From 632ae5d7eb348b3ef88552ec0999260b6f9d6ab1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 2 Dec 2022 19:35:18 +0100 Subject: [PATCH] pwm: stm32: Use regmap_clear_bits and regmap_set_bits where applicable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Found using coccinelle and the following semantic patch: @@ expression map, reg, bits; @@ - regmap_update_bits(map, reg, bits, bits) + regmap_set_bits(map, reg, bits) @@ expression map, reg, bits; @@ - regmap_update_bits(map, reg, bits, 0) + regmap_clear_bits(map, reg, bits) Tested-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20221115111347.3705732-6-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-stm32.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c index 794ca5b02968..21e4a34dfff3 100644 --- a/drivers/pwm/pwm-stm32.c +++ b/drivers/pwm/pwm-stm32.c @@ -115,14 +115,14 @@ static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm, int ret; /* Ensure registers have been updated, enable counter and capture */ - regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN); + regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); /* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */ dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3; ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E; ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3; - regmap_update_bits(priv->regmap, TIM_CCER, ccen, ccen); + regmap_set_bits(priv->regmap, TIM_CCER, ccen); /* * Timer DMA burst mode. Request 2 registers, 2 bursts, to get both @@ -160,8 +160,8 @@ static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm, } stop: - regmap_update_bits(priv->regmap, TIM_CCER, ccen, 0); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, ccen); + regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); return ret; } @@ -359,7 +359,7 @@ static int stm32_pwm_config(struct stm32_pwm *priv, int ch, regmap_write(priv->regmap, TIM_PSC, prescaler); regmap_write(priv->regmap, TIM_ARR, prd - 1); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE); + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE); /* Calculate the duty cycles */ dty = prd * duty_ns; @@ -377,7 +377,7 @@ static int stm32_pwm_config(struct stm32_pwm *priv, int ch, else regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr); - regmap_update_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE, TIM_BDTR_MOE); + regmap_set_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE); return 0; } @@ -411,13 +411,13 @@ static int stm32_pwm_enable(struct stm32_pwm *priv, int ch) if (priv->have_complementary_output) mask |= TIM_CCER_CC1NE << (ch * 4); - regmap_update_bits(priv->regmap, TIM_CCER, mask, mask); + regmap_set_bits(priv->regmap, TIM_CCER, mask); /* Make sure that registers are updated */ - regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); + regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); /* Enable controller */ - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN); + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); return 0; } @@ -431,11 +431,11 @@ static void stm32_pwm_disable(struct stm32_pwm *priv, int ch) if (priv->have_complementary_output) mask |= TIM_CCER_CC1NE << (ch * 4); - regmap_update_bits(priv->regmap, TIM_CCER, mask, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, mask); /* When all channels are disabled, we can disable the controller */ if (!active_channels(priv)) - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); + regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); clk_disable(priv->clk); } @@ -568,10 +568,9 @@ static void stm32_pwm_detect_complementary(struct stm32_pwm *priv) * If complementary bit doesn't exist writing 1 will have no * effect so we can detect it. */ - regmap_update_bits(priv->regmap, - TIM_CCER, TIM_CCER_CC1NE, TIM_CCER_CC1NE); + regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); regmap_read(priv->regmap, TIM_CCER, &ccer); - regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); priv->have_complementary_output = (ccer != 0); } @@ -585,10 +584,9 @@ static int stm32_pwm_detect_channels(struct stm32_pwm *priv) * If channels enable bits don't exist writing 1 will have no * effect so we can detect and count them. */ - regmap_update_bits(priv->regmap, - TIM_CCER, TIM_CCER_CCXE, TIM_CCER_CCXE); + regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE); regmap_read(priv->regmap, TIM_CCER, &ccer); - regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE); if (ccer & TIM_CCER_CC1E) npwm++;