diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 07fe0f6fdfe3..12a256c0ef4c 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -15,19 +15,19 @@
 #define SPINOR_OP_RD_ANY_REG			0x65	/* Read any register */
 #define SPINOR_OP_WR_ANY_REG			0x71	/* Write any register */
 #define SPINOR_REG_CYPRESS_CFR1V		0x00800002
-#define SPINOR_REG_CYPRESS_CFR1V_QUAD_EN	BIT(1)	/* Quad Enable */
+#define SPINOR_REG_CYPRESS_CFR1_QUAD_EN		BIT(1)	/* Quad Enable */
 #define SPINOR_REG_CYPRESS_CFR2V		0x00800003
-#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24	0xb
+#define SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24	0xb
 #define SPINOR_REG_CYPRESS_CFR3V		0x00800004
-#define SPINOR_REG_CYPRESS_CFR3V_PGSZ		BIT(4) /* Page size. */
+#define SPINOR_REG_CYPRESS_CFR3_PGSZ		BIT(4) /* Page size. */
 #define SPINOR_REG_CYPRESS_CFR5V		0x00800006
 #define SPINOR_REG_CYPRESS_CFR5_BIT6		BIT(6)
 #define SPINOR_REG_CYPRESS_CFR5_DDR		BIT(1)
 #define SPINOR_REG_CYPRESS_CFR5_OPI		BIT(0)
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN				\
+#define SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN				\
 	(SPINOR_REG_CYPRESS_CFR5_BIT6 |	SPINOR_REG_CYPRESS_CFR5_DDR |	\
 	 SPINOR_REG_CYPRESS_CFR5_OPI)
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS	SPINOR_REG_CYPRESS_CFR5_BIT6
+#define SPINOR_REG_CYPRESS_CFR5_OCT_DTR_DS	SPINOR_REG_CYPRESS_CFR5_BIT6
 #define SPINOR_OP_CYPRESS_RD_FAST		0xee
 
 /* Cypress SPI NOR flash operations. */
@@ -57,7 +57,7 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	u8 addr_mode_nbytes = nor->params->addr_mode_nbytes;
 
 	/* Use 24 dummy cycles for memory array reads. */
-	*buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_11_24;
+	*buf = SPINOR_REG_CYPRESS_CFR2_MEMLAT_11_24;
 	op = (struct spi_mem_op)
 		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
 					  SPINOR_REG_CYPRESS_CFR2V, 1, buf);
@@ -69,7 +69,7 @@ static int cypress_nor_octal_dtr_en(struct spi_nor *nor)
 	nor->read_dummy = 24;
 
 	/* Set the octal and DTR enable bits. */
-	buf[0] = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN;
+	buf[0] = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_EN;
 	op = (struct spi_mem_op)
 		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
 					  SPINOR_REG_CYPRESS_CFR5V, 1, buf);
@@ -103,7 +103,7 @@ static int cypress_nor_octal_dtr_dis(struct spi_nor *nor)
 	 * in 8D-8D-8D mode. Since there is no register at the next location,
 	 * just initialize the value to 0 and let the transaction go on.
 	 */
-	buf[0] = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS;
+	buf[0] = SPINOR_REG_CYPRESS_CFR5_OCT_DTR_DS;
 	buf[1] = 0;
 	op = (struct spi_mem_op)
 		CYPRESS_NOR_WR_ANY_REG_OP(nor->addr_nbytes,
@@ -155,11 +155,11 @@ static int cypress_nor_quad_enable_volatile(struct spi_nor *nor)
 	if (ret)
 		return ret;
 
-	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1V_QUAD_EN)
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR1_QUAD_EN)
 		return 0;
 
 	/* Update the Quad Enable bit. */
-	nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1V_QUAD_EN;
+	nor->bouncebuf[0] |= SPINOR_REG_CYPRESS_CFR1_QUAD_EN;
 	op = (struct spi_mem_op)
 		CYPRESS_NOR_WR_ANY_REG_OP(addr_mode_nbytes,
 					  SPINOR_REG_CYPRESS_CFR1V, 1,
@@ -210,7 +210,7 @@ static int cypress_nor_set_page_size(struct spi_nor *nor)
 	if (ret)
 		return ret;
 
-	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3V_PGSZ)
+	if (nor->bouncebuf[0] & SPINOR_REG_CYPRESS_CFR3_PGSZ)
 		nor->params->page_size = 512;
 	else
 		nor->params->page_size = 256;