riscv: Introduce CONFIG_RELOCATABLE

This config allows to compile 64b kernel as PIE and to relocate it at
any virtual address at runtime: this paves the way to KASLR.
Runtime relocation is possible since relocation metadata are embedded into
the kernel.

Note that relocating at runtime introduces an overhead even if the
kernel is loaded at the same address it was linked at and that the compiler
options are those used in arm64 which uses the same RELA relocation
format.

Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230329045329.64565-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

arch/riscv/Kconfig

@@ -561,6 +561,20 @@ config COMPAT
 
 	  If you want to execute 32-bit userspace applications, say Y.
 
+config RELOCATABLE
+	bool "Build a relocatable kernel"
+	depends on MMU && 64BIT && !XIP_KERNEL
+	help
+          This builds a kernel as a Position Independent Executable (PIE),
+          which retains all relocation metadata required to relocate the
+          kernel binary at runtime to a different virtual address than the
+          address it was linked at.
+          Since RISCV uses the RELA relocation format, this requires a
+          relocation pass at runtime even if the kernel is loaded at the
+          same address it was linked at.
+
+          If unsure, say N.
+
 endmenu # "Kernel features"
 
 menu "Boot options"

arch/riscv/Makefile

@@ -7,9 +7,12 @@
 #
 
 OBJCOPYFLAGS    := -O binary
-LDFLAGS_vmlinux :=
+ifeq ($(CONFIG_RELOCATABLE),y)
+	LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro
+	KBUILD_CFLAGS += -fPIE
+endif
 ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
-	LDFLAGS_vmlinux := --no-relax
+	LDFLAGS_vmlinux += --no-relax
 	KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
 ifeq ($(CONFIG_RISCV_ISA_C),y)
 	CC_FLAGS_FTRACE := -fpatchable-function-entry=4

arch/riscv/kernel/vmlinux.lds.S

@@ -122,10 +122,23 @@ SECTIONS
 		*(.sdata*)
 	}
 
-	.rela.dyn : {
-		*(.rela*)
+	.rela.dyn : ALIGN(8) {
+		__rela_dyn_start = .;
+		*(.rela .rela*)
+		__rela_dyn_end = .;
 	}
 
+#ifdef CONFIG_RELOCATABLE
+	.data.rel : { *(.data.rel*) }
+	.got : { *(.got*) }
+	.plt : { *(.plt) }
+	.dynamic : { *(.dynamic) }
+	.dynsym : { *(.dynsym) }
+	.dynstr : { *(.dynstr) }
+	.hash : { *(.hash) }
+	.gnu.hash : { *(.gnu.hash) }
+#endif
+
 #ifdef CONFIG_EFI
 	.pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
 	__pecoff_data_raw_size = ABSOLUTE(. - __pecoff_text_end);

arch/riscv/mm/Makefile

@@ -1,6 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 CFLAGS_init.o := -mcmodel=medany
+ifdef CONFIG_RELOCATABLE
+CFLAGS_init.o += -fno-pie
+endif
+
 ifdef CONFIG_FTRACE
 CFLAGS_REMOVE_init.o = $(CC_FLAGS_FTRACE)
 CFLAGS_REMOVE_cacheflush.o = $(CC_FLAGS_FTRACE)

arch/riscv/mm/init.c

@@ -20,6 +20,9 @@
 #include <linux/dma-map-ops.h>
 #include <linux/crash_dump.h>
 #include <linux/hugetlb.h>
+#ifdef CONFIG_RELOCATABLE
+#include <linux/elf.h>
+#endif
 
 #include <asm/fixmap.h>
 #include <asm/tlbflush.h>
@@ -146,7 +149,7 @@ static void __init print_vm_layout(void)
 		print_ml("kasan", KASAN_SHADOW_START, KASAN_SHADOW_END);
 #endif
 
-		print_ml("kernel", (unsigned long)KERNEL_LINK_ADDR,
+		print_ml("kernel", (unsigned long)kernel_map.virt_addr,
 			 (unsigned long)ADDRESS_SPACE_END);
 	}
 }
@@ -820,6 +823,44 @@ static __init void set_satp_mode(void)
 #error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
 #endif
 
+#ifdef CONFIG_RELOCATABLE
+extern unsigned long __rela_dyn_start, __rela_dyn_end;
+
+static void __init relocate_kernel(void)
+{
+	Elf64_Rela *rela = (Elf64_Rela *)&__rela_dyn_start;
+	/*
+	 * This holds the offset between the linked virtual address and the
+	 * relocated virtual address.
+	 */
+	uintptr_t reloc_offset = kernel_map.virt_addr - KERNEL_LINK_ADDR;
+	/*
+	 * This holds the offset between kernel linked virtual address and
+	 * physical address.
+	 */
+	uintptr_t va_kernel_link_pa_offset = KERNEL_LINK_ADDR - kernel_map.phys_addr;
+
+	for ( ; rela < (Elf64_Rela *)&__rela_dyn_end; rela++) {
+		Elf64_Addr addr = (rela->r_offset - va_kernel_link_pa_offset);
+		Elf64_Addr relocated_addr = rela->r_addend;
+
+		if (rela->r_info != R_RISCV_RELATIVE)
+			continue;
+
+		/*
+		 * Make sure to not relocate vdso symbols like rt_sigreturn
+		 * which are linked from the address 0 in vmlinux since
+		 * vdso symbol addresses are actually used as an offset from
+		 * mm->context.vdso in VDSO_OFFSET macro.
+		 */
+		if (relocated_addr >= KERNEL_LINK_ADDR)
+			relocated_addr += reloc_offset;
+
+		*(Elf64_Addr *)addr = relocated_addr;
+	}
+}
+#endif /* CONFIG_RELOCATABLE */
+
 #ifdef CONFIG_XIP_KERNEL
 static void __init create_kernel_page_table(pgd_t *pgdir,
 					    __always_unused bool early)
@@ -1007,6 +1048,17 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
 	BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
 #endif
 
+#ifdef CONFIG_RELOCATABLE
+	/*
+	 * Early page table uses only one PUD, which makes it possible
+	 * to map PUD_SIZE aligned on PUD_SIZE: if the relocation offset
+	 * makes the kernel cross over a PUD_SIZE boundary, raise a bug
+	 * since a part of the kernel would not get mapped.
+	 */
+	BUG_ON(PUD_SIZE - (kernel_map.virt_addr & (PUD_SIZE - 1)) < kernel_map.size);
+	relocate_kernel();
+#endif
+
 	apply_early_boot_alternatives();
 	pt_ops_set_early();