diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
deleted file mode 100644
index 997a287ed3f6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Pinctrl-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration
-using the pinctrl device tree bindings.
-
-                                 +-----+  +-----+
-                                 | dev |  | dev |
-    +------------------------+   +-----+  +-----+
-    | SoC                    |      |        |
-    |                   /----|------+--------+
-    |   +---+   +------+     | child bus A, on first set of pins
-    |   |I2C|---|Pinmux|     |
-    |   +---+   +------+     | child bus B, on second set of pins
-    |                   \----|------+--------+--------+
-    |                        |      |        |        |
-    +------------------------+  +-----+  +-----+  +-----+
-                                | dev |  | dev |  | dev |
-                                +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-pinctrl
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-
-Also required are:
-
-* Standard pinctrl properties that specify the pin mux state for each child
-  bus. See ../pinctrl/pinctrl-bindings.txt.
-
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
-
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
-
-	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
-	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
-	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
-
-Whenever an access is made to a device on a child bus, the relevant pinctrl
-state will be programmed into hardware.
-
-If an idle state is defined, whenever an access is not being made to a device
-on a child bus, the idle pinctrl state will be programmed into hardware.
-
-If an idle state is not defined, the most recently used pinctrl state will be
-left programmed into hardware whenever no access is being made of a device on
-a child bus.
-
-Example:
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c1>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
new file mode 100644
index 000000000000..2e3d555eb96c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+  signals, and represents the pin multiplexing configuration using the pinctrl device tree
+  bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+  For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+  I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+  The only exception is that no bus will be created for a state named "idle". If such a state is
+  defined, it must be the last entry in pinctrl-names. For example:
+
+    pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+    pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+    pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+  Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+  programmed into hardware.
+
+  If an idle state is defined, whenever an access is not being made to a device on a child bus,
+  the idle pinctrl state will be programmed into hardware.
+
+  If an idle state is not defined, the most recently used pinctrl state will be left programmed
+  into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+      to.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c-parent = <&i2c1>;
+
+      pinctrl-names = "ddc", "pta", "idle";
+      pinctrl-0 = <&state_i2cmux_ddc>;
+      pinctrl-1 = <&state_i2cmux_pta>;
+      pinctrl-2 = <&state_i2cmux_idle>;
+
+      i2c@0 {
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+    };