ALSA: usb: Add quirk for 192KHz recording on E-Mu devices

When recording at 176.2KHz or 192Khz, the device adds a 32-bit length
header to the capture packets, which obviously needs to be ignored for
recording to work properly.

Userspace expected:  L0 L1 L2 R0 R1 R2
...but actually got: R2 L0 L1 L2 R0 R1

Also, the last byte of the length header being interpreted as L0 of
the first sample caused spikes every 0.5ms, resulting in a loud 16KHz
tone (about the highest 'B' on a piano) being present throughout
captures.

Tested at all sample rates on an E-Mu 0404USB, and tested for
regressions on a generic USB headset.

Signed-off-by: Calvin Owens <jcalvinowens@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Calvin Owens 2013-04-12 22:33:59 -05:00 committed by Takashi Iwai
parent b26b511668
commit 1539d4f82a
4 changed files with 4 additions and 1 deletions

View File

@ -116,6 +116,7 @@ struct snd_usb_substream {
unsigned int altset_idx; /* USB data format: index of alternate setting */
unsigned int txfr_quirk:1; /* allow sub-frame alignment */
unsigned int fmt_type; /* USB audio format type (1-3) */
unsigned int pkt_offset_adj; /* Bytes to drop from beginning of packets (for non-compliant devices) */
unsigned int running: 1; /* running status */

View File

@ -1162,7 +1162,7 @@ static void retire_capture_urb(struct snd_usb_substream *subs,
stride = runtime->frame_bits >> 3;
for (i = 0; i < urb->number_of_packets; i++) {
cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset + subs->pkt_offset_adj;
if (urb->iso_frame_desc[i].status && printk_ratelimit()) {
snd_printdd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
// continue;

View File

@ -854,6 +854,7 @@ static void set_format_emu_quirk(struct snd_usb_substream *subs,
break;
}
snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0;
}
void snd_usb_set_format_quirk(struct snd_usb_substream *subs,

View File

@ -93,6 +93,7 @@ static void snd_usb_init_substream(struct snd_usb_stream *as,
subs->dev = as->chip->dev;
subs->txfr_quirk = as->chip->txfr_quirk;
subs->speed = snd_usb_get_speed(subs->dev);
subs->pkt_offset_adj = 0;
snd_usb_set_pcm_ops(as->pcm, stream);