diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 85d3c3b4b7bd..ca457f19f7fe 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -190,9 +190,47 @@ endif
 cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
 cflags-$(CONFIG_CPU_BMIPS)	+= -march=mips32 -Wa,-mips32 -Wa,--trap
 
+cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f -Wa,--trap
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-$(CONFIG_CPU_LOONGSON2EF) += $(call cc-option,-mno-loongson-mmi)
+ifdef CONFIG_CPU_LOONGSON64
+cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
+cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
+cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
+endif
+cflags-$(CONFIG_CPU_LOONGSON64) += $(call cc-option,-mno-loongson-mmi)
+
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
 cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS)	+= $(call cc-option,-mno-daddi,)
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
+cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
+endif
+
+#
+# Some versions of binutils, not currently mainline as of 2019/02/04, support
+# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
+# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
+# description).
+#
+# We disable this in order to prevent the assembler meddling with the
+# instruction that labels refer to, ie. if we label an ll instruction:
+#
+# 1: ll v0, 0(a0)
+#
+# ...then with the assembler fix applied the label may actually point at a sync
+# instruction inserted by the assembler, and if we were using the label in an
+# exception table the table would no longer contain the address of the ll
+# instruction.
+#
+# Avoid this by explicitly disabling that assembler behaviour. If upstream
+# binutils does not merge support for the flag then we can revisit & remove
+# this later - for now it ensures vendor toolchains don't cause problems.
+#
+cflags-$(CONFIG_CPU_LOONGSON64)	+= $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
 
 # For smartmips configurations, there are hundreds of warnings due to ISA overrides
 # in assembly and header files. smartmips is only supported for MIPS32r1 onwards
diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform
index c6f7a4b95997..d446b705fba4 100644
--- a/arch/mips/loongson2ef/Platform
+++ b/arch/mips/loongson2ef/Platform
@@ -2,41 +2,6 @@
 # Loongson Processors' Support
 #
 
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= -Wa,--trap
-cflags-$(CONFIG_CPU_LOONGSON2E) += -march=loongson2e
-cflags-$(CONFIG_CPU_LOONGSON2F) += -march=loongson2f
-#
-# Some versions of binutils, not currently mainline as of 2019/02/04, support
-# an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction
-# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a
-# description).
-#
-# We disable this in order to prevent the assembler meddling with the
-# instruction that labels refer to, ie. if we label an ll instruction:
-#
-# 1: ll v0, 0(a0)
-#
-# ...then with the assembler fix applied the label may actually point at a sync
-# instruction inserted by the assembler, and if we were using the label in an
-# exception table the table would no longer contain the address of the ll
-# instruction.
-#
-# Avoid this by explicitly disabling that assembler behaviour. If upstream
-# binutils does not merge support for the flag then we can revisit & remove
-# this later - for now it ensures vendor toolchains don't cause problems.
-#
-cflags-$(CONFIG_CPU_LOONGSON2EF)	+= $(call cc-option,-Wa$(comma)-mno-fix-loongson3-llsc,)
-
-# Enable the workarounds for Loongson2f
-ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
-cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa,-mfix-loongson2f-nop
-cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa,-mfix-loongson2f-jump
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
 #
 # Loongson Machines' Support
 #
diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform
index 473404cae1c4..49c9889e3d56 100644
--- a/arch/mips/loongson64/Platform
+++ b/arch/mips/loongson64/Platform
@@ -1,19 +1,3 @@
-#
-# Loongson Processors' Support
-#
-
-
-cflags-$(CONFIG_CPU_LOONGSON64)	+= -Wa,--trap
-
-ifdef CONFIG_CPU_LOONGSON64
-cflags-$(CONFIG_CC_IS_GCC) += -march=loongson3a
-cflags-$(CONFIG_CC_IS_CLANG) += -march=mips64r2
-endif
-
-# Some -march= flags enable MMI instructions, and GCC complains about that
-# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
-cflags-y += $(call cc-option,-mno-loongson-mmi)
-
 #
 # Loongson Machines' Support
 #