diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index cbe0f96ca342..d777f713d522 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1047,6 +1047,16 @@ config REGULATOR_RT5033 RT5033 PMIC. The device supports multiple regulators like current source, LDO and Buck. +config REGULATOR_RT5120 + tristate "Richtek RT5120 PMIC Regulators" + depends on MFD_RT5120 + help + This adds support for voltage regulator in Richtek RT5120 PMIC. + It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN + to control external power source. Only BUCK1 is adjustable from + 600mV to 1395mV, per step 6.250mV. The others are all fixed voltage + by external hardware circuit. + config REGULATOR_RT5190A tristate "Richtek RT5190A PMIC" depends on I2C diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 8d3ee8b6d41d..b74ca8ff9f71 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -126,6 +126,7 @@ obj-$(CONFIG_REGULATOR_ROHM) += rohm-regulator.o obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o +obj-$(CONFIG_REGULATOR_RT5120) += rt5120-regulator.o obj-$(CONFIG_REGULATOR_RT5190A) += rt5190a-regulator.o obj-$(CONFIG_REGULATOR_RT5759) += rt5759-regulator.o obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o diff --git a/drivers/regulator/rt5120-regulator.c b/drivers/regulator/rt5120-regulator.c new file mode 100644 index 000000000000..8173ede09414 --- /dev/null +++ b/drivers/regulator/rt5120-regulator.c @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RT5120_REG_PGSTAT 0x03 +#define RT5120_REG_CH1VID 0x06 +#define RT5120_REG_CH1SLPVID 0x07 +#define RT5120_REG_ENABLE 0x08 +#define RT5120_REG_MODECTL 0x09 +#define RT5120_REG_UVOVPROT 0x0A +#define RT5120_REG_SLPCTL 0x0C +#define RT5120_REG_INTSTAT 0x1E +#define RT5120_REG_DISCHG 0x1F + +#define RT5120_OUTPG_MASK(rid) BIT(rid + 1) +#define RT5120_OUTUV_MASK(rid) BIT(rid + 9) +#define RT5120_OUTOV_MASK(rid) BIT(rid + 16) +#define RT5120_CH1VID_MASK GENMASK(6, 0) +#define RT5120_RIDEN_MASK(rid) BIT(rid + 1) +#define RT5120_RADEN_MASK(rid) BIT(rid) +#define RT5120_FPWM_MASK(rid) BIT(rid + 1) +#define RT5120_UVHICCUP_MASK BIT(1) +#define RT5120_OVHICCUP_MASK BIT(0) +#define RT5120_HOTDIE_MASK BIT(1) + +#define RT5120_BUCK1_MINUV 600000 +#define RT5120_BUCK1_MAXUV 1393750 +#define RT5120_BUCK1_STEPUV 6250 +#define RT5120_BUCK1_NUM_VOLT 0x80 + +#define RT5120_AUTO_MODE 0 +#define RT5120_FPWM_MODE 1 + +enum { + RT5120_REGULATOR_BUCK1 = 0, + RT5120_REGULATOR_BUCK2, + RT5120_REGULATOR_BUCK3, + RT5120_REGULATOR_BUCK4, + RT5120_REGULATOR_LDO, + RT5120_REGULATOR_EXTEN, + RT5120_MAX_REGULATOR +}; + +struct rt5120_priv { + struct device *dev; + struct regmap *regmap; + struct regulator_desc rdesc[RT5120_MAX_REGULATOR]; +}; + +static int rt5120_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int rid = rdev_get_id(rdev); + unsigned int mask = RT5120_FPWM_MASK(rid), val; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + val = 0; + break; + case REGULATOR_MODE_FAST: + val = RT5120_FPWM_MASK(rid); + break; + default: + return -EINVAL; + } + + return regmap_update_bits(regmap, RT5120_REG_MODECTL, mask, val); +} + +static unsigned int rt5120_buck_get_mode(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int ret, rid = rdev_get_id(rdev); + unsigned int val; + + ret = regmap_read(regmap, RT5120_REG_MODECTL, &val); + if (ret) + return REGULATOR_MODE_INVALID; + + if (val & RT5120_FPWM_MASK(rid)) + return REGULATOR_MODE_FAST; + + return REGULATOR_MODE_NORMAL; +} + +static int rt5120_regulator_get_error_flags(struct regulator_dev *rdev, + unsigned int *flags) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + unsigned int stat, hd_stat, cur_flags = 0; + int rid = rdev_get_id(rdev), ret; + + /* + * reg 0x03/0x04/0x05 to indicate PG/UV/OV + * use block read to descrease I/O xfer time + */ + ret = regmap_raw_read(regmap, RT5120_REG_PGSTAT, &stat, 3); + if (ret) + return ret; + + ret = regmap_read(regmap, RT5120_REG_INTSTAT, &hd_stat); + if (ret) + return ret; + + if (!(stat & RT5120_OUTPG_MASK(rid))) { + if (stat & RT5120_OUTUV_MASK(rid)) + cur_flags |= REGULATOR_ERROR_UNDER_VOLTAGE; + + if (stat & RT5120_OUTOV_MASK(rid)) + cur_flags |= REGULATOR_ERROR_REGULATION_OUT; + } + + if (hd_stat & RT5120_HOTDIE_MASK) + cur_flags |= REGULATOR_ERROR_OVER_TEMP; + + *flags = cur_flags; + return 0; +} + +static int rt5120_buck1_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int sel; + + if (uV < RT5120_BUCK1_MINUV || uV > RT5120_BUCK1_MAXUV) + return -EINVAL; + + sel = (uV - RT5120_BUCK1_MINUV) / RT5120_BUCK1_STEPUV; + return regmap_write(regmap, RT5120_REG_CH1SLPVID, sel); +} + +static int rt5120_regulator_set_suspend_enable(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int rid = rdev_get_id(rdev); + unsigned int mask = RT5120_RIDEN_MASK(rid); + + return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, mask); +} + +static int rt5120_regulator_set_suspend_disable(struct regulator_dev *rdev) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int rid = rdev_get_id(rdev); + unsigned int mask = RT5120_RIDEN_MASK(rid); + + return regmap_update_bits(regmap, RT5120_REG_SLPCTL, mask, 0); +} + +static const struct regulator_ops rt5120_buck1_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_mode = rt5120_buck_set_mode, + .get_mode = rt5120_buck_get_mode, + .get_error_flags = rt5120_regulator_get_error_flags, + .set_suspend_voltage = rt5120_buck1_set_suspend_voltage, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static const struct regulator_ops rt5120_buck234_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_mode = rt5120_buck_set_mode, + .get_mode = rt5120_buck_get_mode, + .get_error_flags = rt5120_regulator_get_error_flags, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static const struct regulator_ops rt5120_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .get_error_flags = rt5120_regulator_get_error_flags, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static const struct regulator_ops rt5120_exten_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_suspend_enable = rt5120_regulator_set_suspend_enable, + .set_suspend_disable = rt5120_regulator_set_suspend_disable, +}; + +static unsigned int rt5120_buck_of_map_mode(unsigned int mode) +{ + switch (mode) { + case RT5120_AUTO_MODE: + return REGULATOR_MODE_NORMAL; + case RT5120_FPWM_MODE: + return REGULATOR_MODE_FAST; + default: + return REGULATOR_MODE_INVALID; + } +} + +static void rt5120_fillin_regulator_desc(struct regulator_desc *desc, int rid) +{ + static const char * const name[] = { + "buck1", "buck2", "buck3", "buck4", "ldo", "exten" }; + static const char * const sname[] = { + "vin1", "vin2", "vin3", "vin4", "vinldo", NULL }; + + /* Common regulator property */ + desc->name = name[rid]; + desc->supply_name = sname[rid]; + desc->owner = THIS_MODULE; + desc->type = REGULATOR_VOLTAGE; + desc->id = rid; + desc->enable_reg = RT5120_REG_ENABLE; + desc->enable_mask = RT5120_RIDEN_MASK(rid); + desc->active_discharge_reg = RT5120_REG_DISCHG; + desc->active_discharge_mask = RT5120_RADEN_MASK(rid); + desc->active_discharge_on = RT5120_RADEN_MASK(rid); + /* Config n_voltages to 1 for all*/ + desc->n_voltages = 1; + + /* Only buck support mode change */ + if (rid >= RT5120_REGULATOR_BUCK1 && rid <= RT5120_REGULATOR_BUCK4) + desc->of_map_mode = rt5120_buck_of_map_mode; + + /* RID specific property init */ + switch (rid) { + case RT5120_REGULATOR_BUCK1: + /* Only buck1 support voltage change by I2C */ + desc->n_voltages = RT5120_BUCK1_NUM_VOLT; + desc->min_uV = RT5120_BUCK1_MINUV; + desc->uV_step = RT5120_BUCK1_STEPUV; + desc->vsel_reg = RT5120_REG_CH1VID, + desc->vsel_mask = RT5120_CH1VID_MASK, + desc->ops = &rt5120_buck1_ops; + break; + case RT5120_REGULATOR_BUCK2 ... RT5120_REGULATOR_BUCK4: + desc->ops = &rt5120_buck234_ops; + break; + case RT5120_REGULATOR_LDO: + desc->ops = &rt5120_ldo_ops; + break; + default: + desc->ops = &rt5120_exten_ops; + } +} + +static int rt5120_of_parse_cb(struct rt5120_priv *priv, int rid, + struct of_regulator_match *match) +{ + struct regulator_desc *desc = priv->rdesc + rid; + struct regulator_init_data *init_data = match->init_data; + + if (!init_data || rid == RT5120_REGULATOR_BUCK1) + return 0; + + if (init_data->constraints.min_uV != init_data->constraints.max_uV) { + dev_err(priv->dev, "Variable voltage for fixed regulator\n"); + return -EINVAL; + } + + desc->fixed_uV = init_data->constraints.min_uV; + return 0; +} + +static struct of_regulator_match rt5120_regu_match[RT5120_MAX_REGULATOR] = { + [RT5120_REGULATOR_BUCK1] = { .name = "buck1", }, + [RT5120_REGULATOR_BUCK2] = { .name = "buck2", }, + [RT5120_REGULATOR_BUCK3] = { .name = "buck3", }, + [RT5120_REGULATOR_BUCK4] = { .name = "buck4", }, + [RT5120_REGULATOR_LDO] = { .name = "ldo", }, + [RT5120_REGULATOR_EXTEN] = { .name = "exten", } +}; + +static int rt5120_parse_regulator_dt_data(struct rt5120_priv *priv) +{ + struct device *dev = priv->dev->parent; + struct device_node *reg_node; + int i, ret; + + for (i = 0; i < RT5120_MAX_REGULATOR; i++) { + rt5120_fillin_regulator_desc(priv->rdesc + i, i); + + rt5120_regu_match[i].desc = priv->rdesc + i; + } + + reg_node = of_get_child_by_name(dev->of_node, "regulators"); + if (!reg_node) { + dev_err(priv->dev, "Couldn't find 'regulators' node\n"); + return -ENODEV; + } + + ret = of_regulator_match(priv->dev, reg_node, rt5120_regu_match, + ARRAY_SIZE(rt5120_regu_match)); + + of_node_put(reg_node); + + if (ret < 0) { + dev_err(priv->dev, + "Error parsing regulator init data (%d)\n", ret); + return ret; + } + + for (i = 0; i < RT5120_MAX_REGULATOR; i++) { + ret = rt5120_of_parse_cb(priv, i, rt5120_regu_match + i); + if (ret) { + dev_err(priv->dev, "Failed in [%d] of_passe_cb\n", i); + return ret; + } + } + + return 0; +} + +static int rt5120_device_property_init(struct rt5120_priv *priv) +{ + struct device *dev = priv->dev->parent; + struct device_node *np = dev->of_node; + bool prot_enable; + unsigned int prot_enable_val = 0; + + /* Assign UV/OV HW protection behavior */ + prot_enable = of_property_read_bool(np, + "richtek,enable-undervolt-hiccup"); + if (prot_enable) + prot_enable_val |= RT5120_UVHICCUP_MASK; + + prot_enable = of_property_read_bool(np, + "richtek,enable-overvolt-hiccup"); + if (prot_enable) + prot_enable_val |= RT5120_OVHICCUP_MASK; + + return regmap_update_bits(priv->regmap, RT5120_REG_UVOVPROT, + RT5120_UVHICCUP_MASK | RT5120_OVHICCUP_MASK, + prot_enable_val); +} + +static int rt5120_regulator_probe(struct platform_device *pdev) +{ + struct rt5120_priv *priv; + struct regulator_dev *rdev; + struct regulator_config config = {}; + int i, ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = &pdev->dev; + + priv->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!priv->regmap) { + dev_err(&pdev->dev, "Failed to init regmap\n"); + return -ENODEV; + } + + ret = rt5120_device_property_init(priv); + if (ret) { + dev_err(&pdev->dev, "Failed to do property init\n"); + return ret; + } + + ret = rt5120_parse_regulator_dt_data(priv); + if (ret) { + dev_err(&pdev->dev, "Failed to parse dt data\n"); + return ret; + } + + config.dev = &pdev->dev; + config.regmap = priv->regmap; + + for (i = 0; i < RT5120_MAX_REGULATOR; i++) { + config.of_node = rt5120_regu_match[i].of_node; + config.init_data = rt5120_regu_match[i].init_data; + + rdev = devm_regulator_register(&pdev->dev, priv->rdesc + i, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "Failed to register regulator [%d]\n", i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct platform_device_id rt5120_regulator_dev_table[] = { + { "rt5120-regulator", 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, rt5120_regulator_dev_table); + +static struct platform_driver rt5120_regulator_driver = { + .driver = { + .name = "rt5120-regulator", + }, + .id_table = rt5120_regulator_dev_table, + .probe = rt5120_regulator_probe, +}; +module_platform_driver(rt5120_regulator_driver); + +MODULE_AUTHOR("ChiYuan Huang "); +MODULE_DESCRIPTION("Richtek RT5120 regulator driver"); +MODULE_LICENSE("GPL v2");