spi: rspi: Fill in controller speed limits
Fill in the controller speed limits, so the SPI core can use them for validating SPI transfers, and adjusting them where needed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200819125904.20938-8-geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
cb58825414
commit
c31979747b
|
@ -243,6 +243,8 @@ struct spi_ops {
|
|||
int (*transfer_one)(struct spi_controller *ctlr,
|
||||
struct spi_device *spi, struct spi_transfer *xfer);
|
||||
u16 extra_mode_bits;
|
||||
u16 min_div;
|
||||
u16 max_div;
|
||||
u16 flags;
|
||||
u16 fifo_size;
|
||||
u8 num_hw_ss;
|
||||
|
@ -1181,6 +1183,8 @@ static int rspi_remove(struct platform_device *pdev)
|
|||
static const struct spi_ops rspi_ops = {
|
||||
.set_config_register = rspi_set_config_register,
|
||||
.transfer_one = rspi_transfer_one,
|
||||
.min_div = 2,
|
||||
.max_div = 4096,
|
||||
.flags = SPI_CONTROLLER_MUST_TX,
|
||||
.fifo_size = 8,
|
||||
.num_hw_ss = 2,
|
||||
|
@ -1189,6 +1193,8 @@ static const struct spi_ops rspi_ops = {
|
|||
static const struct spi_ops rspi_rz_ops = {
|
||||
.set_config_register = rspi_rz_set_config_register,
|
||||
.transfer_one = rspi_rz_transfer_one,
|
||||
.min_div = 2,
|
||||
.max_div = 4096,
|
||||
.flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
|
||||
.fifo_size = 8, /* 8 for TX, 32 for RX */
|
||||
.num_hw_ss = 1,
|
||||
|
@ -1199,6 +1205,8 @@ static const struct spi_ops qspi_ops = {
|
|||
.transfer_one = qspi_transfer_one,
|
||||
.extra_mode_bits = SPI_TX_DUAL | SPI_TX_QUAD |
|
||||
SPI_RX_DUAL | SPI_RX_QUAD,
|
||||
.min_div = 1,
|
||||
.max_div = 4080,
|
||||
.flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX,
|
||||
.fifo_size = 32,
|
||||
.num_hw_ss = 1,
|
||||
|
@ -1260,6 +1268,7 @@ static int rspi_probe(struct platform_device *pdev)
|
|||
int ret;
|
||||
const struct rspi_plat_data *rspi_pd;
|
||||
const struct spi_ops *ops;
|
||||
unsigned long clksrc;
|
||||
|
||||
ctlr = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data));
|
||||
if (ctlr == NULL)
|
||||
|
@ -1312,6 +1321,9 @@ static int rspi_probe(struct platform_device *pdev)
|
|||
ctlr->unprepare_message = rspi_unprepare_message;
|
||||
ctlr->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST |
|
||||
SPI_LOOP | ops->extra_mode_bits;
|
||||
clksrc = clk_get_rate(rspi->clk);
|
||||
ctlr->min_speed_hz = DIV_ROUND_UP(clksrc, ops->max_div);
|
||||
ctlr->max_speed_hz = DIV_ROUND_UP(clksrc, ops->min_div);
|
||||
ctlr->flags = ops->flags;
|
||||
ctlr->dev.of_node = pdev->dev.of_node;
|
||||
ctlr->use_gpio_descriptors = true;
|
||||
|
|
Loading…
Reference in New Issue