accel/ivpu: Fix sporadic VPU boot failure
Wait for AON bit in HOST_SS_CPR_RST_CLR to return 0 before
starting VPUIP power up sequence, otherwise the VPU device
may sporadically fail to boot.
An error in power up sequence is propagated to the runtime
power management - the device will be in an error state
until the VPU driver is reloaded.
Fixes: 35b137630f
("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: stable@vger.kernel.org # 6.3.x
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607094502.388489-1-stanislaw.gruszka@linux.intel.com
This commit is contained in:
parent
b563e47957
commit
a3efabee58
|
@ -197,6 +197,11 @@ static void ivpu_pll_init_frequency_ratios(struct ivpu_device *vdev)
|
|||
hw->pll.pn_ratio = clamp_t(u8, fuse_pn_ratio, hw->pll.min_ratio, hw->pll.max_ratio);
|
||||
}
|
||||
|
||||
static int ivpu_hw_mtl_wait_for_vpuip_bar(struct ivpu_device *vdev)
|
||||
{
|
||||
return REGV_POLL_FLD(MTL_VPU_HOST_SS_CPR_RST_CLR, AON, 0, 100);
|
||||
}
|
||||
|
||||
static int ivpu_pll_drive(struct ivpu_device *vdev, bool enable)
|
||||
{
|
||||
struct ivpu_hw_info *hw = vdev->hw;
|
||||
|
@ -239,6 +244,12 @@ static int ivpu_pll_drive(struct ivpu_device *vdev, bool enable)
|
|||
ivpu_err(vdev, "Timed out waiting for PLL ready status\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = ivpu_hw_mtl_wait_for_vpuip_bar(vdev);
|
||||
if (ret) {
|
||||
ivpu_err(vdev, "Timed out waiting for VPUIP bar\n");
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
@ -256,7 +267,7 @@ static int ivpu_pll_disable(struct ivpu_device *vdev)
|
|||
|
||||
static void ivpu_boot_host_ss_rst_clr_assert(struct ivpu_device *vdev)
|
||||
{
|
||||
u32 val = REGV_RD32(MTL_VPU_HOST_SS_CPR_RST_CLR);
|
||||
u32 val = 0;
|
||||
|
||||
val = REG_SET_FLD(MTL_VPU_HOST_SS_CPR_RST_CLR, TOP_NOC, val);
|
||||
val = REG_SET_FLD(MTL_VPU_HOST_SS_CPR_RST_CLR, DSS_MAS, val);
|
||||
|
|
|
@ -91,6 +91,7 @@
|
|||
#define MTL_VPU_HOST_SS_CPR_RST_SET_MSS_MAS_MASK BIT_MASK(11)
|
||||
|
||||
#define MTL_VPU_HOST_SS_CPR_RST_CLR 0x00000098u
|
||||
#define MTL_VPU_HOST_SS_CPR_RST_CLR_AON_MASK BIT_MASK(0)
|
||||
#define MTL_VPU_HOST_SS_CPR_RST_CLR_TOP_NOC_MASK BIT_MASK(1)
|
||||
#define MTL_VPU_HOST_SS_CPR_RST_CLR_DSS_MAS_MASK BIT_MASK(10)
|
||||
#define MTL_VPU_HOST_SS_CPR_RST_CLR_MSS_MAS_MASK BIT_MASK(11)
|
||||
|
|
Loading…
Reference in New Issue