OrgACRN
/
acrn-kernel
mirror of https://github.com/projectacrn/acrn-kernel.git
1
0
Fork 0
Code Issues Releases Wiki Activity
acrn-kernel/arch/arm/mach-omap2/vc.h

134 lines
4.4 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 16:11:33 +08:00
/* SPDX-License-Identifier: GPL-2.0-only */
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
/*
* OMAP3/4 Voltage Controller (VC) structure and macro definitions
*
* Copyright (C) 2007, 2010 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
* Lesly A M <x0080970@ti.com>
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008, 2011 Nokia Corporation
* Kalle Jokiniemi
* Paul Walmsley
*/
#ifndef __ARCH_ARM_MACH_OMAP2_VC_H
#define __ARCH_ARM_MACH_OMAP2_VC_H
#include <linux/kernel.h>
OMAP2+: voltage: split voltage controller (VC) code into dedicated layer As part of the voltage layer cleanup, split out VC specific code into a dedicated VC layer. This patch primarily just moves VC code from voltage.c into vc.c, and adds prototypes to vc.h. No functional changes. For readability, each function was given a local 'vc' pointer: struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; and a global replace of s/vdd->vc_data/vc/ was done. Also vc_init was renamed to vc_init_channel to reflect that this is per-VC channel initializtion. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-22 05:08:55 +08:00
struct voltagedomain;
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
/**
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
* struct omap_vc_common - per-VC register/bitfield data
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
* @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register
* @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register
* @regaddr_shift: REGADDR field shift in PRM_VC_BYPASS_VAL register
* @cmd_on_shift: ON field shift in PRM_VC_CMD_VAL_* register
* @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
OMAP3+: VC: make I2C config programmable with PMIC-specific settings Remove hard-coded I2C configuration in favor of settings that can be configured from PMIC-specific values. Currently only high-speed mode and the master-code value are supported, since they were the only fields currently used, but extending this is now trivial. Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse problem and making omap_vc_i2c_init() static, as well as finding and fixing a problem with the shift/mask of mcode. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 07:36:30 +08:00
* @i2c_cfg_reg: I2C configuration register offset
ARM: OMAP2+: Fix omap off idle power consumption creeping up If we use a combination of VMODE and I2C4 for retention modes, eventually the off idle power consumption will creep up by about 23mW, even during off mode with I2C4 always staying enabled. Turns out this is because of erratum i531 "Extra Power Consumed When Repeated Start Operation Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)" as pointed out by Nishanth Menon <nm@ti.com>. Let's fix the issue by adding i2c_cfg_clear_mask for the bits to clear when initializing the I2C4 adapter so we can clear SREN bit that drives the I2C4 lines low otherwise when there is no traffic. Fixes: 3b8c4ebb7630 ("ARM: OMAP3: Fix idle mode signaling for Cc: stable@vger.kernel.org # v3.16+ sys_clkreq and sys_off_mode") Cc: Kevin Hilman <khilman@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-04 23:54:41 +08:00
* @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
OMAP3+: VC: make I2C config programmable with PMIC-specific settings Remove hard-coded I2C configuration in favor of settings that can be configured from PMIC-specific values. Currently only high-speed mode and the master-code value are supported, since they were the only fields currently used, but extending this is now trivial. Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse problem and making omap_vc_i2c_init() static, as well as finding and fixing a problem with the shift/mask of mcode. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 07:36:30 +08:00
* @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
* @i2c_mcode_mask: MCODE field mask for I2C config register
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
*
* XXX One of cmd_on_mask and cmd_on_shift are not needed
* XXX VALID should probably be a shift, not a mask
*/
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
struct omap_vc_common {
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
u32 cmd_on_mask;
u32 valid;
u8 bypass_val_reg;
u8 data_shift;
u8 slaveaddr_shift;
u8 regaddr_shift;
u8 cmd_on_shift;
u8 cmd_onlp_shift;
u8 cmd_ret_shift;
u8 cmd_off_shift;
OMAP3+: VC: make I2C config programmable with PMIC-specific settings Remove hard-coded I2C configuration in favor of settings that can be configured from PMIC-specific values. Currently only high-speed mode and the master-code value are supported, since they were the only fields currently used, but extending this is now trivial. Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse problem and making omap_vc_i2c_init() static, as well as finding and fixing a problem with the shift/mask of mcode. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 07:36:30 +08:00
u8 i2c_cfg_reg;
ARM: OMAP2+: Fix omap off idle power consumption creeping up If we use a combination of VMODE and I2C4 for retention modes, eventually the off idle power consumption will creep up by about 23mW, even during off mode with I2C4 always staying enabled. Turns out this is because of erratum i531 "Extra Power Consumed When Repeated Start Operation Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)" as pointed out by Nishanth Menon <nm@ti.com>. Let's fix the issue by adding i2c_cfg_clear_mask for the bits to clear when initializing the I2C4 adapter so we can clear SREN bit that drives the I2C4 lines low otherwise when there is no traffic. Fixes: 3b8c4ebb7630 ("ARM: OMAP3: Fix idle mode signaling for Cc: stable@vger.kernel.org # v3.16+ sys_clkreq and sys_off_mode") Cc: Kevin Hilman <khilman@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-04 23:54:41 +08:00
u8 i2c_cfg_clear_mask;
OMAP3+: VC: make I2C config programmable with PMIC-specific settings Remove hard-coded I2C configuration in favor of settings that can be configured from PMIC-specific values. Currently only high-speed mode and the master-code value are supported, since they were the only fields currently used, but extending this is now trivial. Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse problem and making omap_vc_i2c_init() static, as well as finding and fixing a problem with the shift/mask of mcode. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 07:36:30 +08:00
u8 i2c_cfg_hsen_mask;
u8 i2c_mcode_mask;
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
};
OMAP3+: VC: abstract out channel configuration VC channel configuration is programmed based on settings coming from the PMIC configuration. Currently, the VC channel to PMIC mapping is a simple one-to-one mapping. Whenever a VC channel parameter is configured (i2c slave addres, PMIC register address, on/ret/off command), the corresponding bits are enabled in the VC channel configuration register. If necessary, the programmability of channel configuration settings could be extended to board/PMIC files, however, because this patch changes the channel configuration to be programmed based on existing values from the PMIC settings, it may not be required. Also note that starting with OMAP4, where there are more than 2 channels, one channel is identified as the "default" channel. When any of the bits in the channel config for the other channels are zero, it means to use the default channel. The OMAP4 TRM (at least through NDA version Q) is wrong in describing which is the default channel. The default channel on OMAP4 is MPU, not CORE as decribed in the TRM. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 06:57:16 +08:00
/* omap_vc_channel.flags values */
#define OMAP_VC_CHANNEL_DEFAULT BIT(0)
OMAP3+: PM: VC: handle mutant channel config for OMAP4 MPU channel On OMAP3+, all VC channels have the the same bitfield ordering for all VC channels, except the OMAP4 MPU channel. This appears to be a freak accident as all other VC channel (including OMAP5) have the standard configuration. Handle the mutant case by adding a per-channel flag to signal the deformity and handle it during VC init. Special thanks to Nishanth Menon <nm@ti.com> for finding this problem and for proposing the initial solution. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-03 08:28:13 +08:00
#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1)
OMAP3+: VC: abstract out channel configuration VC channel configuration is programmed based on settings coming from the PMIC configuration. Currently, the VC channel to PMIC mapping is a simple one-to-one mapping. Whenever a VC channel parameter is configured (i2c slave addres, PMIC register address, on/ret/off command), the corresponding bits are enabled in the VC channel configuration register. If necessary, the programmability of channel configuration settings could be extended to board/PMIC files, however, because this patch changes the channel configuration to be programmed based on existing values from the PMIC settings, it may not be required. Also note that starting with OMAP4, where there are more than 2 channels, one channel is identified as the "default" channel. When any of the bits in the channel config for the other channels are zero, it means to use the default channel. The OMAP4 TRM (at least through NDA version Q) is wrong in describing which is the default channel. The default channel on OMAP4 is MPU, not CORE as decribed in the TRM. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 06:57:16 +08:00
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
/**
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
* struct omap_vc_channel - VC per-instance data
OMAP3+: VC: cleanup i2c slave address configuration - Add an i2c_slave_address field to the omap_vc_channel - use VC/VP read/modify/write helper instead of open-coding - remove smps_sa_shift, use __ffs(mask) for shift value - I2C addresses 10-bit, change size to u16 Special thanks to Shweta Gulati <shweta.gulati@ti.com> for suggesting the use of __ffs(x) instead of ffs(x) - 1. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 05:02:36 +08:00
* @i2c_slave_addr: I2C slave address of PMIC for this VC channel
OMAP3+: VC: cleanup PMIC register address configuration - support both voltage register address and command register address for each VC channel - add fields for voltage register address (volra) and command register address (cmdra) to struct omap_vc_channel - use VC/VP register access read/modify/write helper - remove volra_shift field (use __ffs(mask) for shift value) - I2C addresses 10-bit, change size to u16 Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-10 02:01:55 +08:00
* @volt_reg_addr: voltage configuration register address
* @cmd_reg_addr: command configuration register address
OMAP3+: VC: cleanup voltage setup time configuration - add setup_time field to struct omap_vc_channel (init'd from PMIC data) - use VC/VP register access helper for read/modify/write - move VFSM structure from omap_vdd_info into struct voltagedomain - remove redunant _data suffix from VFSM structures and variables - remove voltsetup_shift, use ffs() on the mask value to find the shift Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 05:36:04 +08:00
* @setup_time: setup time (in sys_clk cycles) of regulator for this channel
OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain Move structure containing PMIC configurable settings into struct voltagedomain. In the process, rename from omap_volt_pmic_info to omap_voltdm_pmic (_info suffix is not helpful.) No functional changes. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 02:01:10 +08:00
* @cfg_channel: current value of VC channel configuration register
OMAP3+: VC: make I2C config programmable with PMIC-specific settings Remove hard-coded I2C configuration in favor of settings that can be configured from PMIC-specific values. Currently only high-speed mode and the master-code value are supported, since they were the only fields currently used, but extending this is now trivial. Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse problem and making omap_vc_i2c_init() static, as well as finding and fixing a problem with the shift/mask of mcode. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 07:36:30 +08:00
* @i2c_high_speed: whether or not to use I2C high-speed mode
OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain Move structure containing PMIC configurable settings into struct voltagedomain. In the process, rename from omap_volt_pmic_info to omap_voltdm_pmic (_info suffix is not helpful.) No functional changes. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 02:01:10 +08:00
*
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
* @common: pointer to VC common data for this platform
OMAP3+: VC: cleanup i2c slave address configuration - Add an i2c_slave_address field to the omap_vc_channel - use VC/VP read/modify/write helper instead of open-coding - remove smps_sa_shift, use __ffs(mask) for shift value - I2C addresses 10-bit, change size to u16 Special thanks to Shweta Gulati <shweta.gulati@ti.com> for suggesting the use of __ffs(x) instead of ffs(x) - 1. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 05:02:36 +08:00
* @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
* @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
OMAP3+: VC: cleanup PMIC register address configuration - support both voltage register address and command register address for each VC channel - add fields for voltage register address (volra) and command register address (cmdra) to struct omap_vc_channel - use VC/VP register access read/modify/write helper - remove volra_shift field (use __ffs(mask) for shift value) - I2C addresses 10-bit, change size to u16 Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-10 02:01:55 +08:00
* @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register
* @cmdval_reg: register for on/ret/off voltage level values for this channel
OMAP2+: VC: more registers are per-channel starting with OMAP5 Starting with OMAP5, the following registers are per-channel and not common to a all VC channels: - SMPS I2C slave address - SMPS voltage register address offset - SMPS cmd/value register address offset - VC channel configuration register Move these from the channel-common struct into the per-channel struct to support OMAP5. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-07-21 07:35:46 +08:00
* @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
* @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start
* @cfg_channel_reg: VC channel configuration register
OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain Move structure containing PMIC configurable settings into struct voltagedomain. In the process, rename from omap_volt_pmic_info to omap_voltdm_pmic (_info suffix is not helpful.) No functional changes. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 02:01:10 +08:00
* @cfg_channel_sa_shift: bit shift for slave address cfg_channel register
OMAP3+: VC: abstract out channel configuration VC channel configuration is programmed based on settings coming from the PMIC configuration. Currently, the VC channel to PMIC mapping is a simple one-to-one mapping. Whenever a VC channel parameter is configured (i2c slave addres, PMIC register address, on/ret/off command), the corresponding bits are enabled in the VC channel configuration register. If necessary, the programmability of channel configuration settings could be extended to board/PMIC files, however, because this patch changes the channel configuration to be programmed based on existing values from the PMIC settings, it may not be required. Also note that starting with OMAP4, where there are more than 2 channels, one channel is identified as the "default" channel. When any of the bits in the channel config for the other channels are zero, it means to use the default channel. The OMAP4 TRM (at least through NDA version Q) is wrong in describing which is the default channel. The default channel on OMAP4 is MPU, not CORE as decribed in the TRM. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 06:57:16 +08:00
* @flags: VC channel-specific flags (optional)
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
*/
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
struct omap_vc_channel {
OMAP3+: VC: cleanup i2c slave address configuration - Add an i2c_slave_address field to the omap_vc_channel - use VC/VP read/modify/write helper instead of open-coding - remove smps_sa_shift, use __ffs(mask) for shift value - I2C addresses 10-bit, change size to u16 Special thanks to Shweta Gulati <shweta.gulati@ti.com> for suggesting the use of __ffs(x) instead of ffs(x) - 1. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 05:02:36 +08:00
/* channel state */
u16 i2c_slave_addr;
OMAP3+: VC: cleanup PMIC register address configuration - support both voltage register address and command register address for each VC channel - add fields for voltage register address (volra) and command register address (cmdra) to struct omap_vc_channel - use VC/VP register access read/modify/write helper - remove volra_shift field (use __ffs(mask) for shift value) - I2C addresses 10-bit, change size to u16 Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-10 02:01:55 +08:00
u16 volt_reg_addr;
u16 cmd_reg_addr;
OMAP3+: VC: abstract out channel configuration VC channel configuration is programmed based on settings coming from the PMIC configuration. Currently, the VC channel to PMIC mapping is a simple one-to-one mapping. Whenever a VC channel parameter is configured (i2c slave addres, PMIC register address, on/ret/off command), the corresponding bits are enabled in the VC channel configuration register. If necessary, the programmability of channel configuration settings could be extended to board/PMIC files, however, because this patch changes the channel configuration to be programmed based on existing values from the PMIC settings, it may not be required. Also note that starting with OMAP4, where there are more than 2 channels, one channel is identified as the "default" channel. When any of the bits in the channel config for the other channels are zero, it means to use the default channel. The OMAP4 TRM (at least through NDA version Q) is wrong in describing which is the default channel. The default channel on OMAP4 is MPU, not CORE as decribed in the TRM. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 06:57:16 +08:00
u8 cfg_channel;
OMAP3+: VC: make I2C config programmable with PMIC-specific settings Remove hard-coded I2C configuration in favor of settings that can be configured from PMIC-specific values. Currently only high-speed mode and the master-code value are supported, since they were the only fields currently used, but extending this is now trivial. Thanks to Nishanth Menon <nm@ti.com> for reporting/fixing a sparse problem and making omap_vc_i2c_init() static, as well as finding and fixing a problem with the shift/mask of mcode. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-31 07:36:30 +08:00
bool i2c_high_speed;
OMAP3+: VC: cleanup i2c slave address configuration - Add an i2c_slave_address field to the omap_vc_channel - use VC/VP read/modify/write helper instead of open-coding - remove smps_sa_shift, use __ffs(mask) for shift value - I2C addresses 10-bit, change size to u16 Special thanks to Shweta Gulati <shweta.gulati@ti.com> for suggesting the use of __ffs(x) instead of ffs(x) - 1. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 05:02:36 +08:00
/* register access data */
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
const struct omap_vc_common *common;
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
u32 smps_sa_mask;
u32 smps_volra_mask;
OMAP3+: VC: cleanup PMIC register address configuration - support both voltage register address and command register address for each VC channel - add fields for voltage register address (volra) and command register address (cmdra) to struct omap_vc_channel - use VC/VP register access read/modify/write helper - remove volra_shift field (use __ffs(mask) for shift value) - I2C addresses 10-bit, change size to u16 Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-06-10 02:01:55 +08:00
u32 smps_cmdra_mask;
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
u8 cmdval_reg;
OMAP2+: VC: more registers are per-channel starting with OMAP5 Starting with OMAP5, the following registers are per-channel and not common to a all VC channels: - SMPS I2C slave address - SMPS voltage register address offset - SMPS cmd/value register address offset - VC channel configuration register Move these from the channel-common struct into the per-channel struct to support OMAP5. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-07-21 07:35:46 +08:00
u8 smps_sa_reg;
u8 smps_volra_reg;
u8 smps_cmdra_reg;
u8 cfg_channel_reg;
OMAP3+: VC: abstract out channel configuration VC channel configuration is programmed based on settings coming from the PMIC configuration. Currently, the VC channel to PMIC mapping is a simple one-to-one mapping. Whenever a VC channel parameter is configured (i2c slave addres, PMIC register address, on/ret/off command), the corresponding bits are enabled in the VC channel configuration register. If necessary, the programmability of channel configuration settings could be extended to board/PMIC files, however, because this patch changes the channel configuration to be programmed based on existing values from the PMIC settings, it may not be required. Also note that starting with OMAP4, where there are more than 2 channels, one channel is identified as the "default" channel. When any of the bits in the channel config for the other channels are zero, it means to use the default channel. The OMAP4 TRM (at least through NDA version Q) is wrong in describing which is the default channel. The default channel on OMAP4 is MPU, not CORE as decribed in the TRM. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-30 06:57:16 +08:00
u8 cfg_channel_sa_shift;
u8 flags;
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
};
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
extern struct omap_vc_channel omap3_vc_mpu;
extern struct omap_vc_channel omap3_vc_core;
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
extern struct omap_vc_channel omap4_vc_mpu;
extern struct omap_vc_channel omap4_vc_iva;
extern struct omap_vc_channel omap4_vc_core;
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains These new structs will hold the sleep voltage levels (omap_vc_params) and voltage processor min / max voltages (omap_vp_params.) Previously these were part of the PMIC struct, but they do not really belong there, as they are OMAP chip specific, not PMIC specific parameters. voltdm code is also changed to use the new structs. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-09-26 00:33:35 +08:00
extern struct omap_vc_param omap3_mpu_vc_data;
extern struct omap_vc_param omap3_core_vc_data;
extern struct omap_vc_param omap4_mpu_vc_data;
extern struct omap_vc_param omap4_iva_vc_data;
extern struct omap_vc_param omap4_core_vc_data;
ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode While debugging legacy mode vs device tree booted PM regressions, I noticed that omap3 is not toggling sys_clkreq and sys_off_mode pins like it should. The sys_clkreq and sys_off_mode pins are not toggling because of the following issues: 1. The default polarity for the sys_off_mode pin is wrong. OFFMODE_POL needs to be cleared for sys_off_mode to go down when hitting off-idle, while CLKREQ_POL needs to be set so sys_clkreq goes down when hitting retention. 2. The values for voltctrl register need to be updated dynamically. We need to set either the retention idle bits, or off idle bits in the voltctrl register depending the idle mode we're targeting to hit. Let's fix these two issues as otherwise the system will just hang if any twl4030 PMIC idle scripts are loaded. The only case where the system does not hang is if only retention idle over I2C4 is configured by the bootloader. Note that even without the twl4030 PMIC scripts, these fixes will do the proper signaling of sys_clkreq and sys_off_mode pins, so the fixes are needed to fix monitoring of PM states with LEDs or an oscilloscope. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:35 +08:00
void omap3_vc_set_pmic_signaling(int core_next_state);
ARM: OMAP2+: Configure voltage controller for retention Similar to existing omap3_vc_set_pmic_signaling(), let's add omap4 specific omap4_vc_set_pmic_signaling(). This allows the configured devices to enable voltage controller for retention later on during init. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-19 06:09:53 +08:00
void omap4_vc_set_pmic_signaling(int core_next_state);
ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode While debugging legacy mode vs device tree booted PM regressions, I noticed that omap3 is not toggling sys_clkreq and sys_off_mode pins like it should. The sys_clkreq and sys_off_mode pins are not toggling because of the following issues: 1. The default polarity for the sys_off_mode pin is wrong. OFFMODE_POL needs to be cleared for sys_off_mode to go down when hitting off-idle, while CLKREQ_POL needs to be set so sys_clkreq goes down when hitting retention. 2. The values for voltctrl register need to be updated dynamically. We need to set either the retention idle bits, or off idle bits in the voltctrl register depending the idle mode we're targeting to hit. Let's fix these two issues as otherwise the system will just hang if any twl4030 PMIC idle scripts are loaded. The only case where the system does not hang is if only retention idle over I2C4 is configured by the bootloader. Note that even without the twl4030 PMIC scripts, these fixes will do the proper signaling of sys_clkreq and sys_off_mode pins, so the fixes are needed to fix monitoring of PM states with LEDs or an oscilloscope. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 08:27:35 +08:00
OMAP2+: voltage: split voltage controller (VC) code into dedicated layer As part of the voltage layer cleanup, split out VC specific code into a dedicated VC layer. This patch primarily just moves VC code from voltage.c into vc.c, and adds prototypes to vc.h. No functional changes. For readability, each function was given a local 'vc' pointer: struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; and a global replace of s/vdd->vc_data/vc/ was done. Also vc_init was renamed to vc_init_channel to reflect that this is per-VC channel initializtion. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-22 05:08:55 +08:00
void omap_vc_init_channel(struct voltagedomain *voltdm);
int omap_vc_pre_scale(struct voltagedomain *voltdm,
unsigned long target_volt,
u8 *target_vsel, u8 *current_vsel);
void omap_vc_post_scale(struct voltagedomain *voltdm,
unsigned long target_volt,
u8 target_vsel, u8 current_vsel);
OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman <khilman@ti.com> merge
2011-03-23 07:14:57 +08:00
int omap_vc_bypass_scale(struct voltagedomain *voltdm,
unsigned long target_volt);
OMAP2+: voltage: split voltage controller (VC) code into dedicated layer As part of the voltage layer cleanup, split out VC specific code into a dedicated VC layer. This patch primarily just moves VC code from voltage.c into vc.c, and adds prototypes to vc.h. No functional changes. For readability, each function was given a local 'vc' pointer: struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; and a global replace of s/vdd->vc_data/vc/ was done. Also vc_init was renamed to vc_init_channel to reflect that this is per-VC channel initializtion. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-22 05:08:55 +08:00
OMAP2+: voltage: reorganize, split code from data This is a first pass at reorganizing mach-omap2/voltage.c: - Separate almost all of the data from the code of mach-omap2/voltage.c. The code remains in mach-omap2/voltage.c. The data goes into one of several places, depending on what type of data it is: - Silicon process/validation data: mach-omap2/opp*_data.c - VC (Voltage Controller) data: mach-omap2/vc*_data.c - VP (Voltage Processor) data: mach-omap2/vp*_data.c - Voltage domain data: mach-omap2/voltagedomains*_data.c The ultimate goal is for all this data to be autogenerated, the same way we autogenerate the rest of our data. - Separate VC and VP common data from VDD-specific VC and VP data. - Separate common voltage.c code from SoC-specific code; reuse common code. - Reorganize structures to avoid unnecessary memory loss due to unpacked fields. There is much left to be done. VC code and VP code should be separated out into vc*.c and vp*.c files. Many fields in the existing structures are superfluous, and should be removed. Some code in voltage.c seems to be duplicated; that code should be moved into functions of its own. Proper voltage domain code should be created, as was done with the powerdomain and clockdomains, and powerdomains should reference voltagedomains. Thanks to Shweta Gulati <shweta.gulati@ti.com> for comments. Thanks to Rajendra Nayak <rnayak@ti.com> for finding and fixing some bugs that prevented OMAP4 from booting: https://patchwork.kernel.org/patch/587311/ His patch has been folded into this one to avoid breaking OMAP4 between patches. Thanks also to Kevin Hilman <khilman@ti.com> for finding and fixing a compile problem when !CONFIG_PM: http://www.spinics.net/lists/arm-kernel/msg118067.html His patch has also been folded into this one to avoid breaking !CONFIG_PM builds. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Shweta Gulati <shweta.gulati@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Kevin Hilman <khilman@ti.com>
2011-03-11 13:17:45 +08:00
#endif