acrn-kernel/arch/arm64/boot/dts/toshiba/Makefile

# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb
dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb
arm64: dts: visconti: Add device tree for TMPV7708 RM main board Add basic support for the Visconti TMPV7708 SoC peripherals - - CPU - CA53 x 4 and 2 cluster. - not support PSCI, currently only spin-table is supported. - Interrupt controller (ARM Generic Interrupt Controller) - Timer (ARM architected timer) - UART (ARM PL011 UART controller) - SPI (ARM PL022 SPI controller) - I2C (Synopsys DesignWare APB I2C Controller) - Pin control (Visconti specific) Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> 2020-04-28 04:59:12 +08:00			`# SPDX-License-Identifier: GPL-2.0`
			`dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-rm-mbrc.dtb`
arm64: dts: visconti: Add DTS for the VisROBO board This board consists of two boards: the SoM board (VRC SoM) with the SoC on board, and the board for I/O (VRB). The functions of each board supported by this update are as follows: - VRC SoM - WDT - GPIO - SDCard (SPI-MMC mode) - I2C x1 - VRB board - VRC SoM - UART x2 - Ethernet phy Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Link: https://lore.kernel.org/r/20211014092703.15251-4-yuji2.ishikawa@toshiba.co.jp Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> 2021-10-14 17:27:03 +08:00			`dtb-$(CONFIG_ARCH_VISCONTI) += tmpv7708-visrobo-vrb.dtb`