114 lines
3.0 KiB
YAML
114 lines
3.0 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: OpenCores I2C controller
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Peter Korsgaard <peter@korsgaard.com>
|
||
|
|
- Andrew Lunn <andrew@lunn.ch>
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: /schemas/i2c/i2c-controller.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
oneOf:
|
||
|
|
- items:
|
||
|
|
- enum:
|
||
|
|
- sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
|
||
|
|
- sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
|
||
|
|
- const: sifive,i2c0
|
||
|
|
- enum:
|
||
|
|
- opencores,i2c-ocores
|
||
|
|
- aeroflexgaisler,i2cmst
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
clock-frequency:
|
||
|
|
description: |
|
||
|
|
clock-frequency property is meant to control the bus frequency for i2c bus
|
||
|
|
drivers, but it was incorrectly used to specify i2c controller input clock
|
||
|
|
frequency. So the following rules are set to fix this situation:
|
||
|
|
- if clock-frequency is present and neither opencores,ip-clock-frequency nor
|
||
|
|
clocks are, then clock-frequency specifies i2c controller clock frequency.
|
||
|
|
This is to keep backwards compatibility with setups using old DTB. i2c bus
|
||
|
|
frequency is fixed at 100 KHz.
|
||
|
|
- if clocks is present it specifies i2c controller clock. clock-frequency
|
||
|
|
property specifies i2c bus frequency.
|
||
|
|
- if opencores,ip-clock-frequency is present it specifies i2c controller
|
||
|
|
clock frequency. clock-frequency property specifies i2c bus frequency.
|
||
|
|
default: 100000
|
||
|
|
|
||
|
|
reg-io-width:
|
||
|
|
description: |
|
||
|
|
io register width in bytes
|
||
|
|
enum: [1, 2, 4]
|
||
|
|
|
||
|
|
reg-shift:
|
||
|
|
description: |
|
||
|
|
device register offsets are shifted by this value
|
||
|
|
default: 0
|
||
|
|
|
||
|
|
regstep:
|
||
|
|
description: |
|
||
|
|
deprecated, use reg-shift above
|
||
|
|
deprecated: true
|
||
|
|
|
||
|
|
opencores,ip-clock-frequency:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||
|
|
description: |
|
||
|
|
Frequency of the controller clock in Hz. Mutually exclusive with clocks.
|
||
|
|
See the note above.
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- "#address-cells"
|
||
|
|
- "#size-cells"
|
||
|
|
|
||
|
|
oneOf:
|
||
|
|
- required:
|
||
|
|
- opencores,ip-clock-frequency
|
||
|
|
- required:
|
||
|
|
- clocks
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
i2c@a0000000 {
|
||
|
|
compatible = "opencores,i2c-ocores";
|
||
|
|
reg = <0xa0000000 0x8>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
interrupts = <10>;
|
||
|
|
opencores,ip-clock-frequency = <20000000>;
|
||
|
|
|
||
|
|
reg-shift = <0>; /* 8 bit registers */
|
||
|
|
reg-io-width = <1>; /* 8 bit read/write */
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@b0000000 {
|
||
|
|
compatible = "opencores,i2c-ocores";
|
||
|
|
reg = <0xa0000000 0x8>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
interrupts = <10>;
|
||
|
|
clocks = <&osc>;
|
||
|
|
clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
|
||
|
|
|
||
|
|
reg-shift = <0>; /* 8 bit registers */
|
||
|
|
reg-io-width = <1>; /* 8 bit read/write */
|
||
|
|
};
|
||
|
|
...
|