acrn-hypervisor/devicemodel/include/xhcireg.h

293 lines
13 KiB
C
Executable File

/* $FreeBSD$ */
/*-
* Copyright (c) 2010 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _XHCIREG_H_
#define _XHCIREG_H_
/* XHCI PCI config registers */
#define PCI_XHCI_CBMEM 0x10 /* configuration base MEM */
#define PCI_XHCI_USBREV 0x60 /* RO USB protocol revision */
#define PCI_USB_REV_3_0 0x30 /* USB 3.0 */
#define PCI_XHCI_FLADJ 0x61 /* RW frame length adjust */
#define PCI_XHCI_INTEL_XUSB2PR 0xD0 /* Intel USB2 Port Routing */
#define PCI_XHCI_INTEL_USB2PRM 0xD4 /* Intel USB2 Port Routing Mask */
#define PCI_XHCI_INTEL_USB3_PSSEN 0xD8 /* Intel USB3 Port SuperSpeed Enable */
#define PCI_XHCI_INTEL_USB3PRM 0xDC /* Intel USB3 Port Routing Mask */
/* XHCI capability registers */
#define XHCI_CAPLENGTH 0x00 /* RO capability */
#define XHCI_RESERVED 0x01 /* Reserved */
#define XHCI_HCIVERSION 0x02 /* RO Interface version number */
#define XHCI_HCIVERSION_0_9 0x0090 /* xHCI version 0.9 */
#define XHCI_HCIVERSION_1_0 0x0100 /* xHCI version 1.0 */
#define XHCI_HCSPARAMS1 0x04 /* RO structural parameters 1 */
#define XHCI_HCS1_DEVSLOT_MAX(x)((x) & 0xFF)
#define XHCI_HCS1_IRQ_MAX(x) (((x) >> 8) & 0x3FF)
#define XHCI_HCS1_N_PORTS(x) (((x) >> 24) & 0xFF)
#define XHCI_HCSPARAMS2 0x08 /* RO structural parameters 2 */
#define XHCI_HCS2_IST(x) ((x) & 0xF)
#define XHCI_HCS2_ERST_MAX(x) (((x) >> 4) & 0xF)
#define XHCI_HCS2_SPR(x) (((x) >> 26) & 0x1)
#define XHCI_HCS2_SPB_MAX(x) ((((x) >> 16) & 0x3E0) | (((x) >> 27) & 0x1F))
#define XHCI_HCSPARAMS3 0x0C /* RO structural parameters 3 */
#define XHCI_HCS3_U1_DEL(x) ((x) & 0xFF)
#define XHCI_HCS3_U2_DEL(x) (((x) >> 16) & 0xFFFF)
#define XHCI_HCSPARAMS0 0x10 /* RO capability parameters */
#define XHCI_HCS0_AC64(x) ((x) & 0x1) /* 64-bit capable */
#define XHCI_HCS0_BNC(x) (((x) >> 1) & 0x1) /* BW negotiation */
#define XHCI_HCS0_CSZ(x) (((x) >> 2) & 0x1) /* context size */
#define XHCI_HCS0_PPC(x) (((x) >> 3) & 0x1) /* port power control */
#define XHCI_HCS0_PIND(x) (((x) >> 4) & 0x1) /* port indicators */
#define XHCI_HCS0_LHRC(x) (((x) >> 5) & 0x1) /* light HC reset */
#define XHCI_HCS0_LTC(x) (((x) >> 6) & 0x1) /* latency tolerance msg */
#define XHCI_HCS0_NSS(x) (((x) >> 7) & 0x1) /* no secondary sid */
/* max pri. stream array size */
#define XHCI_HCS0_PSA_SZ_MAX(x) (((x) >> 12) & 0xF)
/* extended capabilities pointer */
#define XHCI_HCS0_XECP(x) (((x) >> 16) & 0xFFFF)
#define XHCI_DBOFF 0x14 /* RO doorbell offset */
#define XHCI_RTSOFF 0x18 /* RO runtime register space offset */
/* XHCI operational registers. Offset given by XHCI_CAPLENGTH register */
#define XHCI_USBCMD 0x00 /* XHCI command */
#define XHCI_CMD_RS 0x00000001 /* RW Run/Stop */
#define XHCI_CMD_HCRST 0x00000002 /* RW Host Controller Reset */
#define XHCI_CMD_INTE 0x00000004 /* RW Interrupter Enable */
#define XHCI_CMD_HSEE 0x00000008 /* RW Host System Error Enable */
/* RO/RW Light Host Controller Reset */
#define XHCI_CMD_LHCRST 0x00000080
#define XHCI_CMD_CSS 0x00000100 /* RW Controller Save State */
#define XHCI_CMD_CRS 0x00000200 /* RW Controller Restore State */
#define XHCI_CMD_EWE 0x00000400 /* RW Enable Wrap Event */
#define XHCI_CMD_EU3S 0x00000800 /* RW Enable U3 MFINDEX Stop */
#define XHCI_USBSTS 0x04 /* XHCI status */
#define XHCI_STS_HCH 0x00000001 /* RO - Host Controller Halted */
#define XHCI_STS_HSE 0x00000004 /* RW - Host System Error */
#define XHCI_STS_EINT 0x00000008 /* RW - Event Interrupt */
#define XHCI_STS_PCD 0x00000010 /* RW - Port Change Detect */
#define XHCI_STS_SSS 0x00000100 /* RO - Save State Status */
#define XHCI_STS_RSS 0x00000200 /* RO - Restore State Status */
#define XHCI_STS_SRE 0x00000400 /* RW - Save/Restore Error */
#define XHCI_STS_CNR 0x00000800 /* RO - Controller Not Ready */
#define XHCI_STS_HCE 0x00001000 /* RO - Host Controller Error */
#define XHCI_PAGESIZE 0x08 /* XHCI page size mask */
#define XHCI_PAGESIZE_4K 0x00000001 /* 4K Page Size */
#define XHCI_PAGESIZE_8K 0x00000002 /* 8K Page Size */
#define XHCI_PAGESIZE_16K 0x00000004 /* 16K Page Size */
#define XHCI_PAGESIZE_32K 0x00000008 /* 32K Page Size */
#define XHCI_PAGESIZE_64K 0x00000010 /* 64K Page Size */
#define XHCI_DNCTRL 0x14 /* XHCI device notification control */
#define XHCI_DNCTRL_MASK(n) (1U << (n))
#define XHCI_CRCR_LO 0x18 /* XHCI command ring control */
#define XHCI_CRCR_LO_RCS 0x00000001 /* RW - consumer cycle state */
#define XHCI_CRCR_LO_CS 0x00000002 /* RW - command stop */
#define XHCI_CRCR_LO_CA 0x00000004 /* RW - command abort */
#define XHCI_CRCR_LO_CRR 0x00000008 /* RW - command ring running */
#define XHCI_CRCR_LO_MASK 0x0000000F
#define XHCI_CRCR_HI 0x1C /* XHCI command ring control */
#define XHCI_DCBAAP_LO 0x30 /* XHCI dev context BA pointer */
#define XHCI_DCBAAP_HI 0x34 /* XHCI dev context BA pointer */
#define XHCI_CONFIG 0x38
/* RW - number of device slots enabled */
#define XHCI_CONFIG_SLOTS_MASK 0x000000FF
/* XHCI port status registers */
#define XHCI_PORTSC(n) (0x3F0 + (0x10 * (n))) /* XHCI port status */
#define XHCI_PS_CCS 0x00000001 /* RO - current connect status */
#define XHCI_PS_PED 0x00000002 /* RW - port enabled / disabled */
#define XHCI_PS_OCA 0x00000008 /* RO - over current active */
#define XHCI_PS_PR 0x00000010 /* RW - port reset */
/* RW - port link state */
#define XHCI_PS_PLS_GET(x) (((x) >> 5) & 0xF)
/* RW - port link state */
#define XHCI_PS_PLS_SET(x) (((x) & 0xF) << 5)
#define XHCI_PS_PP 0x00000200 /* RW - port power */
#define XHCI_PS_SPEED_GET(x) (((x) >> 10) & 0xF) /* RO - port speed */
/* RW - port indicator */
#define XHCI_PS_PIC_GET(x) (((x) >> 14) & 0x3)
/* RW - port indicator */
#define XHCI_PS_PIC_SET(x) (((x) & 0x3) << 14)
#define XHCI_PS_LWS 0x00010000 /* RW - port link state write strobe */
#define XHCI_PS_CSC 0x00020000 /* RW - connect status change */
#define XHCI_PS_PEC 0x00040000 /* RW - port enable/disable change */
#define XHCI_PS_WRC 0x00080000 /* RW - warm port reset change */
#define XHCI_PS_OCC 0x00100000 /* RW - over-current change */
#define XHCI_PS_PRC 0x00200000 /* RW - port reset change */
#define XHCI_PS_PLC 0x00400000 /* RW - port link state change */
#define XHCI_PS_CEC 0x00800000 /* RW - config error change */
#define XHCI_PS_CAS 0x01000000 /* RO - cold attach status */
#define XHCI_PS_WCE 0x02000000 /* RW - wake on connect enable */
#define XHCI_PS_WDE 0x04000000 /* RW - wake on disconnect enable */
#define XHCI_PS_WOE 0x08000000 /* RW - wake on over-current enable */
#define XHCI_PS_DR 0x40000000 /* RO - device removable */
#define XHCI_PS_WPR 0x80000000U /* RW - warm port reset */
#define XHCI_PS_CLEAR 0x80FF01FFU /* command bits */
/* XHCI status and control */
#define XHCI_PORTPMSC(n) (0x3F4 + (0x10 * (n)))
#define XHCI_PM3_U1TO_GET(x) (((x) >> 0) & 0xFF) /* RW - U1 timeout */
#define XHCI_PM3_U1TO_SET(x) (((x) & 0xFF) << 0) /* RW - U1 timeout */
#define XHCI_PM3_U2TO_GET(x) (((x) >> 8) & 0xFF) /* RW - U2 timeout */
#define XHCI_PM3_U2TO_SET(x) (((x) & 0xFF) << 8) /* RW - U2 timeout */
#define XHCI_PM3_FLA 0x00010000 /* RW - Force Link PM Accept */
#define XHCI_PM2_L1S_GET(x) (((x) >> 0) & 0x7) /* RO - L1 status */
#define XHCI_PM2_RWE 0x00000008 /* RW - remote wakup enable */
/* RW - host initiated resume duration */
#define XHCI_PM2_HIRD_GET(x) (((x) >> 4) & 0xF)
/* RW - host initiated resume duration */
#define XHCI_PM2_HIRD_SET(x) (((x) & 0xF) << 4)
#define XHCI_PM2_L1SLOT_GET(x) (((x) >> 8) & 0xFF) /* RW - L1 device slot */
#define XHCI_PM2_L1SLOT_SET(x) (((x) & 0xFF) << 8) /* RW - L1 device slot */
#define XHCI_PM2_HLE 0x00010000 /* RW - hardware LPM enable */
#define XHCI_PORTLI(n) (0x3F8 + (0x10 * (n))) /* XHCI port link info */
/* RO - port link errors */
#define XHCI_PLI3_ERR_GET(x) (((x) >> 0) & 0xFFFF)
/* XHCI port reserved */
#define XHCI_PORTRSV(n) (0x3FC + (0x10 * (n)))
/* XHCI runtime registers. Offset given by
* XHCI_CAPLENGTH + XHCI_RTSOFF registers
*/
#define XHCI_MFINDEX 0x0000 /* RO - microframe index */
#define XHCI_MFINDEX_GET(x) ((x) & 0x3FFF)
/* XHCI interrupt management */
#define XHCI_IMAN(n) (0x0020 + (0x20 * (n)))
#define XHCI_IMAN_INTR_PEND 0x00000001 /* RW - interrupt pending */
#define XHCI_IMAN_INTR_ENA 0x00000002 /* RW - interrupt enable */
/* XHCI interrupt moderation */
#define XHCI_IMOD(n) (0x0024 + (0x20 * (n)))
#define XHCI_IMOD_IVAL_GET(x) (((x) >> 0) & 0xFFFF) /* 250ns unit */
#define XHCI_IMOD_IVAL_SET(x) (((x) & 0xFFFF) << 0) /* 250ns unit */
#define XHCI_IMOD_ICNT_GET(x) (((x) >> 16) & 0xFFFF) /* 250ns unit */
#define XHCI_IMOD_ICNT_SET(x) (((x) & 0xFFFF) << 16) /* 250ns unit */
#define XHCI_IMOD_DEFAULT 0x000001F4U /* 8000 IRQs/second */
/* 4000 IRQs/second - LynxPoint */
#define XHCI_IMOD_DEFAULT_LP 0x000003F8U
/* XHCI event ring segment table size */
#define XHCI_ERSTSZ(n) (0x0028 + (0x20 * (n)))
#define XHCI_ERSTS_GET(x) ((x) & 0xFFFF)
#define XHCI_ERSTS_SET(x) ((x) & 0xFFFF)
/* XHCI event ring segment table BA */
#define XHCI_ERSTBA_LO(n) (0x0030 + (0x20 * (n)))
/* XHCI event ring segment table BA */
#define XHCI_ERSTBA_HI(n) (0x0034 + (0x20 * (n)))
/* XHCI event ring dequeue pointer */
#define XHCI_ERDP_LO(n) (0x0038 + (0x20 * (n)))
#define XHCI_ERDP_LO_SINDEX(x) ((x) & 0x7) /* RO - dequeue segment index */
#define XHCI_ERDP_LO_BUSY 0x00000008 /* RW - event handler busy */
/* XHCI event ring dequeue pointer */
#define XHCI_ERDP_HI(n) (0x003C + (0x20 * (n)))
/* XHCI doorbell registers
* Offset given by XHCI_CAPLENGTH + XHCI_DBOFF registers
*/
#define XHCI_DOORBELL(n) (0x0000 + (4 * (n)))
#define XHCI_DB_TARGET_GET(x) ((x) & 0xFF) /* RW - doorbell target */
#define XHCI_DB_TARGET_SET(x) ((x) & 0xFF) /* RW - doorbell target */
/* RW - doorbell stream ID */
#define XHCI_DB_SID_GET(x) (((x) >> 16) & 0xFFFF)
/* RW - doorbell stream ID */
#define XHCI_DB_SID_SET(x) (((x) & 0xFFFF) << 16)
/* XHCI legacy support */
#define XHCI_XECP_ID(x) ((x) & 0xFF)
#define XHCI_XECP_NEXT(x) (((x) >> 8) & 0xFF)
#define XHCI_XECP_BIOS_SEM 0x0002
#define XHCI_XECP_OS_SEM 0x0003
/* XHCI capability ID's */
#define XHCI_ID_USB_LEGACY 0x0001
#define XHCI_ID_PROTOCOLS 0x0002
#define XHCI_ID_POWER_MGMT 0x0003
#define XHCI_ID_VIRTUALIZATION 0x0004
#define XHCI_ID_MSG_IRQ 0x0005
#define XHCI_ID_USB_LOCAL_MEM 0x0006
#define XHCI_ID_DRD_INTEL 0x00C0
/*
* xHCI extended capability pointer in HCCPARAMS1.
* The excap offset is calculated by left shift 2
* bits which equals 0x8000
*/
#define XHCI_EXCAP_PTR 0x2000
/* xHCI extended capability group end marker */
#define EXCAP_GROUP_END 0xFFFF
#define EXCAP_GROUP_NULL NULL
/* Intel APL xHCI DRD Configuration registers */
#define XHCI_DRD_MUX_CFG0 0x0000
#define XHCI_DRD_MUX_CFG1 0x0004
#define XCHI_DRD_CFG0_MODE_MASK 0x0003
#define XHCI_DRD_CFG0_DYN 0
#define XHCI_DRD_CFG0_HOST_MODE 1
#define XHCI_DRD_CFG0_DEV_MODE 2
#define XHCI_DRD_CFG0_SYNC (1 << 2)
#define XHCI_DRD_CFG0_SWITCH_EN (1 << 16)
#define XHCI_DRD_CFG0_IDPIN (1 << 20)
#define XHCI_DRD_CFG0_IDPIN_EN (1 << 21)
#define XHCI_DRD_CFG0_VBUS_VALID (1 << 24)
#define XHCI_DRD_CFG1_HOST_MODE (1 << 29)
/* Intel APL xHCI DRD register related bases */
#define XHCI_APL_DRDCAP_BASE 0x8070
#define XHCI_APL_DRDREGS_BASE 0x80D8
/* setting drd for host mode */
#define XHCI_NATIVE_DRD_DEV_MODE "D"
/* setting drd for device mode */
#define XHCI_NATIVE_DRD_HOST_MODE "H"
#define XHCI_NATIVE_DRD_SWITCH_PATH \
"/sys/devices/platform/intel_usb_dr_phy.0/mux_state"
/* return value after setting drd device node */
#define XHCI_NATIVE_DRD_WRITE_SZ 2
/* XHCI register R/W wrappers */
#define XREAD1(sc, what, a) \
bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
(a) + (sc)->sc_##what##_off)
#define XREAD2(sc, what, a) \
bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, \
(a) + (sc)->sc_##what##_off)
#define XREAD4(sc, what, a) \
bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, \
(a) + (sc)->sc_##what##_off)
#define XWRITE1(sc, what, a, x) \
bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
(a) + (sc)->sc_##what##_off, (x))
#define XWRITE2(sc, what, a, x) \
bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, \
(a) + (sc)->sc_##what##_off, (x))
#define XWRITE4(sc, what, a, x) \
bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, \
(a) + (sc)->sc_##what##_off, (x))
#endif /* _XHCIREG_H_ */