A set of fixes for the v5.5 series:

- Fix the build for the Xtensa driver.
 
 - Make sure to set up the parent device for mpc8xxx.
 
 - Clarify the look-up error message.
 
 - Fix the usage of the line direction in the mockup device.
 
 - Fix a type warning on the Aspeed driver.
 
 - Remove the pointless __exit annotation on the xgs-iproc which
   is causing a compilation problem.
 
 - Fix up emultation of open drain outputs .get_direction()
 
 - Fix the IRQ callbacks on the PCA953xx to use bitops and
   work properly.
 
 - Fix the Kconfig on the Tegra driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl4D6rAACgkQQRCzN7AZ
 XXNEnQ/9Gb19jq7YEEIh3oGhZoMErlD/+ZIyP82ejggVbhi4aRnGJHeaZSNPFJKK
 5mvncpJdgONdGym6MNT4pDVLGRqyHe2FgTAEhjpBBVqS9unnTU9obem6EoY+ur5a
 EFt2LjTz9Yntg3mkjFJJwtdozAYSr+8SpAepsxzuUnjFpeUzaEMaTmMxmKsUcPbD
 X2KO8rTxPHUAn/9TqfP2ywNQh3tLTU9O2coPS4O7VnWiG+AvqTTnubWrsIktNrB/
 On30lEfxjQkzUZtHdSmvNg79BAhd436rcGB686dleiJEmp9MvtvVLxE01Ehf3bZl
 IX0tndAxUhnUDOyI6vrW9AdL/S9nG3VM03Z/YPx8e4UHlMSU6OyPqKZOPXTjTIJr
 jpuXqz+LqhqeZdAO7HBdQm1yUZhv9W2Hw46hchZJyabDBoQ4UG/y1E7sMe2TlpaK
 2xFjagtNpAQbSVMsA1Bzh6z2J1LWo/8J+xuQv28gBpjT9rMTYBRIkIXJKyuWN2tF
 QXHW9tejiRY560IhRVVj4ckswvZiizT5ZGQPxwS/Piw9+41ELFRjcONyOqMO6aGl
 TxtUqvZauWpVcLMvoRCjweTWBdJDXgJXzFl7vw+3znmgLctrIuLDe+7MuNBZlHI7
 +VFteHW/rv/WucepM5BhAgWTM/G08xm8o2/zuS2xKSjQKF71NeM=
 =eZNi
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "A set of fixes for the v5.5 series:

   - Fix the build for the Xtensa driver.

   - Make sure to set up the parent device for mpc8xxx.

   - Clarify the look-up error message.

   - Fix the usage of the line direction in the mockup device.

   - Fix a type warning on the Aspeed driver.

   - Remove the pointless __exit annotation on the xgs-iproc which is
     causing a compilation problem.

   - Fix up emultation of open drain outputs .get_direction()

   - Fix the IRQ callbacks on the PCA953xx to use bitops and work
     properly.

   - Fix the Kconfig on the Tegra driver"

* tag 'gpio-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: tegra186: Allow building on Tegra194-only configurations
  gpio: pca953x: Switch to bitops in IRQ callbacks
  gpiolib: fix up emulated open drain outputs
  MAINTAINERS: Append missed file to the database
  gpio: xgs-iproc: remove __exit annotation for iproc_gpio_remove
  gpio: aspeed: avoid return type warning
  gpio: mockup: Fix usage of new GPIO_LINE_DIRECTION
  gpio: Fix error message on out-of-range GPIO in lookup table
  gpio: mpc8xxx: Add platform device to gpiochip->parent
  gpio: xtensa: fix driver build
This commit is contained in:
Linus Torvalds 2019-12-27 11:02:48 -08:00
commit a305bd7c9c
9 changed files with 35 additions and 28 deletions

View File

@ -7034,6 +7034,7 @@ L: linux-acpi@vger.kernel.org
S: Maintained
F: Documentation/firmware-guide/acpi/gpio-properties.rst
F: drivers/gpio/gpiolib-acpi.c
F: drivers/gpio/gpiolib-acpi.h
GPIO IR Transmitter
M: Sean Young <sean@mess.org>

View File

@ -553,8 +553,8 @@ config GPIO_TEGRA
config GPIO_TEGRA186
tristate "NVIDIA Tegra186 GPIO support"
default ARCH_TEGRA_186_SOC
depends on ARCH_TEGRA_186_SOC || COMPILE_TEST
default ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC
depends on ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || COMPILE_TEST
depends on OF_GPIO
select GPIOLIB_IRQCHIP
select IRQ_DOMAIN_HIERARCHY

View File

@ -107,7 +107,7 @@ static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
default:
/* acturally if code runs to here, it's an error case */
BUG_ON(1);
BUG();
}
}

View File

@ -226,7 +226,7 @@ static int gpio_mockup_get_direction(struct gpio_chip *gc, unsigned int offset)
int direction;
mutex_lock(&chip->lock);
direction = !chip->lines[offset].dir;
direction = chip->lines[offset].dir;
mutex_unlock(&chip->lock);
return direction;
@ -395,7 +395,7 @@ static int gpio_mockup_probe(struct platform_device *pdev)
struct gpio_chip *gc;
struct device *dev;
const char *name;
int rv, base;
int rv, base, i;
u16 ngpio;
dev = &pdev->dev;
@ -447,6 +447,9 @@ static int gpio_mockup_probe(struct platform_device *pdev)
if (!chip->lines)
return -ENOMEM;
for (i = 0; i < gc->ngpio; i++)
chip->lines[i].dir = GPIO_LINE_DIRECTION_IN;
if (device_property_read_bool(dev, "named-gpio-lines")) {
rv = gpio_mockup_name_lines(dev, chip);
if (rv)

View File

@ -346,6 +346,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
return -ENOMEM;
gc = &mpc8xxx_gc->gc;
gc->parent = &pdev->dev;
if (of_property_read_bool(np, "little-endian")) {
ret = bgpio_init(gc, &pdev->dev, 4,

View File

@ -568,16 +568,18 @@ static void pca953x_irq_mask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
chip->irq_mask[d->hwirq / BANK_SZ] &= ~BIT(d->hwirq % BANK_SZ);
clear_bit(hwirq, chip->irq_mask);
}
static void pca953x_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
chip->irq_mask[d->hwirq / BANK_SZ] |= BIT(d->hwirq % BANK_SZ);
set_bit(hwirq, chip->irq_mask);
}
static int pca953x_irq_set_wake(struct irq_data *d, unsigned int on)
@ -635,8 +637,7 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
int bank_nb = d->hwirq / BANK_SZ;
u8 mask = BIT(d->hwirq % BANK_SZ);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (!(type & IRQ_TYPE_EDGE_BOTH)) {
dev_err(&chip->client->dev, "irq %d: unsupported type %d\n",
@ -644,15 +645,8 @@ static int pca953x_irq_set_type(struct irq_data *d, unsigned int type)
return -EINVAL;
}
if (type & IRQ_TYPE_EDGE_FALLING)
chip->irq_trig_fall[bank_nb] |= mask;
else
chip->irq_trig_fall[bank_nb] &= ~mask;
if (type & IRQ_TYPE_EDGE_RISING)
chip->irq_trig_raise[bank_nb] |= mask;
else
chip->irq_trig_raise[bank_nb] &= ~mask;
assign_bit(hwirq, chip->irq_trig_fall, type & IRQ_TYPE_EDGE_FALLING);
assign_bit(hwirq, chip->irq_trig_raise, type & IRQ_TYPE_EDGE_RISING);
return 0;
}
@ -661,10 +655,10 @@ static void pca953x_irq_shutdown(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct pca953x_chip *chip = gpiochip_get_data(gc);
u8 mask = BIT(d->hwirq % BANK_SZ);
irq_hw_number_t hwirq = irqd_to_hwirq(d);
chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask;
chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
clear_bit(hwirq, chip->irq_trig_raise);
clear_bit(hwirq, chip->irq_trig_fall);
}
static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pending)

View File

@ -280,7 +280,7 @@ static int iproc_gpio_probe(struct platform_device *pdev)
return 0;
}
static int __exit iproc_gpio_remove(struct platform_device *pdev)
static int iproc_gpio_remove(struct platform_device *pdev)
{
struct iproc_gpio_chip *chip;

View File

@ -44,15 +44,14 @@ static inline unsigned long enable_cp(unsigned long *cpenable)
unsigned long flags;
local_irq_save(flags);
RSR_CPENABLE(*cpenable);
WSR_CPENABLE(*cpenable | BIT(XCHAL_CP_ID_XTIOP));
*cpenable = xtensa_get_sr(cpenable);
xtensa_set_sr(*cpenable | BIT(XCHAL_CP_ID_XTIOP), cpenable);
return flags;
}
static inline void disable_cp(unsigned long flags, unsigned long cpenable)
{
WSR_CPENABLE(cpenable);
xtensa_set_sr(cpenable, cpenable);
local_irq_restore(flags);
}

View File

@ -220,6 +220,14 @@ int gpiod_get_direction(struct gpio_desc *desc)
chip = gpiod_to_chip(desc);
offset = gpio_chip_hwgpio(desc);
/*
* Open drain emulation using input mode may incorrectly report
* input here, fix that up.
*/
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) &&
test_bit(FLAG_IS_OUT, &desc->flags))
return 0;
if (!chip->get_direction)
return -ENOTSUPP;
@ -4472,8 +4480,9 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
if (chip->ngpio <= p->chip_hwnum) {
dev_err(dev,
"requested GPIO %d is out of range [0..%d] for chip %s\n",
idx, chip->ngpio, chip->label);
"requested GPIO %u (%u) is out of range [0..%u] for chip %s\n",
idx, p->chip_hwnum, chip->ngpio - 1,
chip->label);
return ERR_PTR(-EINVAL);
}