ALSA: hda: cs35l41: Add Amp Name based on channel and index

This will be used to identify ALSA controls and firmware.
The Amp Name will be a channel identifier (L or R), and an
index, which identifies which amp for that channel.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220509214703.4482-10-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Stefan Binding 2022-05-09 22:46:46 +01:00 committed by Takashi Iwai
parent 0db99577c4
commit 00f87ec74c
2 changed files with 19 additions and 0 deletions

View File

@ -88,6 +88,17 @@ static int cs35l41_hda_channel_map(struct device *dev, unsigned int tx_num, unsi
unsigned int rx_num, unsigned int *rx_slot)
{
struct cs35l41_hda *cs35l41 = dev_get_drvdata(dev);
static const char * const channel_name[] = { "L", "R" };
if (!cs35l41->amp_name) {
if (*rx_slot >= ARRAY_SIZE(channel_name))
return -EINVAL;
cs35l41->amp_name = devm_kasprintf(cs35l41->dev, GFP_KERNEL, "%s%d",
channel_name[*rx_slot], cs35l41->channel_index);
if (!cs35l41->amp_name)
return -ENOMEM;
}
return cs35l41_set_channels(cs35l41->dev, cs35l41->regmap, tx_num, tx_slot, rx_num,
rx_slot);
@ -345,6 +356,11 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
goto err;
hw_cfg->spk_pos = values[cs35l41->index];
cs35l41->channel_index = 0;
for (i = 0; i < cs35l41->index; i++)
if (values[i] == hw_cfg->spk_pos)
cs35l41->channel_index++;
property = "cirrus,gpio1-func";
ret = device_property_read_u32_array(physdev, property, values, nval);
if (ret)
@ -410,6 +426,7 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
/* check I2C address to assign the index */
cs35l41->index = id == 0x40 ? 0 : 1;
cs35l41->hw_cfg.spk_pos = cs35l41->index;
cs35l41->channel_index = 0;
cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
cs35l41->hw_cfg.bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
hw_cfg->gpio2.func = CS35L41_GPIO2_INT_OPEN_DRAIN;

View File

@ -35,7 +35,9 @@ struct cs35l41_hda {
int irq;
int index;
int channel_index;
unsigned volatile long irq_errors;
const char *amp_name;
struct regmap_irq_chip_data *irq_data;
};