ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted

[ Upstream commit 32cf0046a6 ]

There's an issue on SAI synchronous mode that TX/RX side can't get BCLK
from RX/TX it sync with if BYP bit is asserted. It's a workaround to
fix it that enable SION of IOMUX pad control and assert BCI.

For example if TX sync with RX which means both TX and RX are using clk
form RX and BYP=1. TX can get BCLK only if the following two conditions
are valid:
1. SION of RX BCLK IOMUX pad is set to 1
2. BCI of TX is set to 1

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230530103012.3448838-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Chancel Liu 2023-05-30 18:30:12 +08:00 committed by Greg Kroah-Hartman
parent 570583c625
commit cfa01235b5
2 changed files with 10 additions and 2 deletions

View File

@ -491,14 +491,21 @@ static int fsl_sai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
regmap_update_bits(sai->regmap, reg, FSL_SAI_CR2_MSEL_MASK,
FSL_SAI_CR2_MSEL(sai->mclk_id[tx]));
if (savediv == 1)
if (savediv == 1) {
regmap_update_bits(sai->regmap, reg,
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
FSL_SAI_CR2_BYP);
else
if (fsl_sai_dir_is_synced(sai, adir))
regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
FSL_SAI_CR2_BCI, FSL_SAI_CR2_BCI);
else
regmap_update_bits(sai->regmap, FSL_SAI_xCR2(tx, ofs),
FSL_SAI_CR2_BCI, 0);
} else {
regmap_update_bits(sai->regmap, reg,
FSL_SAI_CR2_DIV_MASK | FSL_SAI_CR2_BYP,
savediv / 2 - 1);
}
if (sai->soc_data->max_register >= FSL_SAI_MCTL) {
/* SAI is in master mode at this point, so enable MCLK */

View File

@ -116,6 +116,7 @@
/* SAI Transmit and Receive Configuration 2 Register */
#define FSL_SAI_CR2_SYNC BIT(30)
#define FSL_SAI_CR2_BCI BIT(28)
#define FSL_SAI_CR2_MSEL_MASK (0x3 << 26)
#define FSL_SAI_CR2_MSEL_BUS 0
#define FSL_SAI_CR2_MSEL_MCLK1 BIT(26)