From dd9e329af7236e34c566d3705ea32a63069b9b13 Mon Sep 17 00:00:00 2001 From: Frieder Schrempf Date: Wed, 3 May 2023 18:33:07 +0200 Subject: [PATCH] drm/bridge: ti-sn65dsi83: Fix enable/disable flow to meet spec The datasheet describes the following initialization flow including minimum delay times between each step: 1. DSI data lanes need to be in LP-11 and the clock lane in HS mode 2. toggle EN signal 3. initialize registers 4. enable PLL 5. soft reset 6. enable DSI stream 7. check error status register To meet this requirement we need to make sure the host bridge's pre_enable() is called first by using the pre_enable_prev_first flag. Furthermore we need to split enable() into pre_enable() which covers steps 2-5 from above and enable() which covers step 7 and is called after the host bridge's enable(). Signed-off-by: Frieder Schrempf Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Tested-by: Alexander Stein #TQMa8MxML/MBa8Mx Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230503163313.2640898-3-frieder@fris.de --- drivers/gpu/drm/bridge/ti-sn65dsi83.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c index 1f5c07989e2b..6e125ba4f0d7 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c @@ -321,8 +321,8 @@ static u8 sn65dsi83_get_dsi_div(struct sn65dsi83 *ctx) return dsi_div - 1; } -static void sn65dsi83_atomic_enable(struct drm_bridge *bridge, - struct drm_bridge_state *old_bridge_state) +static void sn65dsi83_atomic_pre_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) { struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge); struct drm_atomic_state *state = old_bridge_state->base.state; @@ -485,11 +485,22 @@ static void sn65dsi83_atomic_enable(struct drm_bridge *bridge, /* Trigger reset after CSR register update. */ regmap_write(ctx->regmap, REG_RC_RESET, REG_RC_RESET_SOFT_RESET); + /* Wait for 10ms after soft reset as specified in datasheet */ + usleep_range(10000, 12000); +} + +static void sn65dsi83_atomic_enable(struct drm_bridge *bridge, + struct drm_bridge_state *old_bridge_state) +{ + struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge); + unsigned int pval; + /* Clear all errors that got asserted during initialization. */ regmap_read(ctx->regmap, REG_IRQ_STAT, &pval); regmap_write(ctx->regmap, REG_IRQ_STAT, pval); - usleep_range(10000, 12000); + /* Wait for 1ms and check for errors in status register */ + usleep_range(1000, 1100); regmap_read(ctx->regmap, REG_IRQ_STAT, &pval); if (pval) dev_err(ctx->dev, "Unexpected link status 0x%02x\n", pval); @@ -556,6 +567,7 @@ static const struct drm_bridge_funcs sn65dsi83_funcs = { .attach = sn65dsi83_attach, .detach = sn65dsi83_detach, .atomic_enable = sn65dsi83_atomic_enable, + .atomic_pre_enable = sn65dsi83_atomic_pre_enable, .atomic_disable = sn65dsi83_atomic_disable, .mode_valid = sn65dsi83_mode_valid, @@ -698,6 +710,7 @@ static int sn65dsi83_probe(struct i2c_client *client) ctx->bridge.funcs = &sn65dsi83_funcs; ctx->bridge.of_node = dev->of_node; + ctx->bridge.pre_enable_prev_first = true; drm_bridge_add(&ctx->bridge); ret = sn65dsi83_host_attach(ctx);