495 lines
22 KiB
ReStructuredText
495 lines
22 KiB
ReStructuredText
.. _using_windows_as_uos:
|
||
|
||
Using Windows as Guest VM on ACRN
|
||
#################################
|
||
This tutorial describes how to launch Windows as a Guest (WaaG) VM on the ACRN hypervisor.
|
||
|
||
Hardware setup
|
||
**************
|
||
The following Intel Kaby Lake NUCs are verified:
|
||
|
||
.. csv-table::
|
||
:header: "Platform Model", "BIOS Version", "BIOS Download Link"
|
||
|
||
"NUC7i7DNHE", "DNKBLi7v.86A.0052.2018.0808.1344", "`link <https://downloadcenter.intel.com/download/28886?v=t>`__"
|
||
"NUC7i5DNHE", "DNKBLi5v.86A.0060.2018.1220.1536", "`link <https://downloadcenter.intel.com/download/28885?v=t>`__"
|
||
|
||
ACRN Service VM Setup
|
||
*********************
|
||
You may refer to the steps in :ref:`getting-started-apl-nuc` for
|
||
Intel NUC to set up ACRN on the KBL NUC. After following the steps in that guide,
|
||
you should be able to launch the Service VM successfully.
|
||
|
||
Setup for Using Windows as Guest VM
|
||
***********************************
|
||
All the patches to support WaaG have been upstreamed; you can download them
|
||
from the acrn-hypervisor repository.
|
||
|
||
Build ACRN EFI Images
|
||
=====================
|
||
#. Follow the steps described at :ref:`getting-started-building` to set up the build environment.
|
||
#. Use the ``make`` command to compile the ``acrn.efi`` and ``acrn-dm``::
|
||
|
||
$ git clone https://github.com/projectacrn/acrn-hypervisor.git
|
||
$ cd acrn-hypervisor
|
||
$ make FIRMWARE=uefi BOARD=kbl-nuc-i7
|
||
|
||
#. Get the outputs from::
|
||
|
||
$ build/hypervisor/acrn.efi
|
||
$ build/devicemodel/acrn-dm
|
||
|
||
#. Replace the ``acrn.efi`` and ``acrn-dm`` on your NUC:
|
||
|
||
a. Log in to the ACRN Service VM and then ``mount`` the EFI partition to ``/boot``
|
||
#. ``scp`` the ``acrn.efi`` and ``acrn-dm`` from your host::
|
||
|
||
# scp <acrn.efi from your host> /boot/EFI/acrn/
|
||
# scp <acrn-dm from your host> /usr/bin/
|
||
# chmod +x /usr/bin/acrn-dm && sync
|
||
|
||
Build Service VM Kernel
|
||
=======================
|
||
#. Follow the steps described at :ref:`getting-started-building` to set up the build environment.
|
||
#. Follow the steps below to build the ACRN kernel::
|
||
|
||
$ WORKDIR=`pwd`;
|
||
$ JOBS=`nproc`
|
||
$ git clone -b master https://github.com/projectacrn/acrn-kernel.git
|
||
$ cd acrn-kernel && mkdir -p ${WORKDIR}/{build,build-rootfs}
|
||
$ cp kernel_config_uefi_sos ${WORKDIR}/build/.config
|
||
$ make olddefconfig O=${WORKDIR}/build && make -j${JOBS} O=${WORKDIR}/build
|
||
$ make modules_install INSTALL_MOD_PATH=${WORKDIR}/build-rootfs O=${WORKDIR}/build -j${JOBS}
|
||
|
||
Update Kernel on KBL NUC
|
||
========================
|
||
#. Copy the new kernel image (bzImage) and its modules to the target machine::
|
||
|
||
# scp <your host>:$WORKDIR/build/arch/x86/boot/bzImage /boot/bzImage
|
||
# scp -r <your host>:$WORKDIR/build-rootfs/lib/modules/* /lib/modules/
|
||
# cp /boot/loader/entries/acrn.conf /boot/loader/entries/acrngt.conf
|
||
|
||
#. Modify ``acrngt.conf`` to the content as given below:
|
||
|
||
.. code-block:: none
|
||
|
||
title The ACRNGT Service VM
|
||
linux /bzImage
|
||
options console=tty0 console=ttyS0 root=/dev/sda3 rw rootwait ignore_loglevel no_timer_check consoleblank=0 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x010101 i915.domain_plane_owners=0x011100001111 i915.enable_gvt=1 i915.enable_conformance_check=0 i915.enable_guc=0 hvlog=2M@0x1FE00000
|
||
|
||
.. note:: Change ``/dev/sda3`` to your file system partition.
|
||
|
||
#. ``reboot`` the Service VM and select ``The ACRNGT Service VM`` from the boot menu to apply
|
||
the ACRN kernel and hypervisor updates.
|
||
|
||
Create Windows 10 Image
|
||
=======================
|
||
Create a Windows 10 image which includes two steps:
|
||
|
||
#. Re-generate an ISO that includes winvirtio or virtio-win drivers and the Windows graphics drivers that were pre-installed
|
||
from the original Windows ISO.
|
||
|
||
#. Install Windows 10 onto the virtual disk.
|
||
|
||
Preparations
|
||
------------
|
||
* Download `Windows 10 ADK <https://docs.microsoft.com/en-us/windows-hardware/get-started/adk-install>`_
|
||
according to your working Windows 10 version.
|
||
|
||
.. note:: :kbd:`Win` + :kbd:`R` to open the Run window. Key in ``winver`` to get your working Windows version.
|
||
|
||
* Download `Windows 10 LTSC ISO
|
||
<https://software-download.microsoft.com/download/sg/17763.107.101029-1455.rs5_release_svc_refresh_CLIENT_LTSC_EVAL_x64FRE_en-us.iso>`_.
|
||
|
||
* Download `virtio Windows driver
|
||
<https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.141-1/virtio-win-0.1.141.iso>`_
|
||
to the Service VM in ``/root/img/virtio-win-0.1.141.iso``.
|
||
|
||
* Download `Intel DCH Graphics Driver <https://downloadmirror.intel.com/28148/a08/dch_win64_25.20.100.6444.exe>`_.
|
||
|
||
* Download Oracle Windows driver to Service VM in ``/root/img/winvirtio.iso``.
|
||
* `Oracle Windows driver <https://edelivery.oracle.com/osdc/faces/SoftwareDelivery>`_.Sign in. If you do not have an oracle account, register one.
|
||
* Select "Download Package", key in "Oracle Linux 7.6" and click "Search"
|
||
* Click: DLP: Oracle Linux 7.6, it will be added to your Cart.
|
||
* Click "Checkout" at the top right corner
|
||
* In the "Platforms/Language", select "x86 64 bit", click "Continue"
|
||
* Check " I accept the terms in the license agreement", click "Continue"
|
||
* In the list, right check the item labeled as "Oracle VirtIO Drivers Version for Microsoft Windows 1.x.x, yy MB", and "Save link as ...". At the time of this wiki, it is named as "V982789-01.zip"
|
||
* Click Download, When the download is complete, unzip, you will get one ISO named "winvirtio.iso"
|
||
|
||
Install Windows 10 ADK
|
||
----------------------
|
||
#. Double click ``adksetup.exe`` to start the installation.
|
||
|
||
.. figure:: images/adk_install_1.png
|
||
:align: center
|
||
|
||
#. Click ``Next``.
|
||
|
||
.. figure:: images/adk_install_2.png
|
||
:align: center
|
||
|
||
#. Select ``Deployment Tools`` and ``Windows Preinstallation Environment (Windows PE)``,
|
||
and click ``Install`` to continue the installation.
|
||
|
||
.. note:: You need to install Windows 10 ADK only once.
|
||
|
||
Pre-install drivers and re-generate Windows ISO
|
||
-----------------------------------------------
|
||
#. Create a folder on the ``C:`` drive called ``WIM``, so you have a folder ``C:\WIM``
|
||
|
||
#. Create a folder on the ``C:`` drive called ``Mount``, so you have a folder ``C:\Mount``
|
||
|
||
#. Right click the downloaded ``virtio-win-0.1.141.iso`` and select ``Mount``. The ISO will be mounted to a drive;
|
||
for example, drive ``D:``
|
||
Or used Oracle Driver
|
||
Right click the downloaded ``winvirtio.iso`` and select ``Mount``. The ISO will be mounted to a drive;
|
||
for example, drive ``D:``
|
||
|
||
#. Use ``7-zip`` or similar utility to unzip the downloaded Windows graphics driver
|
||
``dch_win64_25.20.100.6444.exe`` to a folder,
|
||
for example, to ``C:\Dev\Temp\wim\dch_win64_25.20.100.6444``
|
||
|
||
#. Right click the downloaded Windows ISO, for example, ``windows10-17763-107-LTSC.iso``, select ``Mount``,
|
||
the ISO will be mounted to a drive; for example, drive ``E:``
|
||
|
||
#. Copy ``E:\sources\boot.wim`` and ``E:\sources\install.wim`` to ``C:\WIM``
|
||
|
||
#. Depending on your Windows ISO image, more than one image may be included in the ``WIM``.
|
||
Run ``dism /get-wiminfo /wimfile:C:\WIM\install.wim`` with administrator privileges.
|
||
Select the ``Index`` you want. For ``windows10-17763-107-LTSC.iso``,
|
||
there is only one ``Index``; it is ``1``
|
||
|
||
.. figure:: images/install_wim_index.png
|
||
:align: center
|
||
|
||
#. Create a batch file named ``virtio-inject-boot.bat`` [1]_ to modify
|
||
``boot.wim`` to inject drivers (using the mounted Windows ISO drive
|
||
(``D:``), image Index (``1``), and folder where the unzipped Windows
|
||
graphics drivers were placed, from the previous steps (update this
|
||
batch file as needed)::
|
||
|
||
REM virt-inject-boot
|
||
Set IDX=1
|
||
|
||
REM Modify boot.wim file to inject drivers
|
||
dism /Mount-Wim /WimFile:C:\Wim\boot.wim /Index:%IDX% /MountDir:C:\mount
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\balloon\w10\amd64\balloon.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\NetKVM\w10\amd64\netkvm.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\viorng\w10\amd64\viorng.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vioscsi\w10\amd64\vioscsi.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vioserial\w10\amd64\vioser.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\viostor\w10\amd64\viostor.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vioinput\w10\amd64\vioinput.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\cui_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\HdBusExt.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\iigd_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\IntcDAud.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\msdk.inf"
|
||
dism /unmount-wim /mountdir:c:\mount /commit
|
||
|
||
|
||
REM inject-Oracle-driver-install
|
||
Set IDX=1
|
||
|
||
REM Modify boot.wim file to inject drivers
|
||
dism /Mount-Wim /WimFile:C:\WIM\boot.wim /Index:%IDX% /MountDir:C:\mount
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\netkvmorcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\vioinput.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\viorng.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\vioscsiorcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\vioserorcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\viostororcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\cui_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\HdBusExt.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\iigd_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\IntcDAud.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\msdk.inf"
|
||
dism /unmount-wim /mountdir:c:\mount /commit
|
||
|
||
|
||
Run this ``virtio-inject-boot.bat`` script in a command prompt
|
||
running as administrator. It may take 4-5 minutes to run, depending on
|
||
your Windows system performance.
|
||
|
||
#. Similarly, create another batch file named
|
||
``virtio-inject-install.bat`` [1]_ to modify ``install.wim`` to inject
|
||
drivers (and verify the ISO drive, image Index, and drivers folder)::
|
||
|
||
REM virt-inject-install
|
||
Set IDX=1
|
||
|
||
REM Modify install.wim to inject drivers
|
||
dism /Mount-Wim /WimFile:C:\WIM\install.wim /Index:%IDX% /MountDir:C:\mount
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\balloon\w10\amd64\balloon.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\NetKVM\w10\amd64\netkvm.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\viorng\w10\amd64\viorng.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vioscsi\w10\amd64\vioscsi.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vioserial\w10\amd64\vioser.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\viostor\w10\amd64\viostor.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vioinput\w10\amd64\vioinput.inf" /forceunsigned
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\cui_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\HdBusExt.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\iigd_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\IntcDAud.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\msdk.inf"
|
||
dism /unmount-wim /mountdir:c:\mount /commit
|
||
|
||
|
||
REM inject-Oracle-driver-install
|
||
Set IDX=1
|
||
|
||
REM Modify install.wim to inject drivers
|
||
dism /Mount-Wim /WimFile:C:\WIM\install.wim /Index:%IDX% /MountDir:C:\mount
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\netkvmorcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\vioinput.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\viorng.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\vioscsiorcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\vioserorcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:d:\vio\Win10\amd64\viostororcl.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\cui_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\HdBusExt.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\iigd_dch.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\IntcDAud.inf"
|
||
dism /image:C:\mount /Add-Driver "/driver:c:\Dev\Temp\wim\dch_win64_25.20.100.6444\Graphics\msdk.inf"
|
||
dism /unmount-wim /mountdir:c:\mount /commit
|
||
|
||
Run this script in a command prompt running as administrator. It may also
|
||
take 4-5 minutes to run, depending on your Windows system performance.
|
||
|
||
|
||
#. After running these two scripts the files ``C:\WIM\boot.wim`` and ``C:\WIM\install.wim``
|
||
will be updated to install these drivers into the image:
|
||
|
||
- Virtio-balloon
|
||
- Virtio-net
|
||
- Virtio-rng
|
||
- Virtio-scsi
|
||
- Virtio-serial
|
||
- Virtio-block
|
||
- Virtio-input
|
||
- Windows graphics drivers
|
||
|
||
#. Use 7-zip to unzip the downloaded Windows ISO to a folder; for example, into
|
||
``C:\Dev\Temp\wim\windows10-17763-107-LTSC``
|
||
|
||
#. Delete ``C:\Dev\Temp\wim\windows10-17763-107-LTSC\sources\boot.wim`` and
|
||
``C:\Dev\Temp\wim\windows10-17763-107-LTSC\sources\install.wim``
|
||
|
||
#. Copy ``C:\WIM\boot.wim`` and ``C:\WIM\install.wim`` to ``C:\Dev\Temp\wim\windows10-17763-107-LTSC\sources``
|
||
|
||
#. Download and unzip `cdrtools-3.01.a23-bootcd.ru-mkisofs.7z
|
||
<http://reboot.pro/index.php?app=core&module=attach§ion=attach&attach_id=15214>`_ to a folder;
|
||
for example, to ``C:\Dev\Temp\wim\cdrtools-3.01.a23-bootcd.ru-mkisofs``
|
||
|
||
#. Create a batch file named ``mkisofs_both_legacy_and_uefi.bat``
|
||
containing (update folder names as needed to reflect where the
|
||
referenced files are located on your system, and ``inputdir``,
|
||
``outputiso`` and ``mkisofs.exe`` path, downloaded by the previous
|
||
step)::
|
||
|
||
set inputdir=C:\Dev\Temp\wim\windows10-17763-107-LTSC
|
||
set outputiso=C:\Dev\Temp\wim\mkisofs_iso\windows10-17763-107-LTSC-Virtio-Gfx.iso
|
||
set label="WIN10_17763_107_LTSC_VIRTIO_GFX"
|
||
set biosboot=boot/etfsboot.com
|
||
set efiboot=efi/microsoft/boot/efisys.bin
|
||
C:\Dev\Temp\wim\cdrtools-3.01.a23-bootcd.ru-mkisofs\mingw\mkisofs.exe \
|
||
-iso-level 4 -l -R -UDF -D -volid %label% -b %biosboot% -no-emul-boot \
|
||
-boot-load-size 8 -hide boot.catalog -eltorito-alt-boot \
|
||
-eltorito-platform efi -no-emul-boot -b %efiboot% -o %outputiso% \
|
||
%inputdir%
|
||
|
||
Run this ``mkisofs_both_legacy_and_uefi.bat`` script. The resulting
|
||
ISO will be generated in ``outputiso`` location you specified.
|
||
|
||
Create Raw Disk
|
||
---------------
|
||
Run these commands on the Service VM::
|
||
|
||
# swupd bundle-add kvm-host
|
||
# mkdir /root/img
|
||
# cd /root/img
|
||
# qemu-img create -f raw win10-ltsc-virtio.img 30G
|
||
|
||
Install Windows 10
|
||
------------------
|
||
Currently, the ACRNGT OVMF GOP driver is not ready; thus, a special VGA
|
||
version is used to install Windows 10 on ACRN from scratch. The
|
||
``acrn.efi``, ``acrn-dm`` and ``OVMF`` binaries are included in the
|
||
`tarball
|
||
<https://raw.githubusercontent.com/projectacrn/acrn-hypervisor/master/doc/tutorials/install_by_vga_gsg.tar.gz>`_
|
||
together with the script used to install Windows 10.
|
||
|
||
#. Uncompress ``install_by_vga_gsg.tar.gz`` to the Service VM::
|
||
|
||
# tar zxvf install_by_vga_gsg.tar.gz && cd install_by_vga_gsg
|
||
|
||
#. Edit the ``acrn-dm`` command line in ``install_vga.sh`` if your configuration is different.
|
||
|
||
- Change ``-s 3,virtio-blk,./win10-ltsc-virtio.img`` to your path to the Windows 10 image.
|
||
- Change ``-s 8,ahci,cd:./windows10-17763-107-LTSC-Virtio-Gfx.iso`` to the ISO you re-generated above.
|
||
- Change ``-s 9,ahci,cd:./virtio-win-0.1.141.iso`` to your path to the virtio-win iso.
|
||
Or used Oracle driver
|
||
- Change ``-s 9,ahci,cd:./winvirtio.iso`` to your path to the winvirtio iso.
|
||
|
||
#. Run ``install_vga.sh`` and connect to the Windows guest using a vnc client.::
|
||
|
||
# vncviewer <IP-OF-HOST-MACHINE>:5900
|
||
|
||
#. Input ``exit`` followed by :kbd:`ENTER`
|
||
|
||
.. figure:: images/windows_install_1.png
|
||
:align: center
|
||
|
||
#. Select ``Boot Manager``
|
||
|
||
.. figure:: images/windows_install_2.png
|
||
:align: center
|
||
|
||
#. Select ``UEFI ACRN-DM SATA DVD ROM ACRN--F9B7-5503-A05B``, which is using the PCI slot 7.
|
||
This is what we configured in the script for the Windows ISO cdrom.
|
||
|
||
.. figure:: images/windows_install_3.png
|
||
:align: center
|
||
|
||
#. Select :kbd:`ENTER` followed by any key press to be prompted to the Windows installation screen.
|
||
|
||
.. figure:: images/windows_install_4.png
|
||
:align: center
|
||
|
||
.. figure:: images/windows_install_5.png
|
||
:align: center
|
||
|
||
.. figure:: images/windows_install_6.png
|
||
:align: center
|
||
|
||
This is the step to install the Oracle Driver
|
||
|
||
.. figure:: images/windows_install_A.png
|
||
:align: center
|
||
|
||
.. figure:: images/windows_install_B.png
|
||
:align: center
|
||
|
||
.. figure:: images/windows_install_C.png
|
||
:align: center
|
||
|
||
.. figure:: images/windows_install_7.png
|
||
:align: center
|
||
|
||
.. figure:: images/windows_install_8.png
|
||
:align: center
|
||
|
||
#. Connect again after Windows guest reboots. Use ``vncviewer <IP-OF-HOST-MACHINE>:5900``.
|
||
|
||
.. figure:: images/windows_install_9.png
|
||
:align: center
|
||
|
||
#. Connect again after Windows guest reboots a second time. Use ``vncviewer <IP-OF-HOST-MACHINE>:5900``.
|
||
|
||
.. figure:: images/windows_install_10.png
|
||
:align: center
|
||
|
||
#. Perform a few configuration steps. The Windows desktop appears.
|
||
|
||
.. figure:: images/windows_install_11.png
|
||
:align: center
|
||
|
||
.. figure:: images/windows_install_12.png
|
||
:align: center
|
||
|
||
Boot Windows with GVT-g on ACRN
|
||
===============================
|
||
#. Modify the ``/usr/share/acrn/samples/nuc/launch_win.sh`` script to specify the Windows image generated above.
|
||
|
||
#. Run the ``launch_win.sh`` and you should see the WaaG desktop coming up over the HDMI monitor (instead of the VNC).
|
||
|
||
.. note:: Use the following command to disable the GNOME Display Manager (GDM) if it is enabled::
|
||
|
||
# sudo systemctl mask gdm.service
|
||
|
||
.. note:: You must connect two monitors to the KBL NUC in order to launch Windows with
|
||
the default configurations above.
|
||
|
||
.. note:: The second monitor must include the Weston desktop. If you have set up Weston in the Service VM,
|
||
follow the steps in :ref:`skl-nuc-gpu-passthrough` to set up Weston as
|
||
the desktop environment in Service VM in order to experience Windows with the AcrnGT local display feature.
|
||
|
||
|
||
ACRN Windows verified feature list
|
||
**********************************
|
||
* Windows 10 Version:
|
||
|
||
- Microsoft Windows 10 Enterprise, 10.0.17134 Build 17134
|
||
- Microsoft Windows 10 Pro, 10.0.17763 Build 17763
|
||
|
||
* Windows graphics driver:
|
||
|
||
- dch_win64_25.20.100.6444.exe
|
||
|
||
|
||
.. csv-table::
|
||
:header: "Items", "Details", "Status"
|
||
|
||
"IO Devices", "Virtio block as the boot device", "Working"
|
||
, "AHCI as the boot device", "Working"
|
||
, "AHCI cdrom", "Working"
|
||
, "Virtio network", "Working"
|
||
, "Virtio input - mouse", "Working"
|
||
, "Virtio input - keyboard", "Working"
|
||
, "GOP & VNC remote display", "Working"
|
||
"GVT-g", "GVT-g without local display", "Working with 3D benchmark"
|
||
, "GVT-g with local display", "Working with 3D benchmark"
|
||
"Tools", "WinDbg", "Working"
|
||
"Test cases", "Install Windows 10 from scratch", "OK"
|
||
, "Windows reboot", "OK"
|
||
, "Windows shutdown", "OK"
|
||
"Built-in Apps", "Microsoft Edge", "OK"
|
||
, "Maps", "OK"
|
||
, "Microsoft Store", "OK"
|
||
, "3D Viewer", "OK"
|
||
|
||
Known Limitations
|
||
*****************
|
||
* The cursor is not visible with the GVG-g local display.
|
||
* The Windows graphic driver version must be ``dch_win64_25.20.100.6444.exe``;
|
||
the latest version ``dch_win64_25.20.100.6577.exe`` cannot be installed correctly.
|
||
|
||
Device configurations of acrn-dm command line
|
||
*********************************************
|
||
* *-s 3,ahci,hd:/root/img/win10.img*:
|
||
This is the hard disk onto which to install Windows 10.
|
||
Make sure that the slot ID 3 points to your win10 img path.
|
||
|
||
* *-s 4,virtio-net,tap0*:
|
||
This is for the network virtualization.
|
||
|
||
* *-s 5,fbuf,tcp=0.0.0.0:5900,w=800,h=600*:
|
||
This will open a port 5900 on Service VM which can be connected to via vncviewer.
|
||
|
||
* *-s 6,virtio-input,/dev/input/event4*:
|
||
This is to passthrough the mouse/keyboard to Windows via virtio.
|
||
Please change ``event4`` accordingly. You can use the following command to check
|
||
the event node on your Service VM::
|
||
|
||
<To get the input event of mouse>
|
||
# cat /proc/bus/input/devices | grep mouse
|
||
|
||
* *-s 7,ahci,cd:/root/img/Windows.iso*:
|
||
This is the IOS image used to install Windows 10. It appears as a cdrom device.
|
||
Make sure that the slot ID 7 points to your win10 ISO path.
|
||
|
||
* *-s 8,ahci,cd:/root/img/virtio-win-0.1.141.iso*: This is another cdrom device
|
||
to install the virtio Windows driver later. Make sure it points to your VirtIO ISO path.
|
||
|
||
* *--ovmf /usr/share/acrn/bios/OVMF.fd*:
|
||
Make sure it points to your OVMF binary path
|
||
|
||
References
|
||
**********
|
||
|
||
.. [1]
|
||
These virtio drivers injecting batch script are based on Derek Seaman's IT blog about
|
||
`injecting VirtIO Drivers into Windows
|
||
<https://www.derekseaman.com/2015/07/injecting-kvm-virtio-drivers-into-windows.html>`_.
|