OrgACRN
/
acrn-kernel
mirror of https://github.com/projectacrn/acrn-kernel.git
1
0
Fork 0
Code Issues Releases Wiki Activity
acrn-kernel/arch/riscv/configs/nommu_k210_sdcard_defconfig

90 lines
2.4 KiB
Plaintext
Raw Normal View History

riscv: Add Canaan Kendryte K210 SD card defconfig The nommu_k210_defconfig default configuration allows booting a Canaan Kendryte K210 SoC based boards using an embedded intramfs cpio file. Modifying this configuration to enable support for the board SD card is not trivial for all users. To help beginners getting started with these boards, add the nommu_k210_sdcard_defconfig default configuration file to set all configuration options necessary to use the board mmc-spi sd card for the root file system. This new configuration adds support for the block layer, the mmc-spi driver and modifies the boot options to specify the rootfs device as mmcblk0p1 (first partition of the sd card block device). The ext2 file system is selected by default to encourage its use as that results in only about 4KB added to the kernel image size. As ext2 does not have journaling, the boot options specify a read-only mount of the file system. Similarly to the smaller nommu_k210_defconfig, this new default configuration disables virtual terminal support to reduce the kernel image size. The default device tree selected is unchanged, specifying the simple "k210_generic" device tree file. The user must change this setting to specify the device tree suitable for the board being used (sipeed_maix_bit, sipeed_maix_dock, sipeed_maix_go, sipeed_maixduino or canaan_kd233). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-10 13:02:30 +08:00
# CONFIG_CPU_ISOLATION is not set
CONFIG_LOG_BUF_SHIFT=13
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_FHANDLE is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_AIO is not set
# CONFIG_IO_URING is not set
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_KALLSYMS is not set
CONFIG_EMBEDDED=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_COMPAT_BRK is not set
mm, slob: rename CONFIG_SLOB to CONFIG_SLOB_DEPRECATED As explained in [1], we would like to remove SLOB if possible. - There are no known users that need its somewhat lower memory footprint so much that they cannot handle SLUB (after some modifications by the previous patches) instead. - It is an extra maintenance burden, and a number of features are incompatible with it. - It blocks the API improvement of allowing kfree() on objects allocated via kmem_cache_alloc(). As the first step, rename the CONFIG_SLOB option in the slab allocator configuration choice to CONFIG_SLOB_DEPRECATED. Add CONFIG_SLOB depending on CONFIG_SLOB_DEPRECATED as an internal option to avoid code churn. This will cause existing .config files and defconfigs with CONFIG_SLOB=y to silently switch to the default (and recommended replacement) SLUB, while still allowing SLOB to be configured by anyone that notices and needs it. But those should contact the slab maintainers and linux-mm@kvack.org as explained in the updated help. With no valid objections, the plan is to update the existing defconfigs to SLUB and remove SLOB in a few cycles. To make SLUB more suitable replacement for SLOB, a CONFIG_SLUB_TINY option was introduced to limit SLUB's memory overhead. There is a number of defconfigs specifying CONFIG_SLOB=y. As part of this patch, update them to select CONFIG_SLUB and CONFIG_SLUB_TINY. [1] https://lore.kernel.org/all/b35c3f82-f67b-2103-7d82-7a7ba7521439@suse.cz/ Cc: Russell King <linux@armlinux.org.uk> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Conor Dooley <conor@kernel.org> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1 Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> # riscv k210 Acked-by: Arnd Bergmann <arnd@arndb.de> # arm Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Christoph Lameter <cl@linux.com>
2022-11-11 18:04:55 +08:00
CONFIG_SLUB=y
CONFIG_SLUB_TINY=y
riscv: Add Canaan Kendryte K210 SD card defconfig The nommu_k210_defconfig default configuration allows booting a Canaan Kendryte K210 SoC based boards using an embedded intramfs cpio file. Modifying this configuration to enable support for the board SD card is not trivial for all users. To help beginners getting started with these boards, add the nommu_k210_sdcard_defconfig default configuration file to set all configuration options necessary to use the board mmc-spi sd card for the root file system. This new configuration adds support for the block layer, the mmc-spi driver and modifies the boot options to specify the rootfs device as mmcblk0p1 (first partition of the sd card block device). The ext2 file system is selected by default to encourage its use as that results in only about 4KB added to the kernel image size. As ext2 does not have journaling, the boot options specify a read-only mount of the file system. Similarly to the smaller nommu_k210_defconfig, this new default configuration disables virtual terminal support to reduce the kernel image size. The default device tree selected is unchanged, specifying the simple "k210_generic" device tree file. The user must change this setting to specify the device tree suitable for the board being used (sipeed_maix_bit, sipeed_maix_dock, sipeed_maix_go, sipeed_maixduino or canaan_kd233). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-10 13:02:30 +08:00
# CONFIG_MMU is not set
CONFIG_SOC_CANAAN=y
RISC-V: Add CONFIG_{NON,}PORTABLE The RISC-V port has collected a handful of options that are fundamentally non-portable. To prevent users from shooting themselves in the foot, hide them all behind a config entry that explicitly calls out that non-portable binaries may be produced. Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220521193356.26562-1-palmer@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-05-22 03:33:57 +08:00
CONFIG_NONPORTABLE=y
riscv: Add Canaan Kendryte K210 SD card defconfig The nommu_k210_defconfig default configuration allows booting a Canaan Kendryte K210 SoC based boards using an embedded intramfs cpio file. Modifying this configuration to enable support for the board SD card is not trivial for all users. To help beginners getting started with these boards, add the nommu_k210_sdcard_defconfig default configuration file to set all configuration options necessary to use the board mmc-spi sd card for the root file system. This new configuration adds support for the block layer, the mmc-spi driver and modifies the boot options to specify the rootfs device as mmcblk0p1 (first partition of the sd card block device). The ext2 file system is selected by default to encourage its use as that results in only about 4KB added to the kernel image size. As ext2 does not have journaling, the boot options specify a read-only mount of the file system. Similarly to the smaller nommu_k210_defconfig, this new default configuration disables virtual terminal support to reduce the kernel image size. The default device tree selected is unchanged, specifying the simple "k210_generic" device tree file. The user must change this setting to specify the device tree suitable for the board being used (sipeed_maix_bit, sipeed_maix_dock, sipeed_maix_go, sipeed_maixduino or canaan_kd233). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-10 13:02:30 +08:00
CONFIG_SMP=y
CONFIG_NR_CPUS=2
riscv: fix nommu_k210_sdcard_defconfig Instead of an arbitrary delay, use the "rootwait" kernel option to wait for the mmc root device to be ready. Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Fixes: 7e09fd3994c5 ("riscv: Add Canaan Kendryte K210 SD card defconfig") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-02-09 11:56:23 +08:00
CONFIG_CMDLINE="earlycon console=ttySIF0 root=/dev/mmcblk0p1 rootwait ro"
riscv: Add Canaan Kendryte K210 SD card defconfig The nommu_k210_defconfig default configuration allows booting a Canaan Kendryte K210 SoC based boards using an embedded intramfs cpio file. Modifying this configuration to enable support for the board SD card is not trivial for all users. To help beginners getting started with these boards, add the nommu_k210_sdcard_defconfig default configuration file to set all configuration options necessary to use the board mmc-spi sd card for the root file system. This new configuration adds support for the block layer, the mmc-spi driver and modifies the boot options to specify the rootfs device as mmcblk0p1 (first partition of the sd card block device). The ext2 file system is selected by default to encourage its use as that results in only about 4KB added to the kernel image size. As ext2 does not have journaling, the boot options specify a read-only mount of the file system. Similarly to the smaller nommu_k210_defconfig, this new default configuration disables virtual terminal support to reduce the kernel image size. The default device tree selected is unchanged, specifying the simple "k210_generic" device tree file. The user must change this setting to specify the device tree suitable for the board being used (sipeed_maix_bit, sipeed_maix_dock, sipeed_maix_go, sipeed_maixduino or canaan_kd233). Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-10 13:02:30 +08:00
CONFIG_CMDLINE_FORCE=y
# CONFIG_SECCOMP is not set
# CONFIG_STACKPROTECTOR is not set
# CONFIG_GCC_PLUGINS is not set
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_BINFMT_FLAT=y
# CONFIG_COREDUMP is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FW_LOADER is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_BLK_DEV is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_DEVMEM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
# CONFIG_SPI_MEM is not set
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_MMIO=y
# CONFIG_GPIO_CDEV_V1 is not set
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_SIFIVE=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
# CONFIG_PWRSEQ_EMMC is not set
# CONFIG_PWRSEQ_SIMPLE is not set
CONFIG_MMC_SPI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_USER=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set
CONFIG_EXT2_FS=y
# CONFIG_FILE_LOCKING is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_LSM="[]"
CONFIG_PRINTK_TIME=y
# CONFIG_SYMBOLIC_ERRNAME is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_MISC is not set
CONFIG_PANIC_ON_OOPS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_FTRACE is not set
# CONFIG_RUNTIME_TESTING_MENU is not set