arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards

commit 8cd79b729e upstream.

Commit 91419ae042 ("arm64: dts: rockchip: use BCLK to GPIO switch on
rk3399") modified i2s0 to switch the corresponding pins off when idle.
For the ROCK Pi 4 boards, this means that i2s0 has the following pinctrl
setting:

    pinctrl-names = "bclk_on", "bclk_off";
    pinctrl-0 = <&i2s0_2ch_bus>;
    pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;

Due to this change, i2s0 fails to probe on my Radxa ROCK 4SE and ROCK Pi
4B boards:

    rockchip-pinctrl pinctrl: pin gpio3-29 already requested by leds; cannot claim for ff880000.i2s
    rockchip-pinctrl pinctrl: pin-125 (ff880000.i2s) status -22
    rockchip-pinctrl pinctrl: could not request pin 125 (gpio3-29) from group i2s0-8ch-bus-bclk-off  on device rockchip-pinctrl
    rockchip-i2s ff880000.i2s: Error applying setting, reverse things back
    rockchip-i2s ff880000.i2s: bclk disable failed -22

A pin requested for i2s0_8ch_bus_bclk_off has already been requested by
user_led2, so whichever driver probes first will have the pin allocated.

The hardware uses 2-channel i2s so fix this error by setting pinctl-1 to
i2s0_2ch_bus_bclk_off which doesn't contain the pin allocated to user_led2.

I checked the schematics for all Radxa boards based on ROCK Pi 4 and this
change is compatible with all boards.

Fixes: 91419ae042 ("arm64: dts: rockchip: use BCLK to GPIO switch on rk3399")
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Link: https://lore.kernel.org/r/20231013114737.494410-3-chris.obbard@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi

@@ -493,6 +493,7 @@ &i2c4 {
 
 &i2s0 {
 	pinctrl-0 = <&i2s0_2ch_bus>;
+	pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
 	rockchip,capture-channels = <2>;
 	rockchip,playback-channels = <2>;
 	status = "okay";