net: ethernet: mtk_eth_soc: fix RX data corruption issue

Fix data corruption issue with SerDes connected PHYs operating at 1.25
Gbps speed where we could previously observe about 30% packet loss while
the bad packet counter was increasing.

As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531
switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using
rate-adaptation to 2500Base-X mode, this issue only got exposed now when
we started trying to use SFP modules operating with 1.25 Gbps with the
BananaPi R3 board.

The fix is to set bit 12 which disables the RX FIFO clear function when
setting up MAC MCR, MediaTek SDK did the same change stating:
"If without this patch, kernel might receive invalid packets that are
corrupted by GMAC."[1]

[1]: d8a2975939

Fixes: 42c03844e9 ("net-next: mediatek: add support for MediaTek MT7622 SoC")
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Daniel Golle 2023-03-04 13:43:20 +00:00 committed by Jakub Kicinski
parent 58aac3a2ef
commit 193250ace2
2 changed files with 3 additions and 1 deletions

View File

@ -616,7 +616,8 @@ static int mtk_mac_finish(struct phylink_config *config, unsigned int mode,
mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
mcr_new = mcr_cur;
mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE |
MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK;
MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK |
MAC_MCR_RX_FIFO_CLR_DIS;
/* Only update control register when needed! */
if (mcr_new != mcr_cur)

View File

@ -397,6 +397,7 @@
#define MAC_MCR_FORCE_MODE BIT(15)
#define MAC_MCR_TX_EN BIT(14)
#define MAC_MCR_RX_EN BIT(13)
#define MAC_MCR_RX_FIFO_CLR_DIS BIT(12)
#define MAC_MCR_BACKOFF_EN BIT(9)
#define MAC_MCR_BACKPR_EN BIT(8)
#define MAC_MCR_FORCE_RX_FC BIT(5)