License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2015-02-21 06:16:59 +08:00
|
|
|
#include <linux/compiler.h>
|
2019-08-30 03:18:59 +08:00
|
|
|
#include <stdio.h>
|
|
|
|
#include <string.h>
|
2015-02-21 06:16:59 +08:00
|
|
|
#include "builtin.h"
|
|
|
|
#include "perf.h"
|
|
|
|
#include "debug.h"
|
2015-12-15 23:39:39 +08:00
|
|
|
#include <subcmd/parse-options.h>
|
2016-06-24 19:22:07 +08:00
|
|
|
#include "data-convert.h"
|
2015-02-21 06:16:59 +08:00
|
|
|
|
2017-03-27 22:47:20 +08:00
|
|
|
typedef int (*data_cmd_fn_t)(int argc, const char **argv);
|
2015-02-21 06:16:59 +08:00
|
|
|
|
|
|
|
struct data_cmd {
|
|
|
|
const char *name;
|
|
|
|
const char *summary;
|
|
|
|
data_cmd_fn_t fn;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct data_cmd data_cmds[];
|
|
|
|
|
|
|
|
#define for_each_cmd(cmd) \
|
|
|
|
for (cmd = data_cmds; cmd && cmd->name; cmd++)
|
|
|
|
|
2015-03-18 21:35:52 +08:00
|
|
|
static const char * const data_subcommands[] = { "convert", NULL };
|
|
|
|
|
|
|
|
static const char *data_usage[] = {
|
2021-08-25 04:58:29 +08:00
|
|
|
"perf data convert [<options>]",
|
2015-02-21 06:16:59 +08:00
|
|
|
NULL
|
|
|
|
};
|
|
|
|
|
2021-08-25 04:58:29 +08:00
|
|
|
const char *to_json;
|
|
|
|
const char *to_ctf;
|
|
|
|
struct perf_data_convert_opts opts = {
|
|
|
|
.force = false,
|
|
|
|
.all = false,
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
};
|
|
|
|
|
2021-08-25 04:58:29 +08:00
|
|
|
const struct option data_options[] = {
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
OPT_INCR('v', "verbose", &verbose, "be more verbose"),
|
|
|
|
OPT_STRING('i', "input", &input_name, "file", "input file name"),
|
perf data: Add JSON export
This adds a feature to export perf data to JSON.
The resolved symbols are exported into the JSON so that external tools
don't need to load the dsos themselves (or even have access to them at
all.) This makes it easy to load and analyze perf data with standalone
tools where direct perf or libbabeltrace integration is impractical.
The exporter uses a minimal inline JSON encoding without any external
dependencies. Currently it only outputs some headers and sample metadata
but it's easily extensible.
Use it like this:
$ perf data convert --to-json out.json
Committer notes:
Fixup a __printf() bug that broke the build:
util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant
103 | __(printf, 5, 6)
| ^~
| )
util/data-convert-json.c: In function ‘output_sample_callchain_entry’:
util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration]
124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip);
| ^~~~~~~~~~~~~~~~~~~~~~
| output_json_format
Also had to add this patch to fix errors reported by various versions of
clang:
- if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) {
+ if (al && al->sym && al->sym->namelen) {
al->sym->name is a zero sized array, to avoid one extra alloc in the
symbol__new() constructor, sym->namelen carries its strlen.
Committer testing:
$ ls -la out.json
ls: cannot access 'out.json': No such file or directory
$ perf record sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf report --stats | grep -w SAMPLE
SAMPLE events: 8
$ perf data convert --to-json out.json
[ perf data convert: Converted 'perf.data' into JSON data 'out.json' ]
[ perf data convert: Converted and wrote 0.002 MB (8 samples) ]
$ ls -la out.json
-rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json
$ cat out.json
{
"linux-perf-json-version": 1,
"headers": {
"header-version": 1,
"captured-on": "2021-04-26T20:28:57Z",
"data-offset": 432,
"data-size": 1016,
"feat-offset": 1448,
"hostname": "five",
"os-release": "5.11.14-200.fc33.x86_64",
"arch": "x86_64",
"cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor",
"cpuid": "AuthenticAMD,23,113,0",
"nrcpus-online": 24,
"nrcpus-avail": 24,
"perf-version": "5.12.gee134f3189bd",
"cmdline": [
"/home/acme/bin/perf",
"record",
"sleep",
"0.1"
]
},
"samples": [
{
"timestamp": 170517539043684,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6268827"
}
]
},
{
"timestamp": 170517539048443,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa661359d"
}
]
},
{
"timestamp": 170517539051018,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6311e18"
}
]
},
{
"timestamp": 170517539053652,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b4812b",
"symbol": "_dl_start",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539055306,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6269286"
}
]
},
{
"timestamp": 170517539057590,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa62abd8b"
}
]
},
{
"timestamp": 170517539067559,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b5e9e9",
"symbol": "__GI___tunables_init",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539282452,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb779978d2",
"symbol": "getenv",
"dso": "libc-2.32.so"
}
]
}
]
}
$
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 22:47:16 +08:00
|
|
|
OPT_STRING(0, "to-json", &to_json, NULL, "Convert to JSON format"),
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
#ifdef HAVE_LIBBABELTRACE_SUPPORT
|
|
|
|
OPT_STRING(0, "to-ctf", &to_ctf, NULL, "Convert to CTF format"),
|
2020-08-05 17:34:42 +08:00
|
|
|
OPT_BOOLEAN(0, "tod", &opts.tod, "Convert time to wall clock time"),
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
#endif
|
2016-06-24 19:22:07 +08:00
|
|
|
OPT_BOOLEAN('f', "force", &opts.force, "don't complain, do it"),
|
perf data ctf: Add '--all' option for 'perf data convert'
After this patch, 'perf data convert' convert comm events to output CTF
stream.
Result:
# perf record -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.378 MB perf.data (73 samples) ]
# perf data convert --to-ctf ./out.ctf
[ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
[ perf data convert: Converted and wrote 0.003 MB (73 samples) ]
# babeltrace --clock-seconds ./out.ctf/
[10627.402515791] (+?.?????????) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
[10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
... // only sample event is converted
# perf data convert --all --to-ctf ./out.ctf
[ perf data convert: Converted 'perf.data' into CTF data './out.ctf' ]
[ perf data convert: Converted and wrote 0.023 MB (73 samples, 384 non-samples) ]
# babeltrace --clock-seconds ./out.ctf/
[ 0.000000000] (+?.?????????) perf_comm: { cpu_id = 0 }, { pid = 1, tid = 1, comm = "init" }
[ 0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 2, tid = 2, comm = "kthreadd" }
[ 0.000000000] (+0.000000000) perf_comm: { cpu_id = 0 }, { pid = 3, tid = 3, comm = "ksoftirqd/0" }
... // comm events are converted
[10627.402515791] (+10627.402515791) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
[10627.402518972] (+0.000003181) cycles:ppp: { cpu_id = 0 }, { perf_ip = 0xFFFFFFFF81065AF4, perf_tid = 0, perf_pid = 0, perf_period = 1 }
... // samples are also converted
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466767332-114472-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-24 19:22:11 +08:00
|
|
|
OPT_BOOLEAN(0, "all", &opts.all, "Convert all events"),
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
OPT_END()
|
|
|
|
};
|
|
|
|
|
2021-08-25 04:58:29 +08:00
|
|
|
static int cmd_data_convert(int argc, const char **argv)
|
|
|
|
{
|
|
|
|
|
|
|
|
argc = parse_options(argc, argv, data_options,
|
|
|
|
data_usage, 0);
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
if (argc) {
|
2021-08-25 04:58:29 +08:00
|
|
|
usage_with_options(data_usage, data_options);
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
perf data: Add JSON export
This adds a feature to export perf data to JSON.
The resolved symbols are exported into the JSON so that external tools
don't need to load the dsos themselves (or even have access to them at
all.) This makes it easy to load and analyze perf data with standalone
tools where direct perf or libbabeltrace integration is impractical.
The exporter uses a minimal inline JSON encoding without any external
dependencies. Currently it only outputs some headers and sample metadata
but it's easily extensible.
Use it like this:
$ perf data convert --to-json out.json
Committer notes:
Fixup a __printf() bug that broke the build:
util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant
103 | __(printf, 5, 6)
| ^~
| )
util/data-convert-json.c: In function ‘output_sample_callchain_entry’:
util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration]
124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip);
| ^~~~~~~~~~~~~~~~~~~~~~
| output_json_format
Also had to add this patch to fix errors reported by various versions of
clang:
- if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) {
+ if (al && al->sym && al->sym->namelen) {
al->sym->name is a zero sized array, to avoid one extra alloc in the
symbol__new() constructor, sym->namelen carries its strlen.
Committer testing:
$ ls -la out.json
ls: cannot access 'out.json': No such file or directory
$ perf record sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf report --stats | grep -w SAMPLE
SAMPLE events: 8
$ perf data convert --to-json out.json
[ perf data convert: Converted 'perf.data' into JSON data 'out.json' ]
[ perf data convert: Converted and wrote 0.002 MB (8 samples) ]
$ ls -la out.json
-rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json
$ cat out.json
{
"linux-perf-json-version": 1,
"headers": {
"header-version": 1,
"captured-on": "2021-04-26T20:28:57Z",
"data-offset": 432,
"data-size": 1016,
"feat-offset": 1448,
"hostname": "five",
"os-release": "5.11.14-200.fc33.x86_64",
"arch": "x86_64",
"cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor",
"cpuid": "AuthenticAMD,23,113,0",
"nrcpus-online": 24,
"nrcpus-avail": 24,
"perf-version": "5.12.gee134f3189bd",
"cmdline": [
"/home/acme/bin/perf",
"record",
"sleep",
"0.1"
]
},
"samples": [
{
"timestamp": 170517539043684,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6268827"
}
]
},
{
"timestamp": 170517539048443,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa661359d"
}
]
},
{
"timestamp": 170517539051018,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6311e18"
}
]
},
{
"timestamp": 170517539053652,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b4812b",
"symbol": "_dl_start",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539055306,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6269286"
}
]
},
{
"timestamp": 170517539057590,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa62abd8b"
}
]
},
{
"timestamp": 170517539067559,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b5e9e9",
"symbol": "__GI___tunables_init",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539282452,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb779978d2",
"symbol": "getenv",
"dso": "libc-2.32.so"
}
]
}
]
}
$
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 22:47:16 +08:00
|
|
|
if (to_json && to_ctf) {
|
|
|
|
pr_err("You cannot specify both --to-ctf and --to-json.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
2022-02-20 19:39:52 +08:00
|
|
|
#ifdef HAVE_LIBBABELTRACE_SUPPORT
|
perf data: Add JSON export
This adds a feature to export perf data to JSON.
The resolved symbols are exported into the JSON so that external tools
don't need to load the dsos themselves (or even have access to them at
all.) This makes it easy to load and analyze perf data with standalone
tools where direct perf or libbabeltrace integration is impractical.
The exporter uses a minimal inline JSON encoding without any external
dependencies. Currently it only outputs some headers and sample metadata
but it's easily extensible.
Use it like this:
$ perf data convert --to-json out.json
Committer notes:
Fixup a __printf() bug that broke the build:
util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant
103 | __(printf, 5, 6)
| ^~
| )
util/data-convert-json.c: In function ‘output_sample_callchain_entry’:
util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration]
124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip);
| ^~~~~~~~~~~~~~~~~~~~~~
| output_json_format
Also had to add this patch to fix errors reported by various versions of
clang:
- if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) {
+ if (al && al->sym && al->sym->namelen) {
al->sym->name is a zero sized array, to avoid one extra alloc in the
symbol__new() constructor, sym->namelen carries its strlen.
Committer testing:
$ ls -la out.json
ls: cannot access 'out.json': No such file or directory
$ perf record sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf report --stats | grep -w SAMPLE
SAMPLE events: 8
$ perf data convert --to-json out.json
[ perf data convert: Converted 'perf.data' into JSON data 'out.json' ]
[ perf data convert: Converted and wrote 0.002 MB (8 samples) ]
$ ls -la out.json
-rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json
$ cat out.json
{
"linux-perf-json-version": 1,
"headers": {
"header-version": 1,
"captured-on": "2021-04-26T20:28:57Z",
"data-offset": 432,
"data-size": 1016,
"feat-offset": 1448,
"hostname": "five",
"os-release": "5.11.14-200.fc33.x86_64",
"arch": "x86_64",
"cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor",
"cpuid": "AuthenticAMD,23,113,0",
"nrcpus-online": 24,
"nrcpus-avail": 24,
"perf-version": "5.12.gee134f3189bd",
"cmdline": [
"/home/acme/bin/perf",
"record",
"sleep",
"0.1"
]
},
"samples": [
{
"timestamp": 170517539043684,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6268827"
}
]
},
{
"timestamp": 170517539048443,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa661359d"
}
]
},
{
"timestamp": 170517539051018,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6311e18"
}
]
},
{
"timestamp": 170517539053652,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b4812b",
"symbol": "_dl_start",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539055306,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6269286"
}
]
},
{
"timestamp": 170517539057590,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa62abd8b"
}
]
},
{
"timestamp": 170517539067559,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b5e9e9",
"symbol": "__GI___tunables_init",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539282452,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb779978d2",
"symbol": "getenv",
"dso": "libc-2.32.so"
}
]
}
]
}
$
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 22:47:16 +08:00
|
|
|
if (!to_json && !to_ctf) {
|
|
|
|
pr_err("You must specify one of --to-ctf or --to-json.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
2022-02-20 19:39:52 +08:00
|
|
|
#else
|
|
|
|
if (!to_json) {
|
|
|
|
pr_err("You must specify --to-json.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
#endif
|
perf data: Add JSON export
This adds a feature to export perf data to JSON.
The resolved symbols are exported into the JSON so that external tools
don't need to load the dsos themselves (or even have access to them at
all.) This makes it easy to load and analyze perf data with standalone
tools where direct perf or libbabeltrace integration is impractical.
The exporter uses a minimal inline JSON encoding without any external
dependencies. Currently it only outputs some headers and sample metadata
but it's easily extensible.
Use it like this:
$ perf data convert --to-json out.json
Committer notes:
Fixup a __printf() bug that broke the build:
util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant
103 | __(printf, 5, 6)
| ^~
| )
util/data-convert-json.c: In function ‘output_sample_callchain_entry’:
util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration]
124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip);
| ^~~~~~~~~~~~~~~~~~~~~~
| output_json_format
Also had to add this patch to fix errors reported by various versions of
clang:
- if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) {
+ if (al && al->sym && al->sym->namelen) {
al->sym->name is a zero sized array, to avoid one extra alloc in the
symbol__new() constructor, sym->namelen carries its strlen.
Committer testing:
$ ls -la out.json
ls: cannot access 'out.json': No such file or directory
$ perf record sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf report --stats | grep -w SAMPLE
SAMPLE events: 8
$ perf data convert --to-json out.json
[ perf data convert: Converted 'perf.data' into JSON data 'out.json' ]
[ perf data convert: Converted and wrote 0.002 MB (8 samples) ]
$ ls -la out.json
-rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json
$ cat out.json
{
"linux-perf-json-version": 1,
"headers": {
"header-version": 1,
"captured-on": "2021-04-26T20:28:57Z",
"data-offset": 432,
"data-size": 1016,
"feat-offset": 1448,
"hostname": "five",
"os-release": "5.11.14-200.fc33.x86_64",
"arch": "x86_64",
"cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor",
"cpuid": "AuthenticAMD,23,113,0",
"nrcpus-online": 24,
"nrcpus-avail": 24,
"perf-version": "5.12.gee134f3189bd",
"cmdline": [
"/home/acme/bin/perf",
"record",
"sleep",
"0.1"
]
},
"samples": [
{
"timestamp": 170517539043684,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6268827"
}
]
},
{
"timestamp": 170517539048443,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa661359d"
}
]
},
{
"timestamp": 170517539051018,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6311e18"
}
]
},
{
"timestamp": 170517539053652,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b4812b",
"symbol": "_dl_start",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539055306,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6269286"
}
]
},
{
"timestamp": 170517539057590,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa62abd8b"
}
]
},
{
"timestamp": 170517539067559,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b5e9e9",
"symbol": "__GI___tunables_init",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539282452,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb779978d2",
"symbol": "getenv",
"dso": "libc-2.32.so"
}
]
}
]
}
$
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 22:47:16 +08:00
|
|
|
|
|
|
|
if (to_json)
|
|
|
|
return bt_convert__perf2json(input_name, to_json, &opts);
|
|
|
|
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
if (to_ctf) {
|
|
|
|
#ifdef HAVE_LIBBABELTRACE_SUPPORT
|
2016-06-24 19:22:07 +08:00
|
|
|
return bt_convert__perf2ctf(input_name, to_ctf, &opts);
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
#else
|
perf data: Add JSON export
This adds a feature to export perf data to JSON.
The resolved symbols are exported into the JSON so that external tools
don't need to load the dsos themselves (or even have access to them at
all.) This makes it easy to load and analyze perf data with standalone
tools where direct perf or libbabeltrace integration is impractical.
The exporter uses a minimal inline JSON encoding without any external
dependencies. Currently it only outputs some headers and sample metadata
but it's easily extensible.
Use it like this:
$ perf data convert --to-json out.json
Committer notes:
Fixup a __printf() bug that broke the build:
util/data-convert-json.c:103:11: error: expected ‘)’ before numeric constant
103 | __(printf, 5, 6)
| ^~
| )
util/data-convert-json.c: In function ‘output_sample_callchain_entry’:
util/data-convert-json.c:124:2: error: implicit declaration of function ‘output_json_key_format’; did you mean ‘output_json_format’? [-Werror=implicit-function-declaration]
124 | output_json_key_format(out, false, 5, "ip", "\"0x%" PRIx64 "\"", ip);
| ^~~~~~~~~~~~~~~~~~~~~~
| output_json_format
Also had to add this patch to fix errors reported by various versions of
clang:
- if (al && al->sym && al->sym->name && strlen(al->sym->name) > 0) {
+ if (al && al->sym && al->sym->namelen) {
al->sym->name is a zero sized array, to avoid one extra alloc in the
symbol__new() constructor, sym->namelen carries its strlen.
Committer testing:
$ ls -la out.json
ls: cannot access 'out.json': No such file or directory
$ perf record sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (8 samples) ]
$ perf report --stats | grep -w SAMPLE
SAMPLE events: 8
$ perf data convert --to-json out.json
[ perf data convert: Converted 'perf.data' into JSON data 'out.json' ]
[ perf data convert: Converted and wrote 0.002 MB (8 samples) ]
$ ls -la out.json
-rw-rw-r--. 1 acme acme 2017 Apr 26 17:29 out.json
$ cat out.json
{
"linux-perf-json-version": 1,
"headers": {
"header-version": 1,
"captured-on": "2021-04-26T20:28:57Z",
"data-offset": 432,
"data-size": 1016,
"feat-offset": 1448,
"hostname": "five",
"os-release": "5.11.14-200.fc33.x86_64",
"arch": "x86_64",
"cpu-desc": "AMD Ryzen 9 3900X 12-Core Processor",
"cpuid": "AuthenticAMD,23,113,0",
"nrcpus-online": 24,
"nrcpus-avail": 24,
"perf-version": "5.12.gee134f3189bd",
"cmdline": [
"/home/acme/bin/perf",
"record",
"sleep",
"0.1"
]
},
"samples": [
{
"timestamp": 170517539043684,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6268827"
}
]
},
{
"timestamp": 170517539048443,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa661359d"
}
]
},
{
"timestamp": 170517539051018,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6311e18"
}
]
},
{
"timestamp": 170517539053652,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b4812b",
"symbol": "_dl_start",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539055306,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa6269286"
}
]
},
{
"timestamp": 170517539057590,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0xffffffffa62abd8b"
}
]
},
{
"timestamp": 170517539067559,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb77b5e9e9",
"symbol": "__GI___tunables_init",
"dso": "ld-2.32.so"
}
]
},
{
"timestamp": 170517539282452,
"pid": 375844,
"tid": 375844,
"comm": "sleep",
"callchain": [
{
"ip": "0x7fdb779978d2",
"symbol": "getenv",
"dso": "libc-2.32.so"
}
]
}
]
}
$
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/3884969f-804d-2f53-c648-e2b0bd85edff@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-04-26 22:47:16 +08:00
|
|
|
pr_err("The libbabeltrace support is not compiled in. perf should be "
|
|
|
|
"compiled with environment variables LIBBABELTRACE=1 and "
|
|
|
|
"LIBBABELTRACE_DIR=/path/to/libbabeltrace/\n");
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
return -1;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-02-21 06:16:59 +08:00
|
|
|
static struct data_cmd data_cmds[] = {
|
perf data: Add perf data to CTF conversion support
Adding 'perf data convert' to convert perf data file into different
format. This patch adds support for CTF format conversion.
To convert perf.data into CTF run:
$ perf data convert --to-ctf=./ctf-data/
[ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ]
[ perf data convert: Converted and wrote 11.268 MB (100230 samples) ]
The command will create CTF metadata out of perf.data file (or one
specified via -i option) and then convert all sample events into single
CTF stream.
Each sample_type bit is translated into separated CTF event field apart
from following exceptions:
PERF_SAMPLE_RAW - added in next patch
PERF_SAMPLE_READ - TODO
PERF_SAMPLE_CALLCHAIN - TODO
PERF_SAMPLE_BRANCH_STACK - TODO
PERF_SAMPLE_REGS_USER - TODO
PERF_SAMPLE_STACK_USER - TODO
$ perf --debug=data-convert=2 data convert ...
The converted CTF data could be analyzed by CTF tools, like babletrace
or tracecompass [1].
$ babeltrace ./ctf-data/
[03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 }
[03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 }
[03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 }
[03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 }
[03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 }
[03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 }
[03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 }
[03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 }
The following members to the ctf-environment were decided to be added to
distinguish and specify perf CTF data:
- domain
It says "kernel" because it contains a kernel trace (not to be
confused with a user space like lttng-ust does)
- tracer_name
It says perf. This can be used to distinguish between lttng and perf
CTF based trace.
- version
The kernel version from stream. In addition to release, this is what
it looks like on a Debian kernel:
release = "3.14-1-amd64";
version = "3.14.0";
[1] http://projects.eclipse.org/projects/tools.tracecompass
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeremie Galarneau <jgalar@efficios.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 06:17:00 +08:00
|
|
|
{ "convert", "converts data file between formats", cmd_data_convert },
|
2015-02-27 19:53:46 +08:00
|
|
|
{ .name = NULL, },
|
2015-02-21 06:16:59 +08:00
|
|
|
};
|
|
|
|
|
2017-03-27 22:47:20 +08:00
|
|
|
int cmd_data(int argc, const char **argv)
|
2015-02-21 06:16:59 +08:00
|
|
|
{
|
|
|
|
struct data_cmd *cmd;
|
|
|
|
const char *cmdstr;
|
|
|
|
|
2015-03-18 21:35:52 +08:00
|
|
|
argc = parse_options_subcommand(argc, argv, data_options, data_subcommands, data_usage,
|
2015-02-21 06:16:59 +08:00
|
|
|
PARSE_OPT_STOP_AT_NON_OPTION);
|
2021-08-25 04:58:29 +08:00
|
|
|
|
|
|
|
if (!argc) {
|
|
|
|
usage_with_options(data_usage, data_options);
|
|
|
|
return -1;
|
|
|
|
}
|
2015-02-21 06:16:59 +08:00
|
|
|
|
|
|
|
cmdstr = argv[0];
|
|
|
|
|
|
|
|
for_each_cmd(cmd) {
|
|
|
|
if (strcmp(cmd->name, cmdstr))
|
|
|
|
continue;
|
|
|
|
|
2017-03-27 22:47:20 +08:00
|
|
|
return cmd->fn(argc, argv);
|
2015-02-21 06:16:59 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
pr_err("Unknown command: %s\n", cmdstr);
|
2021-08-25 04:58:29 +08:00
|
|
|
usage_with_options(data_usage, data_options);
|
2015-02-21 06:16:59 +08:00
|
|
|
return -1;
|
|
|
|
}
|