OrgACRN
/
acrn-kernel
mirror of https://github.com/projectacrn/acrn-kernel.git
1
0
Fork 0
Code Issues Releases Wiki Activity

serial: amba-pl011: add RS485 support 

Add basic support for RS485: Provide a callback to configure RS485
settings. Handle the RS485 specific part in the functions
pl011_rs485_tx_start() and pl011_rs485_tx_stop() which extend the generic
start/stop callbacks.
Beside via IOCTL from userspace RS485 can be enabled by means of the
device tree property "rs485-enabled-at-boot-time".

Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Link: https://lore.kernel.org/r/20210630225644.3744-1-LinoSanfilippo@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Lino Sanfilippo 2021-07-01 00:56:44 +02:00 committed by Greg Kroah-Hartman
parent 240e126c28
commit 8d47923772
1 changed files with 161 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

163
drivers/tty/serial/amba-pl011.c
View File

@ -265,6 +265,8 @@ struct uart_amba_port {
unsigned int old_cr; /* state during shutdown */
unsigned int fixed_baud; /* vendor-set fixed baud rate */
char type[12];
bool rs485_tx_started;
unsigned int rs485_tx_drain_interval; /* usecs */
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
bool using_tx_dma;
@ -275,6 +277,8 @@ struct uart_amba_port {
#endif
};
static unsigned int pl011_tx_empty(struct uart_port *port);
static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap,
unsigned int reg)
{
@ -1282,6 +1286,42 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
#define pl011_dma_flush_buffer NULL
#endif
static void pl011_rs485_tx_stop(struct uart_amba_port *uap)
{
struct uart_port *port = &uap->port;
int i = 0;
u32 cr;
/* Wait until hardware tx queue is empty */
while (!pl011_tx_empty(port)) {
if (i == port->fifosize) {
dev_warn(port->dev,
"timeout while draining hardware tx queue\n");
break;
}
udelay(uap->rs485_tx_drain_interval);
i++;
}
if (port->rs485.delay_rts_after_send)
mdelay(port->rs485.delay_rts_after_send);
cr = pl011_read(uap, REG_CR);
if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
cr &= ~UART011_CR_RTS;
else
cr |= UART011_CR_RTS;
/* Disable the transmitter and reenable the transceiver */
cr &= ~UART011_CR_TXE;
cr |= UART011_CR_RXE;
pl011_write(cr, uap, REG_CR);
uap->rs485_tx_started = false;
}
static void pl011_stop_tx(struct uart_port *port)
{
struct uart_amba_port *uap =
@ -1290,6 +1330,9 @@ static void pl011_stop_tx(struct uart_port *port)
uap->im &= ~UART011_TXIM;
pl011_write(uap->im, uap, REG_IMSC);
pl011_dma_tx_stop(uap);
if ((port->rs485.flags & SER_RS485_ENABLED) && uap->rs485_tx_started)
pl011_rs485_tx_stop(uap);
}
static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
@ -1380,6 +1423,32 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
return true;
}
static void pl011_rs485_tx_start(struct uart_amba_port *uap)
{
struct uart_port *port = &uap->port;
u32 cr;
/* Enable transmitter */
cr = pl011_read(uap, REG_CR);
cr |= UART011_CR_TXE;
/* Disable receiver if half-duplex */
if (!(port->rs485.flags & SER_RS485_RX_DURING_TX))
cr &= ~UART011_CR_RXE;
if (port->rs485.flags & SER_RS485_RTS_ON_SEND)
cr &= ~UART011_CR_RTS;
else
cr |= UART011_CR_RTS;
pl011_write(cr, uap, REG_CR);
if (port->rs485.delay_rts_before_send)
mdelay(port->rs485.delay_rts_before_send);
uap->rs485_tx_started = true;
}
/* Returns true if tx interrupts have to be (kept) enabled */
static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
{
@ -1397,6 +1466,10 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
return false;
}
if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
!uap->rs485_tx_started)
pl011_rs485_tx_start(uap);
/* If we are using DMA mode, try to send some characters. */
if (pl011_dma_tx_irq(uap))
return true;
@ -1542,6 +1615,9 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
container_of(port, struct uart_amba_port, port);
unsigned int cr;
if (port->rs485.flags & SER_RS485_ENABLED)
mctrl &= ~TIOCM_RTS;
cr = pl011_read(uap, REG_CR);
#define TIOCMBIT(tiocmbit, uartbit) \
@ -1763,7 +1839,17 @@ static int pl011_startup(struct uart_port *port)
/* restore RTS and DTR */
cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
cr |= UART01x_CR_UARTEN | UART011_CR_RXE;
if (port->rs485.flags & SER_RS485_ENABLED) {
if (port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
cr &= ~UART011_CR_RTS;
else
cr |= UART011_CR_RTS;
} else {
cr |= UART011_CR_TXE;
}
pl011_write(cr, uap, REG_CR);
spin_unlock_irq(&uap->port.lock);
@ -1864,6 +1950,9 @@ static void pl011_shutdown(struct uart_port *port)
pl011_dma_shutdown(uap);
if ((port->rs485.flags & SER_RS485_ENABLED) && uap->rs485_tx_started)
pl011_rs485_tx_stop(uap);
free_irq(uap->port.irq, uap);
pl011_disable_uart(uap);
@ -1941,6 +2030,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned int lcr_h, old_cr;
unsigned long flags;
unsigned int baud, quot, clkdiv;
unsigned int bits;
if (uap->vendor->oversampling)
clkdiv = 8;
@ -1991,6 +2081,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
if (uap->fifosize > 1)
lcr_h |= UART01x_LCRH_FEN;
bits = tty_get_frame_size(termios->c_cflag);
spin_lock_irqsave(&port->lock, flags);
/*
@ -1998,11 +2090,21 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
*/
uart_update_timeout(port, termios->c_cflag, baud);
/*
* Calculate the approximated time it takes to transmit one character
* with the given baud rate. We use this as the poll interval when we
* wait for the tx queue to empty.
*/
uap->rs485_tx_drain_interval = (bits * 1000 * 1000) / baud;
pl011_setup_status_masks(port, termios);
if (UART_ENABLE_MS(port, termios->c_cflag))
pl011_enable_ms(port);
if (port->rs485.flags & SER_RS485_ENABLED)
termios->c_cflag &= ~CRTSCTS;
/* first, disable everything */
old_cr = pl011_read(uap, REG_CR);
pl011_write(0, uap, REG_CR);
@ -2124,6 +2226,41 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
return ret;
}
static int pl011_rs485_config(struct uart_port *port,
struct serial_rs485 *rs485)
{
struct uart_amba_port *uap =
container_of(port, struct uart_amba_port, port);
/* pick sane settings if the user hasn't */
if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
!(rs485->flags & SER_RS485_RTS_AFTER_SEND)) {
rs485->flags |= SER_RS485_RTS_ON_SEND;
rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
}
/* clamp the delays to [0, 100ms] */
rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
memset(rs485->padding, 0, sizeof(rs485->padding));
if (port->rs485.flags & SER_RS485_ENABLED)
pl011_rs485_tx_stop(uap);
/* Set new configuration */
port->rs485 = *rs485;
/* Make sure auto RTS is disabled */
if (port->rs485.flags & SER_RS485_ENABLED) {
u32 cr = pl011_read(uap, REG_CR);
cr &= ~UART011_CR_RTSEN;
pl011_write(cr, uap, REG_CR);
port->status &= ~UPSTAT_AUTORTS;
}
return 0;
}
static const struct uart_ops amba_pl011_pops = {
.tx_empty = pl011_tx_empty,
.set_mctrl = pl011_set_mctrl,
@ -2588,10 +2725,28 @@ static int pl011_find_free_port(void)
return -EBUSY;
}
static int pl011_get_rs485_mode(struct uart_amba_port *uap)
{
struct uart_port *port = &uap->port;
struct serial_rs485 *rs485 = &port->rs485;
int ret;
ret = uart_get_rs485_mode(port);
if (ret)
return ret;
/* clamp the delays to [0, 100ms] */
rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
return 0;
}
static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
struct resource *mmiobase, int index)
{
void __iomem *base;
int ret;
base = devm_ioremap_resource(dev, mmiobase);
if (IS_ERR(base))
@ -2608,6 +2763,10 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = index;
ret = pl011_get_rs485_mode(uap);
if (ret)
return ret;
amba_ports[index] = uap;
return 0;
@ -2665,7 +2824,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.irq = dev->irq[0];
uap->port.ops = &amba_pl011_pops;
uap->port.rs485_config = pl011_rs485_config;
snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);