94 lines
3.2 KiB
Plaintext
94 lines
3.2 KiB
Plaintext
|
Linux IOMMU Support
|
||
|
===================
|
||
|
|
||
|
The architecture spec can be obtained from the below location.
|
||
|
|
||
|
http://www.intel.com/technology/virtualization/
|
||
|
|
||
|
This guide gives a quick cheat sheet for some basic understanding.
|
||
|
|
||
|
Some Keywords
|
||
|
|
||
|
DMAR - DMA remapping
|
||
|
DRHD - DMA Engine Reporting Structure
|
||
|
RMRR - Reserved memory Region Reporting Structure
|
||
|
ZLR - Zero length reads from PCI devices
|
||
|
IOVA - IO Virtual address.
|
||
|
|
||
|
Basic stuff
|
||
|
-----------
|
||
|
|
||
|
ACPI enumerates and lists the different DMA engines in the platform, and
|
||
|
device scope relationships between PCI devices and which DMA engine controls
|
||
|
them.
|
||
|
|
||
|
What is RMRR?
|
||
|
-------------
|
||
|
|
||
|
There are some devices the BIOS controls, for e.g USB devices to perform
|
||
|
PS2 emulation. The regions of memory used for these devices are marked
|
||
|
reserved in the e820 map. When we turn on DMA translation, DMA to those
|
||
|
regions will fail. Hence BIOS uses RMRR to specify these regions along with
|
||
|
devices that need to access these regions. OS is expected to setup
|
||
|
unity mappings for these regions for these devices to access these regions.
|
||
|
|
||
|
How is IOVA generated?
|
||
|
---------------------
|
||
|
|
||
|
Well behaved drivers call pci_map_*() calls before sending command to device
|
||
|
that needs to perform DMA. Once DMA is completed and mapping is no longer
|
||
|
required, device performs a pci_unmap_*() calls to unmap the region.
|
||
|
|
||
|
The Intel IOMMU driver allocates a virtual address per domain. Each PCIE
|
||
|
device has its own domain (hence protection). Devices under p2p bridges
|
||
|
share the virtual address with all devices under the p2p bridge due to
|
||
|
transaction id aliasing for p2p bridges.
|
||
|
|
||
|
IOVA generation is pretty generic. We used the same technique as vmalloc()
|
||
|
but these are not global address spaces, but separate for each domain.
|
||
|
Different DMA engines may support different number of domains.
|
||
|
|
||
|
We also allocate gaurd pages with each mapping, so we can attempt to catch
|
||
|
any overflow that might happen.
|
||
|
|
||
|
|
||
|
Graphics Problems?
|
||
|
------------------
|
||
|
If you encounter issues with graphics devices, you can try adding
|
||
|
option intel_iommu=igfx_off to turn off the integrated graphics engine.
|
||
|
|
||
|
Some exceptions to IOVA
|
||
|
-----------------------
|
||
|
Interrupt ranges are not address translated, (0xfee00000 - 0xfeefffff).
|
||
|
The same is true for peer to peer transactions. Hence we reserve the
|
||
|
address from PCI MMIO ranges so they are not allocated for IOVA addresses.
|
||
|
|
||
|
Boot Message Sample
|
||
|
-------------------
|
||
|
|
||
|
Something like this gets printed indicating presence of DMAR tables
|
||
|
in ACPI.
|
||
|
|
||
|
ACPI: DMAR (v001 A M I OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x000000007f5b5ef0
|
||
|
|
||
|
When DMAR is being processed and initialized by ACPI, prints DMAR locations
|
||
|
and any RMRR's processed.
|
||
|
|
||
|
ACPI DMAR:Host address width 36
|
||
|
ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000
|
||
|
ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed91000
|
||
|
ACPI DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000
|
||
|
ACPI DMAR:RMRR base: 0x00000000000ed000 end: 0x00000000000effff
|
||
|
ACPI DMAR:RMRR base: 0x000000007f600000 end: 0x000000007fffffff
|
||
|
|
||
|
When DMAR is enabled for use, you will notice..
|
||
|
|
||
|
PCI-DMA: Using DMAR IOMMU
|
||
|
|
||
|
TBD
|
||
|
----
|
||
|
|
||
|
- For compatibility testing, could use unity map domain for all devices, just
|
||
|
provide a 1-1 for all useful memory under a single domain for all devices.
|
||
|
- API for paravirt ops for abstracting functionlity for VMM folks.
|