i2c: tegra: allow VI support to be compiled out
Save a bit of code for older Tegra platforms by compiling out VI's I2C mode support that's used only for Tegra210. $ size i2c-tegra.o text data bss dec hex filename 11381 292 8 11681 2da1 i2c-tegra.o (full) 10193 292 8 10493 28fd i2c-tegra.o (no-dvc) 9145 292 8 9445 24e5 i2c-tegra.o (no-vi,no-dvc) Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
This commit is contained in:
parent
a55efa7edf
commit
4f5d68c859
|
@ -297,6 +297,7 @@ struct tegra_i2c_dev {
|
|||
};
|
||||
|
||||
#define IS_DVC(dev) (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && (dev)->is_dvc)
|
||||
#define IS_VI(dev) (IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC) && (dev)->is_vi)
|
||||
|
||||
static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
|
||||
unsigned int reg)
|
||||
|
@ -317,7 +318,7 @@ static u32 tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
|
|||
{
|
||||
if (IS_DVC(i2c_dev))
|
||||
reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
|
||||
else if (i2c_dev->is_vi)
|
||||
else if (IS_VI(i2c_dev))
|
||||
reg = 0xc00 + (reg << 2);
|
||||
|
||||
return reg;
|
||||
|
@ -330,7 +331,7 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
|
|||
/* read back register to make sure that register writes completed */
|
||||
if (reg != I2C_TX_FIFO)
|
||||
readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
|
||||
else if (i2c_dev->is_vi)
|
||||
else if (IS_VI(i2c_dev))
|
||||
readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS));
|
||||
}
|
||||
|
||||
|
@ -438,7 +439,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
|
|||
u32 *dma_buf;
|
||||
int err;
|
||||
|
||||
if (i2c_dev->is_vi)
|
||||
if (IS_VI(i2c_dev))
|
||||
return 0;
|
||||
|
||||
if (!i2c_dev->hw->has_apb_dma) {
|
||||
|
@ -636,7 +637,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
|
|||
i2c_writel(i2c_dev, val, I2C_CNFG);
|
||||
i2c_writel(i2c_dev, 0, I2C_INT_MASK);
|
||||
|
||||
if (i2c_dev->is_vi)
|
||||
if (IS_VI(i2c_dev))
|
||||
tegra_i2c_vi_init(i2c_dev);
|
||||
|
||||
switch (t->bus_freq_hz) {
|
||||
|
@ -688,7 +689,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
|
|||
return err;
|
||||
}
|
||||
|
||||
if (!IS_DVC(i2c_dev) && !i2c_dev->is_vi) {
|
||||
if (!IS_DVC(i2c_dev) && !IS_VI(i2c_dev)) {
|
||||
u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
|
||||
|
||||
sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
|
||||
|
@ -831,7 +832,7 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
|
|||
i2c_dev->msg_buf_remaining = buf_remaining;
|
||||
i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;
|
||||
|
||||
if (i2c_dev->is_vi)
|
||||
if (IS_VI(i2c_dev))
|
||||
i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
|
||||
else
|
||||
i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
|
||||
|
@ -1627,7 +1628,9 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
|
|||
static const struct of_device_id tegra_i2c_of_match[] = {
|
||||
{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
|
||||
{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
|
||||
#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
|
||||
{ .compatible = "nvidia,tegra210-i2c-vi", .data = &tegra210_i2c_hw, },
|
||||
#endif
|
||||
{ .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
|
||||
{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
|
||||
{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
|
||||
|
@ -1654,7 +1657,8 @@ static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
|
|||
of_device_is_compatible(np, "nvidia,tegra20-i2c-dvc"))
|
||||
i2c_dev->is_dvc = true;
|
||||
|
||||
if (of_device_is_compatible(np, "nvidia,tegra210-i2c-vi"))
|
||||
if (IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC) &&
|
||||
of_device_is_compatible(np, "nvidia,tegra210-i2c-vi"))
|
||||
i2c_dev->is_vi = true;
|
||||
}
|
||||
|
||||
|
@ -1683,7 +1687,7 @@ static int tegra_i2c_init_clocks(struct tegra_i2c_dev *i2c_dev)
|
|||
if (i2c_dev->hw == &tegra20_i2c_hw || i2c_dev->hw == &tegra30_i2c_hw)
|
||||
i2c_dev->clocks[i2c_dev->nclocks++].id = "fast-clk";
|
||||
|
||||
if (i2c_dev->is_vi)
|
||||
if (IS_VI(i2c_dev))
|
||||
i2c_dev->clocks[i2c_dev->nclocks++].id = "slow";
|
||||
|
||||
err = devm_clk_bulk_get(i2c_dev->dev, i2c_dev->nclocks,
|
||||
|
@ -1801,7 +1805,7 @@ static int tegra_i2c_probe(struct platform_device *pdev)
|
|||
* VI I2C device shouldn't be marked as IRQ-safe because VI I2C won't
|
||||
* be used for atomic transfers.
|
||||
*/
|
||||
if (!i2c_dev->is_vi)
|
||||
if (!IS_VI(i2c_dev))
|
||||
pm_runtime_irq_safe(i2c_dev->dev);
|
||||
|
||||
pm_runtime_enable(i2c_dev->dev);
|
||||
|
@ -1873,7 +1877,7 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
|
|||
* power ON/OFF during runtime PM resume/suspend, meaning that
|
||||
* controller needs to be re-initialized after power ON.
|
||||
*/
|
||||
if (i2c_dev->is_vi) {
|
||||
if (IS_VI(i2c_dev)) {
|
||||
err = tegra_i2c_init(i2c_dev);
|
||||
if (err)
|
||||
goto disable_clocks;
|
||||
|
|
Loading…
Reference in New Issue