acrn-hypervisor/doc/tutorials/using_agl_as_uos.rst

128 lines
4.6 KiB
ReStructuredText
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. _using_agl_as_uos:
Using AGL as the User OS
########################
This tutorial describes the steps to run Automotive Grade Linux (AGL)
as the User OS on ACRN hypervisor and the existing issues we still have.
We hope the steps documented in this article will help others reproduce the
issues we're seeing, and provide information for further debugging.
We're using an Apollo Lake-based NUC model `NUC6CAYH
<https://www.intel.com/content/www/us/en/products/boards-kits/nuc/kits/nuc6cayh.html>`_
and other platforms may be used as well.
.. image:: images/The-overview-of-AGL-as-UOS.png
:align: center
Introduction to AGL
*******************
Automotive Grade Linux is a collaborative open source project that is
bringing together automakers, suppliers, and technology companies to
accelerate the development and adoption of a fully open software stack
for the connected car. With Linux at its core, AGL is developing an open
platform from the ground up that can serve as the de facto industry
standard to enable rapid development of new features and technologies.
For more information about AGL, please visit `AGLs official website
<https://www.automotivelinux.org/>`_.
Steps for using AGL as the UOS
******************************
#. Follow the instructions found in the :ref:`getting-started-apl-nuc` to
boot "The ACRN Service OS"
#. In SOS, download the release of AGL from https://download.automotivelinux.org/AGL/release/eel/.
We're using release ``eel_5.1.0`` for our example:
.. code-block:: none
$ cd ~
$ wget https://download.automotivelinux.org/AGL/release/eel/5.1.0/intel-corei7-64/deploy/images/intel-corei7-64/agl-demo-platform-crosssdk-intel-corei7-64.wic.xz
$ unxz agl-demo-platform-crosssdk-intel-corei7-64.wic.xz
#. Deploy the UOS kernel modules to UOS virtual disk image
.. code-block:: none
$ sudo losetup -f -P --show ~/agl-demo-platform-crosssdk-intel-corei7-64.wic
$ sudo mount /dev/loop0p2 /mnt
$ sudo cp -r /usr/lib/modules/4.19.0-27.iot-lts2018 /mnt/lib/modules/
$ sudo umount /mnt
$ sync
.. note::
Follow the instructions in :ref:`getting-started-apl-nuc`,
the ``linux-iot-lts2018`` kernels and modules will be installed
by default after adding the bundle ``kernel-iot-lts2018``.
Here the version of modules is ``4.19.0-27.iot-lts2018``.
#. Adjust the ``/usr/share/acrn/samples/nuc/launch_uos.sh`` script to match your installation.
These are the couple of lines you need to modify
.. code-block:: none
-s 3,virtio-blk,/root/agl-demo-platform-crosssdk-intel-corei7-64.wic \
-k /usr/lib/kernel/default-iot-lts2018 \
-B "root=/dev/vda2 ...
.. note::
In case you have downloaded a different AGL image or stored the image in another directory,
you will need to modify the AGL file name or directory (the ``-s 3,virtio-blk`` argument)
to match what you have downloaded above.
Likewise, you may need to adjust the kernel file name to ``default-iot-lts2018``.
#. Start the User OS (UOS)
.. code-block:: none
$ sudo /usr/share/acrn/samples/nuc/launch_uos.sh
**Congratulations**, you are now watching the User OS booting up!
And you should be able to see the console of AGL:
.. image:: images/The-console-of-AGL.png
:align: center
When you see this output on the console, AGL has been successfully loaded
and now you can operate on the console.
Enable the AGL display
*************************
By following these setup steps, you will get a black screen in AGL.
We provide a workaround for this black screen in the steps below.
By debugging, we identified the problem as an issue with the (not well supported) ``ivi-shell.so`` library.
We can light the screen with the weston GUI, as shown below.
.. image:: images/The-GUI-of-weston.png
:align: center
To enable weston in AGL, we need to modify weston's ``weston.ini`` configuration file.
.. code-block:: none
$ vim /etc/xdg/weston/weston.ini
Make these changes to ``weston.ini``:
#. Comment ``ivi-shell.so`` out
#. Check the name of output is ``HDMI-A-2``
After that, set up an environment variable and restart the weston service:
.. code-block:: none
$ export XDG_RUNTIME_DIR=/run/platform/display
$ systemctl restart weston
You should now see the weston GUI in AGL.
Follow up
*********
ACRN Hypervisor is expanding support for more operating systems,
and AGL is an example of this effort. We continue to debug the ``ivi-shell.so`` issue,
and investigating why the AGL GUI is not launching as expected.