OrgACRN
/
acrn-kernel
mirror of https://github.com/projectacrn/acrn-kernel.git
1
0
Fork 0
Code Issues Releases Wiki Activity

Bluetooth: btqcomsmd: Fix command timeout after setting BD address 

[ Upstream commit 5d44ab9e20 ]

On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:

    Bluetooth: hci0: Opcode 0x c03 failed: -110

Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.

Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.

Fixes: 1511cc750c ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Stephan Gerhold 2023-03-08 14:31:55 +01:00 committed by Greg Kroah-Hartman
parent 612cf2495e
commit 9508596006
1 changed files with 16 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/bluetooth/btqcomsmd.c
View File

@ -122,6 +122,21 @@ static int btqcomsmd_setup(struct hci_dev *hdev)
return 0;
}
static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
int ret;
ret = qca_set_bdaddr_rome(hdev, bdaddr);
if (ret)
return ret;
/* The firmware stops responding for a while after setting the bdaddr,
* causing timeouts for subsequent commands. Sleep a bit to avoid this.
*/
usleep_range(1000, 10000);
return 0;
}
static int btqcomsmd_probe(struct platform_device *pdev)
{
struct btqcomsmd *btq;
@ -162,7 +177,7 @@ static int btqcomsmd_probe(struct platform_device *pdev)
hdev->close = btqcomsmd_close;
hdev->send = btqcomsmd_send;
hdev->setup = btqcomsmd_setup;
hdev->set_bdaddr = qca_set_bdaddr_rome;
hdev->set_bdaddr = btqcomsmd_set_bdaddr;
ret = hci_register_dev(hdev);
if (ret < 0)