/sysdev/cpm2_pic.c of_node_get cleanup
Remove redundant argument check for of_node_get().
It's ok to remove 'node' check because in real life cpm2_pic_init()
never gets called with node == NULL.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:57 +11:00
Mariusz Kozlowski a15d5eaa77 [POWERPC] arch/powerpc/sysdev/qe_lib of_node_get cleanup
No need for ?: as of_node_get() can handle NULL argument.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>

 arch/powerpc/sysdev/qe_lib/qe_ic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:57 +11:00
Mariusz Kozlowski c3bfc3a8dd [POWERPC] arch/powerpc/sysdev/mpic.c of_node_get cleanup
No need for ?: because of_node_get() can handle NULL argument.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:57 +11:00
Mariusz Kozlowski af337c096c [POWERPC] arch/powerpc/sysdev/ipic.c of_node_get cleanup
No need for ?: because of_node_get() can handle NULL argument.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24 21:13:57 +11:00
Benjamin Herrenschmidt 6984ee797a [POWERPC] Fix cell's mmio nvram to properly parse device tree
The mmio nvram driver (used by cell only atm) isn't properly parsing
the device-tree, meaning that nvram isn't found correctly on the new
Cell blades.  It works ok for old blades where the nvram is at the
root of the device tree but fails on Malta and CAB when it's hanging
off axon.  This fixes it by using the proper OF parsing functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-22 21:27:35 +11:00
Grant Likely 9b3a6f4ab9 [POWERPC] Don't include powerpc/sysdev/rom.o for arch/ppc builds
sysdev/rom.c is for arch/powerpc only.  Don't compile it when building
an arch/ppc kernel.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-09 17:03:02 +11:00
Michael Ellerman beb7cc8238 PCI: Only check the HT capability bits in mpic.c
Only compare the exact HT capability bits against HT_CAPTYPE_IRQ,
this is a little paranoid, but doesn't hurt.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-20 10:54:43 -08:00
Paul Mackerras 973c1fabc7 Merge branch 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc 2006-12-11 16:31:42 +11:00
Kumar Gala 45d8e7aaf4 [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set
On 85xx we don't build in dcr support because the core doesn't implement the
instructions.  This caused problems when building an 85xx kernel.  Additionally
made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE.

The 85xx build issue wasPointed out by Dai Haruki.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-10 23:15:47 -06:00
Benjamin Herrenschmidt 4383162c8f [POWERPC] Remove old dcr.S
When I renamed dcr.S to dcr_low.S (and added dcr.c) it looks like the
old dcr.S file didn't properly get removed.  This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-11 15:13:47 +11:00
Scott Wood 2c1d2f34a0 [POWERPC] qe_ic: Do a sync when masking interrupts
This patch causes a sync do be done after masking a QE interrupt, to
ensure that the masking has completed before interrupts are enabled.
This allows the masking of the cascade IRQ to be removed without causing
spurious interrupts.

The mask_and_ack function is also removed and set to the mask function,
as the two are identical.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 17:10:22 +11:00
Geoff Levand 885ed0fb48 [POWERPC] powerpc: fix build error in rom.c
Add missing include in rom.c.  Fixes this build error when CONFIG_MTD=y:

  arch/powerpc/sysdev/rom.c:26: error: implicit declaration of function
  of_platform_device_create

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 15:55:55 +11:00
Yan Burman f8485350c2 [POWERPC] Replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc.

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:42:09 +11:00
Grant Likely 39d074b2e4 [POWERPC] Move MPC52xx PIC driver into arch/powerpc/platforms/52xx
No other chips use this device, it belongs in a 52xx-specific path.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:36 +11:00
Vitaly Wool 28f9ec349a [POWERPC] Add of_platform support for ROM devices
This adds support for flash device descriptions to the OF device tree.
It's inspired by and partially borrowed from Sergei's patch "[RFC]
Adding MTD to device tree.patch".

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:24 +11:00
Grant Likely 4687522c0d [POWERPC] Don't compile arch/powerpc mpc52xx_pic driver for ARCH=ppc
arch/powerpc/sysdev/mpc52xx_pic.c breaks the ppc build

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:37 +11:00
Zang Roy-r61911 5873c9bdb0 [POWERPC] Make pci_read_irq_line the default on mpc7448hpc2 board
The following patch adds a tsi108/9 pci interrupt controller host.
On mpc7448hpc2 board, pci_irq_fixup function is removed, which makes the
pci_read_irq_line be the default pci irq fixup.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:27 +11:00
Jeremy Kerr 165785e5c0 [POWERPC] Cell iommu support
This patch adds full cell iommu support (and iommu disabled mode).

It implements mapping/unmapping of iommu pages on demand using the
standard powerpc iommu framework.  It also supports running with
iommu disabled for machines with less than 2GB of memory.  (The
default is off in that case, though it can be forced on with the
kernel command line option iommu=force).

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:02 +11:00
Benjamin Herrenschmidt 12d04eef92 [POWERPC] Refactor 64 bits DMA operations
This patch completely refactors DMA operations for 64 bits powerpc. 32 bits
is untouched for now.

We use the new dev_archdata structure to add the dma operations pointer
and associated data to struct device. While at it, we also add the OF node
pointer and numa node. In the future, we might want to look into merging
that with pci_dn as well.

The old vio, pci-iommu and pci-direct DMA ops are gone. They are now replaced
by a set of generic iommu and direct DMA ops (non PCI specific) that can be
used by bus types. The toplevel implementation is now inline.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:38:40 +11:00
Benjamin Herrenschmidt a959ff56bb [POWERPC] Improve MPIC driver auto-configuration from DT
This patch applies on top of the MPIC DCR support. It makes the MPIC
driver capable of a lot more auto-configuration based on the device-tree,
for example, it can retreive it's own physical address if not passed as
an argument, find out if it's DCR or MMIO mapped, and set the BIG_ENDIAN
flag automatically in the presence of a "big-endian" property in the
device-tree node.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:08:41 +11:00
Benjamin Herrenschmidt fbf0274e43 [POWERPC] Support for DCR based MPIC
This patch implements support for DCR based MPIC implementations. Such
implementations have the MPIC_USES_DCR flag set and don't use the phys_addr
argument of mpic_alloc (they require a valid dcr mapping in the device node)

This version of the patch can use a little bif of cleanup still (I can
probably consolidate rb->dbase/doff, at least once I'm sure on how the
hardware is actually supposed to work vs. possible simulator issues) and
it should be possible to build a DCR-only version of the driver. I need
to cleanup a bit the CONFIG_* handling for that and probably introduce
CONFIG_MPIC_MMIO and CONFIG_MPIC_DCR.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:08:35 +11:00
Benjamin Herrenschmidt 4c75a6f441 [POWERPC] Generic DCR infrastructure
This patch adds new dcr_map/dcr_read/dcr_write accessors for DCRs that
can be used by drivers to transparently address either native DCRs or
memory mapped DCRs. The implementation for memory mapped DCRs is done
after the binding being currently worked on for SLOF and the Axon
chipset. This patch enables it for the cell native platform

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:08:25 +11:00
Paul Mackerras 79acbb3ff2 Merge branch 'linux-2.6' into for-linus 2006-12-04 15:59:07 +11:00
Timur Tabi fc9e8b4e27 [PATCH] Optimize qe_brg struct to use an array
The qe_brg structure manually defined each of the 16 BRG registers, which
made any code that used them cumbersome.  This patch replaces the fields
with a single 16-element array.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13 14:49:01 +11:00
Andy Fleming a9b14973a8 [PATCH] Slight refactor of interrupt mapping for FSL parts
* Cleaned up interrupt mapping a little by adding a helper
  function which parses the irq out of the device-tree, and puts
  it into a resource.
* Changed the arch/ppc platform files to specify PHY_POLL, instead of -1
* Changed the fixed phy to use PHY_IGNORE_INTERRUPT
* Added ethtool.h and mii.h to phy.h includes

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13 14:48:52 +11:00
Nicolas DET 0f6c95dcab [PATCH] Add MPC5200 Interrupt Controller support.
This adds support for the MPC52xx Interrupt controller for
ARCH=powerpc.

It includes the main code in arch/powerpc/sysdev/ as well as a header
file in include/asm-powerpc.

Signed-off-by: Nicolas DET <nd@bplan-gmbh.de>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13 14:45:02 +11:00
Timur Tabi 302439d216 [POWERPC] qe_lib: qe_issue_cmd writes wrong value to CECDR
Changed qe_issue_cmd() to write cmd_input to the CECDR unmodified.  It
was treating cmd_input as a virtual address and tried to convert it to
a physical address.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01 14:52:48 +11:00
Linas Vepstas 5d2efba64b [POWERPC] Use 4kB iommu pages even on 64kB-page systems
The 10Gigabit ethernet device drivers appear to be able to chew
up all 256MB of TCE mappings on pSeries systems, as evidenced by
numerous error messages:

 iommu_alloc failed, tbl c0000000010d5c48 vaddr c0000000d875eff0 npages 1

Some experimentation indicates that this is essentially because
one 1500 byte ethernet MTU gets mapped as a 64K DMA region when
the large 64K pages are enabled. Thus, it doesn't take much to
exhaust all of the available DMA mappings for a high-speed card.

This patch changes the iommu allocator to work with its own
unique, distinct page size. Although the patch is long, its
actually quite simple: it just #defines a distinct IOMMU_PAGE_SIZE
and then uses this in all the places that matter.

As a side effect, it also dramatically improves network performance
on platforms with H-calls on iommu translation inserts/removes (since
we no longer call it 16 times for a 1500 bytes packet when the iommu HW
is still 4k).

In the future, we might want to make the IOMMU_PAGE_SIZE a variable
in the iommu_table instance, thus allowing support for different HW
page sizes in the iommu itself.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01 14:52:48 +11:00
Benjamin Herrenschmidt f4d4c354bc [POWERPC] Fix CHRP platforms with only 8259
On CHRP platforms with only a 8259 controller, we should set the
default IRQ host to the 8259 driver's one for the IRQ probing
fallbacks to work in case the IRQ tree is incorrect (like on
Pegasos for example). Without this fix, we get a bunch of WARN_ON's
during boot.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 13:49:22 +10:00
Scott Wood f49196a5f5 [POWERPC] IPIC: Fix spinlock recursion in set_irq_handler
This causes ipic_set_irq_type to set the handler directly rather
than call set_irq_handler, which causes spinlock recursion because
the lock is already held when ipic_set_irq_type is called.

I'm also not convinced that ipic_set_irq_type should be changing the
handler at all.  There seem to be several controllers that don't and
several that do.  Those that do would break what appears to be a common
usage of calling set_irq_chip_and_handler followed by set_irq_type, if a
non-standard handler were to be used.  OTOH, irq_create_of_mapping()
doesn't set the handler, but only calls set_irq_type().

This patch gets things working in the spinlock-debugging-enabled case,
but I'm curious as to where the handler setting is ideally supposed to be
done.  I don't see any documentation on set_irq_type() that clarifies
what the semantics are supposed to be.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 13:49:22 +10:00
Liu Dave-r63238 f84c39da76 [POWERPC] Fix the UCC rx/tx clock of QE
MPC8323EMDS board ethernet interface with RMII uses the CLK16 divisor
for the rx and tx clock, but the ucc_set_qe_mux_rxtx() function doesn't
handle the CLK16 setting of the CMXUCR3 and CMXUCR4 registers.  This
fixes it.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 13:49:22 +10:00
Timur Tabi aa7a32cbda [POWERPC] Fix spelling errors in ucc_fast.c and ucc_slow.c
In ucc_fast.c and ucc_slow.c, "illegal" is twice spelled "illagal".

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23 18:23:17 +10:00
Zang Roy-r61911 c3386e4014 [POWERPC] Fix compiler warning message on get_property call
This fixes the warning message from the return value of function
get_property(), by making sure that the variable that receives the
value is marked as const.

Signed-off-by: Roy Zang	<tie-fei.zang@freescale.com>

--
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23 18:20:12 +10:00
David Gibson 0f03a43b8f [POWERPC] Remove todc code from ARCH=powerpc
Apparently we've copied the todc drivers, for various RTCs used in
embedded machines from ARCH=ppc to ARCH=powerpc, despite the fact that
it's never used in the latter.  This patch removes it.

If we ever need these drivers (which we probably shouldn't now the RTC
class stuff is in), we can transfer them one by one from ARCH=ppc,
removing from the hideous abomination which is the todc
"infrastructure".

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-16 16:32:30 +10:00
Dave Jones b0ac3f50b8 [HEADERS] Put linux/config.h out of its misery.
Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-09 19:13:51 -04:00
Olaf Hering 35a84c2f56 [POWERPC] Fix up after irq changes
Remove struct pt_regs * from all handlers.
Also remove the regs argument from get_irq() functions.
Compile tested with arch/powerpc/config/* and
arch/ppc/configs/prep_defconfig

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-07 22:08:26 +10:00
Olof Johansson 2b00b254de [POWERPC] Fix fsl_soc build breaks
Hrm, there's no way this ever built at time of merge. There's a missing } and
the wrong type on phy_irq.

Also, another const for get_property().

  CC      arch/powerpc/sysdev/fsl_soc.o
arch/powerpc/sysdev/fsl_soc.c: In function 'fs_enet_of_init':
arch/powerpc/sysdev/fsl_soc.c:625: error: assignment of read-only variable 'phy_irq'
arch/powerpc/sysdev/fsl_soc.c:625: warning: assignment makes integer from pointer without a cast
arch/powerpc/sysdev/fsl_soc.c:661: warning: assignment discards qualifiers from pointer target type
arch/powerpc/sysdev/fsl_soc.c:684: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:687: error: subscripted value is neither array nor pointer
arch/powerpc/sysdev/fsl_soc.c:722: warning: ISO C90 forbids mixed declarations and code
arch/powerpc/sysdev/fsl_soc.c:728: error: invalid storage class for function 'cpm_uart_of_init'
arch/powerpc/sysdev/fsl_soc.c:798: error: initializer element is not constant
arch/powerpc/sysdev/fsl_soc.c:798: error: expected declaration or statement at end of input
make[1]: *** [arch/powerpc/sysdev/fsl_soc.o] Error 1

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-07 10:10:13 +10:00
Olof Johansson 49f19ce401 [PATCH] powerpc: irq change build breaks
Fix up some of the buildbreaks from the irq handler changes.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05 18:39:04 -07:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Linus Torvalds fefd26b3b8 Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/configh
* master.kernel.org:/pub/scm/linux/kernel/git/davej/configh:
  Remove all inclusions of <linux/config.h>

Manually resolved trivial path conflicts due to removed files in
the sound/oss/ subdirectory.
2006-10-04 09:59:57 -07:00
Linus Torvalds 13bbd8d906 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (25 commits)
  [POWERPC] Add support for the mpc832x mds board
  [POWERPC] Add initial support for the e300c2 core
  [POWERPC] Add MPC8360EMDS default dts file
  [POWERPC] Add MPC8360EMDS board support
  [POWERPC] Add QUICC Engine (QE) infrastructure
  [POWERPC] Add QE device tree node definition
  [POWERPC] Don't try to just continue if xmon has no input device
  [POWERPC] Fix a printk in pseries_mpic_init_IRQ
  [POWERPC] Get default baud rate in udbg_scc
  [POWERPC] Fix zImage.coff on oldworld PowerMac
  [POWERPC] Fix xmon=off and cleanup xmon initialisation
  [POWERPC] Cleanup include/asm-powerpc/xmon.h
  [POWERPC] Update swim3 printk after blkdev.h change
  [POWERPC] Cell interrupt rework
  POWERPC: mpc82xx merge: board-specific/platform stuff(resend)
  POWERPC: 8272ads merge to powerpc: common stuff
  POWERPC: Added devicetree for mpc8272ads board
  [POWERPC] iSeries has no legacy I/O
  [POWERPC] implement BEGIN/END_FW_FTR_SECTION
  [POWERPC] iSeries does not need pcibios_fixup_resources
  ...
2006-10-04 08:16:37 -07:00
Eric W. Biederman e78d01693b [PATCH] Add Hypertransport capability defines
This adds defines for the hypertransport capability subtypes and starts
using them a little.

[akpm@osdl.org: fix typo]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:29 -07:00
Dave Jones 038b0a6d8d Remove all inclusions of <linux/config.h>
kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones <davej@redhat.com>
2006-10-04 03:38:54 -04:00