diff --git a/CREDITS b/CREDITS index 8b4882024635..f33a33fd2371 100644 --- a/CREDITS +++ b/CREDITS @@ -666,11 +666,6 @@ S: Tamsui town, Taipei county, S: Taiwan 251 S: Republic of China -N: Reinette Chatre -E: reinette.chatre@intel.com -D: WiMedia Link Protocol implementation -D: UWB stack bits and pieces - N: Michael Elizabeth Chastain E: mec@shout.net D: Configure, Menuconfig, xconfig @@ -3023,12 +3018,6 @@ S: Demonstratsii 8-382 S: Tula 300000 S: Russia -N: Inaky Perez-Gonzalez -E: inaky.perez-gonzalez@intel.com -D: UWB stack, HWA-RC driver and HWA-HC drivers -D: Wireless USB additions to the USB stack -D: WiMedia Link Protocol bits and pieces - N: Gordon Peters E: GordPeters@smarttech.com D: Isochronous receive for IEEE 1394 driver (OHCI module). diff --git a/Documentation/ABI/testing/sysfs-bus-umc b/Documentation/ABI/testing/sysfs-bus-umc deleted file mode 100644 index 948fec412446..000000000000 --- a/Documentation/ABI/testing/sysfs-bus-umc +++ /dev/null @@ -1,28 +0,0 @@ -What: /sys/bus/umc/ -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - The Wireless Host Controller Interface (WHCI) - specification describes a PCI-based device with - multiple capabilities; the UWB Multi-interface - Controller (UMC). - - The umc bus presents each of the individual - capabilties as a device. - -What: /sys/bus/umc/devices/.../capability_id -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - The ID of this capability, with 0 being the radio - controller capability. - -What: /sys/bus/umc/devices/.../version -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - The specification version this capability's hardware - interface complies with. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index be663258b9b7..a44bfe020061 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -28,40 +28,6 @@ Description: drivers, non-authorized one are not. By default, wired USB devices are authorized. - Certified Wireless USB devices are not authorized - initially and should be (by writing 1) after the - device has been authenticated. - -What: /sys/bus/usb/device/.../wusb_cdid -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - For Certified Wireless USB devices only. - - A devices's CDID, as 16 space-separated hex octets. - -What: /sys/bus/usb/device/.../wusb_ck -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - For Certified Wireless USB devices only. - - Write the device's connection key (CK) to start the - authentication of the device. The CK is 16 - space-separated hex octets. - -What: /sys/bus/usb/device/.../wusb_disconnect -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - For Certified Wireless USB devices only. - - Write a 1 to force the device to disconnect - (equivalent to unplugging a wired USB device). - What: /sys/bus/usb/drivers/.../new_id Date: October 2011 Contact: linux-usb@vger.kernel.org diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc deleted file mode 100644 index a7ea169dc4eb..000000000000 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc +++ /dev/null @@ -1,156 +0,0 @@ -What: /sys/class/uwb_rc -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - Interfaces for WiMedia Ultra Wideband Common Radio - Platform (UWB) radio controllers. - - Familiarity with the ECMA-368 'High Rate Ultra - Wideband MAC and PHY Specification' is assumed. - -What: /sys/class/uwb_rc/beacon_timeout_ms -Date: July 2008 -KernelVersion: 2.6.27 -Description: - If no beacons are received from a device for at least - this time, the device will be considered to have gone - and it will be removed. The default is 3 superframes - (~197 ms) as required by the specification. - -What: /sys/class/uwb_rc/uwb/ -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - An individual UWB radio controller. - -What: /sys/class/uwb_rc/uwb/beacon -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - Write: - - - - to force a specific channel to be used when beaconing, - or, if is -1, to prohibit beaconing. If - is 0, then the default channel selection - algorithm will be used. Valid channels depends on the - radio controller's supported band groups. - - Reading returns the currently active channel, or -1 if - the radio controller is not beaconing. - -What: /sys/class/uwb_rc/uwb/ASIE -Date: August 2014 -KernelVersion: 3.18 -Contact: linux-usb@vger.kernel.org -Description: - - The application-specific information element (ASIE) - included in this device's beacon, in space separated - hex octets. - - Reading returns the current ASIE. Writing replaces - the current ASIE with the one written. - -What: /sys/class/uwb_rc/uwb/scan -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - Write: - - [] - - to start (or stop) scanning on a channel. is one of: - - == ======================================= - 0 scan - 1 scan outside BP - 2 scan while inactive - 3 scanning disabled - 4 scan (with start time of ) - == ======================================= - -What: /sys/class/uwb_rc/uwb/mac_address -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - The EUI-48, in colon-separated hex octets, for this - radio controller. A write will change the radio - controller's EUI-48 but only do so while the device is - not beaconing or scanning. - -What: /sys/class/uwb_rc/uwb/wusbhc -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - A symlink to the device (if any) of the WUSB Host - Controller PAL using this radio controller. - -What: /sys/class/uwb_rc/uwb// -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - A neighbour UWB device that has either been detected - as part of a scan or is a member of the radio - controllers beacon group. - -What: /sys/class/uwb_rc/uwb//BPST -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - The time (using the radio controllers internal 1 ms - interval superframe timer) of the last beacon from - this device was received. - -What: /sys/class/uwb_rc/uwb//DevAddr -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - The current DevAddr of this device in colon separated - hex octets. - -What: /sys/class/uwb_rc/uwb//EUI_48 -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - - The EUI-48 of this device in colon separated hex - octets. - -What: /sys/class/uwb_rc/uwb//IEs -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - The latest IEs included in this device's beacon, in - space separated hex octets with one IE per line. - -What: /sys/class/uwb_rc/uwb//LQE -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - Link Quality Estimate - the Signal to Noise Ratio - (SNR) of all packets received from this device in dB. - This gives an estimate on a suitable PHY rate. Refer - to [ECMA-368] section 13.3 for more details. - -What: /sys/class/uwb_rc/uwb//RSSI -Date: July 2008 -KernelVersion: 2.6.27 -Contact: linux-usb@vger.kernel.org -Description: - Received Signal Strength Indication - the strength of - the received signal in dB. LQE is a more useful - measure of the radio link quality. diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc deleted file mode 100644 index 55eb55cac92e..000000000000 --- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc +++ /dev/null @@ -1,57 +0,0 @@ -What: /sys/class/uwb_rc/uwb/wusbhc/wusb_chid -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - Write the CHID (16 space-separated hex octets) for this host controller. - This starts the host controller, allowing it to accept connection from - WUSB devices. - - Set an all zero CHID to stop the host controller. - -What: /sys/class/uwb_rc/uwb/wusbhc/wusb_trust_timeout -Date: July 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - Devices that haven't sent a WUSB packet to the host - within 'wusb_trust_timeout' ms are considered to have - disconnected and are removed. The default value of - 4000 ms is the value required by the WUSB - specification. - - Since this relates to security (specifically, the - lifetime of PTKs and GTKs) it should not be changed - from the default. - -What: /sys/class/uwb_rc/uwb/wusbhc/wusb_phy_rate -Date: August 2009 -KernelVersion: 2.6.32 -Contact: David Vrabel -Description: - The maximum PHY rate to use for all connected devices. - This is only of limited use for testing and - development as the hardware's automatic rate - adaptation is better then this simple control. - - Refer to [ECMA-368] section 10.3.1.1 for the value to - use. - -What: /sys/class/uwb_rc/uwb/wusbhc/wusb_dnts -Date: June 2013 -KernelVersion: 3.11 -Contact: Thomas Pugliese -Description: - The device notification time slot (DNTS) count and inverval in - milliseconds that the WUSB host should use. This controls how - often the devices will have the opportunity to send - notifications to the host. - -What: /sys/class/uwb_rc/uwb/wusbhc/wusb_retry_count -Date: June 2013 -KernelVersion: 3.11 -Contact: Thomas Pugliese -Description: - The number of retries that the WUSB host should attempt - before reporting an error for a bus transaction. The range of - valid values is [0..15], where 0 indicates infinite retries. diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf deleted file mode 100644 index 2969d3694ec0..000000000000 --- a/Documentation/ABI/testing/sysfs-wusb_cbaf +++ /dev/null @@ -1,101 +0,0 @@ -What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_* -Date: August 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - Various files for managing Cable Based Association of - (wireless) USB devices. - - The sequence of operations should be: - - 1. Device is plugged in. - - 2. The connection manager (CM) sees a device with CBA capability. - (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE). - - 3. The CM writes the host name, supported band groups, - and the CHID (host ID) into the wusb_host_name, - wusb_host_band_groups and wusb_chid files. These - get sent to the device and the CDID (if any) for - this host is requested. - - 4. The CM can verify that the device's supported band - groups (wusb_device_band_groups) are compatible - with the host. - - 5. The CM reads the wusb_cdid file. - - 6. The CM looks it up its database. - - - If it has a matching CHID,CDID entry, the device - has been authorized before and nothing further - needs to be done. - - - If the CDID is zero (or the CM doesn't find a - matching CDID in its database), the device is - assumed to be not known. The CM may associate - the host with device by: writing a randomly - generated CDID to wusb_cdid and then a random CK - to wusb_ck (this uploads the new CC to the - device). - - CMD may choose to prompt the user before - associating with a new device. - - 7. Device is unplugged. - - References: - [WUSB-AM] - Association Models Supplement to the - Certified Wireless Universal Serial Bus - Specification, version 1.0. - -What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_chid -Date: August 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - The CHID of the host formatted as 16 space-separated - hex octets. - - Writes fetches device's supported band groups and the - the CDID for any existing association with this host. - -What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name -Date: August 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - A friendly name for the host as a UTF-8 encoded string. - -What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_band_groups -Date: August 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - The band groups supported by the host, in the format - defined in [WUSB-AM]. - -What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_device_band_groups -Date: August 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - The band groups supported by the device, in the format - defined in [WUSB-AM]. - -What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_cdid -Date: August 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - The device's CDID formatted as 16 space-separated hex - octets. - -What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_ck -Date: August 2008 -KernelVersion: 2.6.27 -Contact: David Vrabel -Description: - Write 16 space-separated random, hex octets to - associate with the device. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index a1457995fd41..29fbb38ca759 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -6607,7 +6607,7 @@ usbcore.authorized_default= [USB] Default USB device authorization: - (default -1 = authorized except for wireless USB, + (default -1 = authorized (same as 1), 0 = not authorized, 1 = authorized, 2 = authorized if device connected to internal port) diff --git a/Documentation/driver-api/usb/usb.rst b/Documentation/driver-api/usb/usb.rst index 0fcd75ee5897..fb41768696ec 100644 --- a/Documentation/driver-api/usb/usb.rst +++ b/Documentation/driver-api/usb/usb.rst @@ -777,8 +777,7 @@ Speed may be: ======= ====================================================== 1.5 Mbit/s for low speed USB 12 Mbit/s for full speed USB - 480 Mbit/s for high speed USB (added for USB 2.0); - also used for Wireless USB, which has no fixed speed + 480 Mbit/s for high speed USB (added for USB 2.0) 5000 Mbit/s for SuperSpeed USB (added for USB 3.0) ======= ====================================================== diff --git a/Documentation/usb/authorization.rst b/Documentation/usb/authorization.rst index 9e53909d04c2..150a14970e95 100644 --- a/Documentation/usb/authorization.rst +++ b/Documentation/usb/authorization.rst @@ -33,12 +33,9 @@ Remove the lock down:: $ echo 1 > /sys/bus/usb/devices/usbX/authorized_default -By default, Wired USB devices are authorized by default to -connect. Wireless USB hosts deauthorize by default all new connected -devices (this is so because we need to do an authentication phase -before authorizing). Writing "2" to the authorized_default attribute -causes kernel to only authorize by default devices connected to internal -USB ports. +By default, all USB devices are authorized. Writing "2" to the +authorized_default attribute causes the kernel to authorize by default +only devices connected to internal USB ports. Example system lockdown (lame)